Australian Capital Territory
Fair Trading (Consumer Product Standards) Regulation 2002 (repealed)    
SL2002-39
made under the
Fair Trading (Consumer Affairs) Act 1973
Republication No 7
Effective:  15 May 2009
Republication date: 15 May 2009
As repealed by SL2009-19 s 15 (1)

Unauthorised version prepared by ACT Parliamentary Counsel’s Office

About this republication
The republished law
This is a republication of the Fair Trading (Consumer Product Standards) Regulation 2002 (repealed), made under the Fair Trading (Consumer Affairs) Act 1973, including any amendment made under the Legislation Act 2001, part 11.3 (Editorial changes).  It also includes any commencement, amendment, repeal or expiry affecting the republished law to 15 May 2009.  
The legislation history and amendment history of the republished law are set out in endnotes 3 and 4. 
Kinds of republications
The Parliamentary Counsel’s Office prepares 2 kinds of republications of ACT laws (see the ACT legislation register at www.legislation.act.gov.au):
•	authorised republications to which the Legislation Act 2001 applies
•	unauthorised republications.
The status of this republication appears on the bottom of each page.
Editorial changes
The Legislation Act 2001, part 11.3 authorises the Parliamentary Counsel to make editorial amendments and other changes of a formal nature when preparing a law for republication.  Editorial changes do not change the effect of the law, but have effect as if they had been made by an Act commencing on the republication date (see Legislation Act 2001, s 115 and s 117).  The changes are made if the Parliamentary Counsel considers they are desirable to bring the law into line, or more closely into line, with current legislative drafting practice.  
This republication does not include amendments made under part 11.3 (see endnote 1).
Uncommenced provisions and amendments
If a provision of the republished law has not commenced or is affected by an uncommenced amendment, the symbol  U  appears immediately before the provision heading.  The text of the uncommenced provision or amendment appears only in the last endnote.
Modifications
If a provision of the republished law is affected by a current modification, the symbol  M  appears immediately before the provision heading.  The text of the modifying provision appears in the endnotes.  For the legal status of modifications, see Legislation Act 2001, section 95.
Penalties
The value of a penalty unit for an offence against this republished law at the republication date is—
	(a)	if the person charged is an individual—$100; or
	(b)	if the person charged is a corporation—$500.

Australian Capital Territory
Fair Trading (Consumer Product Standards) Regulation 2002 (repealed)
made under the
Fair Trading (Consumer Affairs) Act 1973
    
Contents
	Page

Part 1	Preliminary
	1	Name of regulation	2
	2	Dictionary	2
	3	Notes	2
	4	Compliance with specification	2
Part 2	Product safety standards
Division 2.1	Preliminary
	5	Product safety standards	4
	6	Exceptions to consumer product standards generally	4
Division 2.2	Baby bath aids
	7	Definitions for div 2.2	5
	8	Safety standard	5
Division 2.3	Balloon-blowing kits
	9	Definition for div 2.3	5
	10	Safety standard—balloon-blowing kits	6
Division 2.4	Basketball rings and backboards
	11	Definitions—div 2.4	6
	12	Safety standard—warning and symbol for supplied basketball rings and backboards	6
	13	Safety standard—permanent warning on basketball backboard	8
Division 2.5	Beanbags, beanbag covers and packages containing beanbag filling
	14	Definitions for div 2.5	9
	15	Safety standard—beanbags etc	10
Division 2.6	Bunk beds
	16	Definitions for div 2.6	11
	17	Safety standard—bunk beds	11
Division 2.7	Children’s nightwear and paper patterns for children’s nightwear
	18	Definitions for div 2.7	11
	19	Safety standard—children’s nightwear	12
	20	Safety standard—paper patterns for children’s nightwear	12
	21	Amendment of AS/NZS 1249	13
	22	Amendment of ISO 6941	15
Division 2.8	Children’s toys
	23	Definitions for div 2.8	16
	24	Safety standard—children’s toys	16
Division 2.9	Children’s household cots
	25	Definitions for div 2.9	17
	26	Safety standard—household cots	17
Division 2.10	Child restraints in motor vehicles
	27	Definitions for div 2.10	18
	28	Safety standard—child restraints	19
	29	Amendment of AS 1754—1991	20
	30	Supply of components for child restraints complying with AS 1754—1975	20
Division 2.11	Corded internal window coverings
	31	Definitions for div 2.11	21
	32	Safety standard—corded internal window coverings	21
Division 2.12	Flotation toys and swimming aids
	33	Definitions for div 2.12	21
	34	Safety standard—children’s flotation toys etc	22
	35	Amendment of AS 1900	23
Division 2.13	Disposable cigarette lighters
Subdivision 2.13.1	Preliminary
	36	Definitions for div 2.13	23
	37	Meaning of lighter and types of lighters	24
	38	Safety standard—lighters	26
Subdivision 2.13.2	Flame testing, structural safety and labelling
	39	Application of subdiv 2.13.2	26
	40	Testing procedures	26
	41	Ignition and adjustment of flame	27
	42	Abnormal burning	27
	43	Flame height	27
	44	Flame extinction	28
	45	Structural safety	28
	46	Labelling	29
Subdivision 2.13.3	Child resistance
	47	Application of subdiv 2.13.3	30
	48	Child resistance	30
	49	Certification	31
Subdivision 2.13.4	Indexation
	50	Indexed amount	31
Division 2.14	Laser pointers
	51	Definitions for div 2.14	32
	52	Safety standard—laser points	33
Division 2.15	Monkey bikes
	53	Definitions—div 2.15	33
	54	Safety standard—monkey bikes	33
Division 2.16	Pedal bicycles
	55	Definitions for div 2.16	35
	56	Safety standard—pedal bicycles	36
	57	Amendment of AS/NZS 1927	36
Division 2.17	Projectile toys
	58	Definitions for div 2.17	37
	59	Safety standard—projectile toys	37
	60	Exceptions to div 2.17	37
Division 2.18	Protective helmets for pedal cyclists
	61	Definitions for div 2.18	38
	62	Safety standard—protective helmets	39
	63	Exceptions to div 2.18	39
	64	Amendment of AS/NZS 2063	40
	65	Amendment of Snell standard	41
Division 2.19	Sunglasses and fashion spectacles
	66	Definitions for div 2.19	41
	67	Safety standard—sunglasses and fashion spectacles	41
Division 2.20	Vehicle jacks
	68	Definitions for div 2.20	42
	69	Safety standard—vehicle jacks	42
Part 3	Product information standard for care labelling of certain goods
	70	Definitions for pt 3	43
	71	Application of pt 3	43
	72	Product information standard	45
	73	Amendment of AS/NZS 1957	45
	74	Form of information for certain goods	47
	75	Care instructions for goods unable to be washed or dry-cleaned	48
Schedule 1	Test procedures for lighters	49
Part 1.1	General test procedures	49
Part 1.2	Flame height test procedures	49
Part 1.3	Inversion test procedures	50
Part 1.4	Drop test procedures	50
Part 1.5	Temperature test procedures	50
Part 1.6	Pressure test procedure	50
Dictionary		52
Endnotes
	1	About the endnotes	55
	2	Abbreviation key	55
	3	Legislation history	56
	4	Amendment history	57
	5	Earlier republications	79
	6	Renumbered provisions	80

Australian Capital Territory
Fair Trading (Consumer Product Standards) Regulation 2002 (repealed)     

made under the
Fair Trading (Consumer Affairs) Act 1973

    

  

  

Part 1	Preliminary
1	Name of regulation
This regulation is the Fair Trading (Consumer Product Standards) Regulation 2002.
2	Dictionary
The dictionary at the end of this regulation is part of this regulation.
Note 1	The dictionary at the end of this regulation defines certain terms used in this regulation, and includes references (signpost definitions) to other terms defined elsewhere in this regulation.
	For example, the signpost definition ‘laser pointer—see section 51.’ means that the term ‘laser pointer’ is defined in  that section.
Note 2	A definition in the dictionary (including a signpost definition) applies to the entire regulation unless the definition, or another provision of the regulation, provides otherwise or the contrary intention otherwise appears (see Legislation Act, s 155 and s 156 (1)).
3	Notes
A note included in this regulation is explanatory and is not part of this regulation.
Note	See the Legislation Act, s 127 (1), (4) and (5) for the legal status of notes.
4	Compliance with specification
For this regulation, goods do not fail to comply with a standard mentioned in a division relating to the goods only because they do not comply with a provision of the standard—
	(a)	that is expressed to be a recommendation; or
	(b)	in relation to which the word ‘should’ or ‘preferably’ is used to indicate that the provision is only advisory.

Part 2	Product safety standards
Division 2.1	Preliminary
5	Product safety standards
The standards set out in the other divisions of this part are prescribed under the Act, section 25 as consumer product safety standards for the goods to which those divisions apply. 
Note	The consequences of failing to comply with a consumer product safety standard are set out in the Act, s 30.
6	Exceptions to consumer product standards generally
The consumer product safety standards prescribed by this regulation do not apply to the supply of goods in the following circumstances: 
	(a)	for goods supplied under a credit contract (within the meaning of the Consumer Credit (Australian Capital Territory) Code) or under any agreement for the purchase of goods by instalments (for example, a hire-purchase agreement)—if the supplier has at no time had possession of the goods and only became the owner of the goods at or after the time of entering into the agreement;
	(b)	for goods that are let on hire, or that are supplied to someone else for the purpose of being let on hire by the other person—if the letting is incidental to the letting of premises or if the letting was lawful when it began.
Note	The Act, s 30 (2) states other circumstances in which the product safety standards prescribed by this regulation do not apply.
Division 2.2	Baby bath aids
7	Definitions for div 2.2
In this division:
baby bath aids means baby bath aids to which the TPA standard applies.
TPA standard means the consumer product safety standard prescribed for baby bath aids by the Trade Practices (Consumer Product Safety Standard) (Baby Bath Aids) Regulations 2005 (Cwlth) as in force from time to time.
8	Safety standard 
	(1)	The consumer product safety standard for baby bath aids is the TPA standard.
	(2)	The Legislation Act, section 47 (6) does not apply to the TPA standard.
Note 1	The text of an applied, adopted or incorporated law of another jurisdiction, in force from time to time, is taken to be a notifiable instrument if the operation of the Legislation Act, s 47 (6) is not disapplied (see s 47 (7)).
Note 2	Commonwealth regulations are available at www.comlaw.gov.au.
Division 2.3	Balloon-blowing kits
9	Definition for div 2.3
In this division:
balloon-blowing kit means goods that contain a substance that can inflate a balloon by blowing all or part of the substance from a tube (other than a container) contained in the goods.
10	Safety standard—balloon-blowing kits
	(1)	The consumer product safety standard for balloon-blowing kits is that they must comply with subsection (2).
	(2)	The substance contained in a balloon-blowing kit that can be used to inflate a balloon must not contain benzene.
Division 2.4	Basketball rings and backboards
11	Definitions—div 2.4
In this division:
basketball backboard means a raised vertical board with a basketball ring attached, used to play or practise basketball.
basketball ring means a raised circular band of metal or other material (with or without a basket attached) used to play or practise basketball or netball.
12	Safety standard—warning and symbol for supplied basketball rings and backboards
	(1)	The consumer product safety standard for basketball rings and basketball backboards is that, when supplied, they must have—
	(a)	a warning; and
	(b)	a warning symbol.
	(2)	The warning mentioned in subsection (1) (a) must comply with the following requirements:
	(a)	it must contain the following warning:
‘WARNING:  IMPROPER INSTALLATION OR SWINGING ON THE RING MAY CAUSE SERIOUS INJURY OR DEATH’;
	(b)	it must be clearly legible, in upper case, in red letters on a white background;
	(c)	the word ‘WARNING’ must be in characters not less than 15mm in height;
	(d)	the words other than the word ‘WARNING’ must be in characters not less than 10mm in height.
	(3)	The warning symbol mentioned in subsection (1) (b) must comply with the following requirements:
	(a)	it must be in the form of the following graphic:
		
	(b)	the circle that forms part of the graphic must have a diameter of not less than 120mm from outer edge to outer edge;
	(c)	the circle and the diagonal line that form part of the graphic must be in red, and drawn with a line not less than 5mm in width;
	(d)	the basketball player figure that forms part of the graphic must be entirely black;
	(e)	the ring and backboard that form part of the graphic must be outlined in black.
	(4)	If a basketball ring or basketball backboard is supplied in a package, the warning and warning symbol mentioned in subsection (1) must accompany the ring or backboard by being marked—
	(a)	in a conspicuous position on the package; or
	(b)	on a label fixed in a conspicuous position on the package.
	(5)	If a basketball ring or basketball backboard is not supplied in a package, the warning and warning symbol mentioned in subsection (1) must accompany the ring or backboard by being marked—
	(a)	in a conspicuous position on the ring or backboard; or
	(b)	on a label fixed in a conspicuous position on the ring or backboard; or
	(c)	on a tag attached in a conspicuous position on the ring or backboard.
13	Safety standard—permanent warning on basketball backboard
	(1)	The consumer product safety standard for basketball backboards is that they must also have a warning permanently marked on them.
	(2)	The warning must—
	(a)	contain the following warning:
‘WARNING:  SWINGING ON THE RING MAY CAUSE SERIOUS INJURY OR DEATH’; and
	(b)	must be clearly legible, in characters not less than 10mm in height; and
	(c)	must be marked on the backboard in a conspicuous position—
	(i)	in permanent writing; or
	(ii)	on a label that is permanently fixed to the backboard.
Division 2.5	Beanbags, beanbag covers and packages containing beanbag filling
14	Definitions for div 2.5
	(1)	In this division: 
beanbag means a cushion or similar item that consists of a bag or cover surrounding beanbag filling, and includes a beanbag for use in a swimming pool.
beanbag cover means a bag or cover that can be filled with beanbag filling and that, if filled with beanbag filling, would be a beanbag, and includes a bag or cover intended as a separate inner lining.
beanbag filling means pellets, or small particles of polystyrene or other similar synthetic material that can be used as filling for a cushion, but does not include any such pellets or particles when they are mixed with material that cannot be so used.
child-resistant slide fastener means a slide fastener with a sliding piece of a kind mentioned in the definition of slide fastener that—
	(a)	does not have attached to it a tag, handle or other object that would facilitate the movement of the sliding piece; and
	(b)	incorporates a locking mechanism that prevents the sliding piece opening the slide fastener unless a completely separate device is used to disengage the locking mechanism and act as a handle in the moving of the sliding piece between the teeth of the slide fastener.
package means bag, box or other similar container, but does not include a beanbag cover.
slide fastener means a device consisting of 2 sets of teeth, each set of teeth being located on adjacent edges of the device, and having an attached sliding piece that, when moved between the 2 sets of teeth, causes 1 set of teeth to interlock or cease to interlock with the other set of teeth.
	(2)	If a slide fastener has 2 or more sliding pieces of a kind mentioned in subsection (1), definition of slide fastener, a reference in the definition to a sliding piece includes, in relation to the slide fastener, a reference to each of the sliding pieces.
15	Safety standard—beanbags etc
	(1)	The consumer product safety standard for a beanbag or a beanbag cover is that—
	(a)	it must have a label that—
	(i)	is secured to the bag or cover in such a way that the label will, despite normal handling, remain fixed to the bag or cover; and
	(ii)	contains the following warning: 
‘WARNING. Small Lightweight Beads Present a Severe Danger to Children if Swallowed or Inhaled.’; and
	(b)	it must be constructed so that any opening through which beanbag filling may be inserted or removed is fitted with a child-resistant slide fastener.
	(2)	The consumer product safety standard prescribed for a package containing beanbag filling is that it must have a label that—
	(a)	is secured to the package in such a way that the label will, despite normal handling, remain fixed to the package; and
	(b)	contains the warning mentioned in subsection (1) (a) (ii).
	(3)	The warning mentioned in subsection (1) (a) (ii)—
	(a)	must be printed in red letters at least 5mm high on a white background; and
	(b)	must have the word ‘WARNING’ printed in capital letters and the remaining words printed in capital and non-capital letters.
Division 2.6	Bunk beds
16	Definitions for div 2.6
In this division:
bunk beds means bunk beds to which the TPA standard applies.
TPA standard means the consumer product safety standard prescribed for bunk beds under the Trade Practices Act 1974 (Cwlth), section 65E because of Consumer Protection Notice No 1 of 2003.
17	Safety standard—bunk beds
	(1)	The consumer product safety standard for bunk beds is the TPA standard.
	(2)	The standard under subsection (1) is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act.
Division 2.7	Children’s nightwear and paper patterns for children’s nightwear
18	Definitions for div 2.7
In this division: 
AS 1182 means the Australian Standard entitled AS 1182—1997, Size coding scheme for infants’ and children’s clothing—Underwear and outerwear, as published by Standards Australia on 5 March 1997.
AS/NZS 1249 means the Australian/New Zealand Standard entitled AS/NZS 1249:1999, Children’s nightwear and limited daywear having reduced fire hazard, as published jointly by Standards Australia and Standards New Zealand on 5 April 1999.
Note	Standards AS 1182 and AS/NZS 1249 are available on the internet at web site www.standards.com.au.
children’s nightwear includes children’s dressing-gowns, pyjamas, pyjama-style overgarments, nightdresses, nightshirts, bathrobes and infant sleeping-bags, and garments such as all-in-ones and boxer shorts that may be suitable for daywear or nightwear, of any of the sizes 00–14 (as specified in AS 1182), but does not include T-shirts and any article of headwear, leggings (either with or without feet), footwear or handwear.
ISO 6941 means the International Standard entitled Textile fabrics—Burning behaviour—Measurement of flame spread properties of vertically oriented specimens and numbered ISO 6941:1984, published by the International Organization for Standardization on 15 August 1984, as amended by Amendment No 1 of 15 October 1992.
Note	This standard is available on the internet at the web site www.standards.com.au.
19	Safety standard—children’s nightwear
The consumer product safety standard for children’s nightwear is that it must comply with AS/NZS 1249.
20	Safety standard—paper patterns for children’s nightwear
	(1)	The consumer product safety standard for paper patterns for children’s nightwear is that they must comply with AS/NZS 1249, clauses 0.2 and 5.6.
	(2)	The definitions in AS/NZS 1249, clauses 0.5.2, 0.5.3, 0.5.6 and 0.5.10 apply for this section.
21	Amendment of AS/NZS 1249
	(1)	For section 19, AS/NZS 1249 is taken to be amended as mentioned in table 21.1.
Table 21.1	Amendments of AS/NZS 1249 for s 19	
[1.1]	Clause 0.1
omit
It also covers requirements for the labelling of paper patterns for these garments.	
[1.2]	Clause 1.2 (a)
after 1st paragraph, insert
If there is insufficient fabric for 3 lengthwise and 3 widthwise test specimens, as cited in ISO 6941, clause 8.7, the flame spread time is to be decided on 3 lengthwise test specimens only.
If the textile material or garments are constructed with one fabric overlaying another (for example, quilted fabrics), specimens must be cut and tested as a combination, that is, as if the overlay were appliqued to the under fabric.	
[1.3]	Clause 1.2 (a), 3rd paragraph
omit
four or more of six specimens
substitute
3 or more specimens	
[1.4]	Clause 1.2 (a), note
substitute
NOTE:  ISO 6941 is to have effect for this division as if it states that, if in any 1 set of 3 specimens, 1 result exceeds the lowest result by 50% for no apparent reason, or, if 1 or 2 specimens fail to reach 1 of the marker threads, another specimen is required to be tested for that direction or face.	
[1.3]	Clause 1.3
after
use of trims.
insert
The outer fabric of a composite or appliqued area must be considered the fabric face and must be tested so that the flame impinges on that surface.	
[1.4]	Clause 5.6
omit	

	(2)	For section 20, AS/NZS 1249 is taken to be amended as mentioned in table 21.2.
Table 21.2	Amendments of AS/NZS 1249 for s 20	
[2.1]	Clause 0.5.3, notes
omit	
[2.2]	Clause 0.5.10
omit
(See Note 1 to Clause 0.1)	
[2.3]	Clause 5.6
after
shall bear a
insert
clearly visible	

22	Amendment of ISO 6941
ISO 6941 is taken to be amended as mentioned in table 22.
Table 22	Amendments of ISO 6941 for div 2.7	
[3.1]	Clause 8.8
omit
test another set of three specimens for that direction or face
substitute
test another specimen for that direction or face	
[3.2]	Clause 10 k) 4)
substitute
4)	if only 4 specimens are tested, determine the mean from all the results that burn to the respective marker threads. Report the number of specimens that failed to burn to the marker.	
Division 2.8	Children’s toys
23	Definitions for div 2.8
In this division:
children’s toys means children’s toys to which the TPA standard applies.
TPA standard means the consumer product safety standard prescribed for children’s toys under the Trade Practices Act 1974 (Cwlth), section 65E because of Consumer Protection Notice No 14 of 2003.
Note	The standard applies only to toys for children up to and including 36 months old.
24	Safety standard—children’s toys
	(1)	The consumer product safety standard for children’s toys is the TPA standard as in force on 1 July 2005.
	(2)	The standard under subsection (1) is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act.
Division 2.9	Children’s household cots
25	Definitions for div 2.9
In this division: 
AS/NZS 2172 means the Australian/New Zealand Standard entitled AS/NZS 2172:1995, Cots for household use—Safety requirements, as published jointly by Standards Australia and Standards New Zealand on 5 April 1995.
Note	This standard is available on the internet at the web site www.standards.com.au.
household cot means a cot designed for use in household situations, but does not include—
	(a)	a folding portable cot; or
	(b)	a carrycot; or
	(c)	a cradle.
26	Safety standard—household cots
	(1)	The product safety standard prescribed for children’s household cots is that they must comply with AS/NZS 2172, clauses 5, 6, 8, 9, 11 and 12.
	(2)	The definitions in AS/NZS 2172, clause 3 apply for this section.
	(3)	Subsection (1) does not apply to a household cot that is an antique or collectable cot, but only if the antique or collectable cot—
	(a)	is accompanied by a certificate from the supplier to the consumer stating that it is not safe to place a child in the cot; and
	(b)	has 2 clearly visible warning statements (1 external and 1 internal) permanently attached to the cot in the form of a metal plaque glued or attached by nails or screws to the upper half of the side or end of the cot and containing the following warning in the form required by subsection (4): 
WARNING: this cot does not meet the mandatory safety standard. For display purposes only. It is dangerous to place a child in this cot.
	(4)	The warning mentioned in subsection (3) (b) must—
	(a)	contain the capital letters and underlining shown in that paragraph; and
	(b)	have capital letters at least 5mm high and non-capital letters at least 2.5mm high; and
	(c)	have lettering that is in sharp contrast to its background.
Division 2.10	Child restraints in motor vehicles
27	Definitions for div 2.10
In this division: 
AS 1754—1975 means the Australian Standard entitled AS 1754—1975, Child Restraints for Passenger Cars and Derivatives, as amended by Amendment No 1 of February 1976, Amendment No 2 of March 1978, Amendment No 3 of July 1979, the Corrigendum of October 1979 and Amendment No 4 of July 1985.
AS 1754—1991 means the Australian Standard entitled AS 1754—1991, Child restraint systems for use in motor vehicles published on 24 December 1991, as amended by Amendment No 1 of 12 October 1992 and Amendment No 2 of 15 February 1993.
Note	Standards AS 1754—1975 and AS 1754—1991 are available on the internet at web site www.standards.com.au.
chaise means a device—
	(a)	used for raising a child’s position in a motor vehicle or adapting an adult seatbelt to make it suitable for a child; and
	(b)	having a back above the seating plane.
child restraint means a device designed to reduce the risk of bodily injury to a child passenger in a motor vehicle in the event of a motor vehicle impact, and includes—
	(a)	components designed to restrain the child in the device; and
	(b)	components to anchor the device to the motor vehicle; and
	(c)	(if supplied) components to restrain a motor vehicle seat; and
	(d)	chaises; and
	(e)	cushions;
but does not include a child restraint that is an integrated feature of a motor vehicle. 
cushion means a device having no back above the seating plane that is used to—
	(a)	raise a child’s position in a motor vehicle; or
	(b)	place a child in a position in a motor vehicle in which an adult seatbelt can be used properly for the child.
28	Safety standard—child restraints
The consumer product safety standard for child restraints is that they must comply with AS 1754—1991.
29	Amendment of AS 1754—1991
For this division, AS 1754—1991 is taken to be amended as mentioned in table 29.
Table 29	Amendments of AS 1754—1991 for div 2.10	
[5.1]	Clause 1.1
omit
passenger cars and their derivatives
substitute
motor vehicles	
[5.2]	Clause 1.1
omit
The devices may also have application to other types of vehicles.	
[5.3]	Clause 2.4
omit	

30	Supply of components for child restraints complying with AS 1754—1975
For this division, components for child restraints that are made to the requirements of AS 1754—1975 must comply with the relevant requirements of AS 1754—1975.
Division 2.11	Corded internal window coverings
31	Definitions for div 2.11
In this division:
corded internal window coverings means corded internal window coverings to which the NSW standard applies.
NSW standard means the consumer product safety standard prescribed for window coverings in the Fair Trading (General) Regulation 2002 (NSW), division 19 (Corded internal window coverings) as in force when this division commences.
Note	For the Fair Trading (General) Regulation 2002 (NSW), see http://www.legislation.nsw.gov.au.
32	Safety standard—corded internal window coverings
	(1)	The consumer product safety standard for corded internal window coverings is the NSW standard.
	(2)	The standard under subsection (1) is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act.
Division 2.12	Flotation toys and swimming aids
33	Definitions for div 2.12
In this division:
AS 1499 means the Australian Standard entitled AS 1499—1996, Personal flotation devices—Type 2, as published by Standards Australia on 5 January 1996.
AS 1512 means the Australian Standard entitled AS 1512—1996, Personal flotation devices—Type 1, as published by Standards Australia on 5 January 1996.
AS 1900 means the Australian Standard entitled AS 1900—1991, Flotation toys and swimming aids for children published by Standards Australia on 16 September 1991, as amended by Amendment No 1 of 16 August 1993.
Note	Standards AS 1499, AS 1512 and AS 1900 are available on the internet at web site www.standards.com.au.
children’s flotation toys and swimming aids means flotation toys and swimming aids likely to be used by children of any age younger than 15 years in recreational activities or to assist in swimming tuition, including, for example—
	(a)	rings, partial rings, armbands, and kickboards, that are inflatable, hollow moulded or made substantially from expanded foam; and
	(b)	inflatable toy boats having fewer than 3 separate chambers, or having a length and width the total of which is less than 3m; and
	(c)	swimming vests and flotation bubbles;
but not including—
	(d)	goods for therapeutic use by people with a disability; or
	(e)	goods for use as life jackets that comply, or that comply substantially, with AS 1512; or
	(f)	goods for use as buoyancy vests that comply, or that comply substantially, with AS 1499; or
	(g)	goods for use mainly as a means of flotation for people in water and in need of rescue, including goods carried in or on ships or boats for such a purpose.
34	Safety standard—children’s flotation toys etc
The consumer product safety standard for children’s flotation toys and swimming aids is that they must comply with AS 1900.
35	Amendment of AS 1900
For this division, AS 1900 is taken to be amended as mentioned in table 35.
Table 35	Amendments of AS 1900 for div 2.12	
[6.1]	Clause 1.1
omit	

Division 2.13	Disposable cigarette lighters
Subdivision 2.13.1	Preliminary
36	Definitions for div 2.13
In this division: 
adjustable lighter means a lighter with provision for flame height adjustment.
American standard means the Consumer Product Safety Standard for Cigarette Lighters (16 CFR 1210): 
	(a)	set out in the Code of Federal Regulations, title 16, part 1210; and
	(b)	published in the Federal Register of the United States of America, volume 58, No 131, on 12 July 1993 and revised as of 1 January 2001.
Note	This standard is available on the internet at the web site http://lula.law.cornell.edu/cfr/cfr.php
customs value for a device means the customs value determined for the device under the Customs Act 1901 (Cwlth), section 159.
disposable lighter—see section 37 (4).
ex-works agreement means an agreement for the supply of goods under which the supplier’s obligation to deliver the goods is fulfilled when the supplier makes the goods available to the buyer at the supplier’s premises.
indexed amount—see section 50.
lighter—see section 37.
non-adjustable lighter means a lighter with no provision for flame height adjustment.
novelty lighter—see section 37 (5).
refillable lighter—see section 37 (6).
safe operation, for a lighter, means operation of the lighter so that it—
	(a)	does not spit or sputter; and
	(b)	does not produce an abnormal or unsafe flame; and
	(c)	cannot be operated easily by a young child.
spit or sputter, for a flame produced by a lighter, means the escape of liquid fuel from the lighter producing burning liquid droplets that separate from the flame.
young child means a child who is younger than 5 years old.
37	Meaning of lighter and types of lighters
	(1)	A lighter is a flame producing device that—
	(a)	is designed to light cigarettes, cigars and pipes; and
	(b)	is an eligible device.
	(2)	For subsection (1), a flame producing device is an eligible device if—
	(a)	it is intended to be discarded when its fuel supply is exhausted; or
	(b)	has a separate container of fuel intended to be discarded when it is empty; or
	(c)	it is designed to have an entertaining audio or visual effect (other than production of a flame); or 
Example
a device that plays musical notes or displays flashing lights
	(d)	it is designed to depict or resemble, in physical form or function, an article commonly recognised as appealing to, or intended for use by, a young child. 
Examples
a beverage, cartoon character, food, gun, musical instrument, toy, toy animal, watch or vehicle
Note	An example is part of the regulation, is not exhaustive and may extend, but does not limit, the meaning of the provision in which it appears (see Legislation Act, s 126 and s 132).
	(3)	For subsection (1), a flame producing device is also an eligible device if—
	(a)	it is designed to be refilled with fuel; and
	(b)	its value is less than the relevant amount.
	(4)	A disposable lighter is a lighter that is an eligible device mentioned in subsection (2) (a) or (b).
	(5)	A novelty lighter is a lighter that is an eligible device mentioned in subsection (2) (c) or (d).
	(6)	A refillable lighter is a lighter that is an eligible device mentioned in subsection (3).
	(7)	For subsection (3):
relevant amount means—
	(a)	for a device imported into Australia, or supplied under an ex-works agreement, before 1 August 2003—$5; or
	(b)	for a device imported into Australia, or supplied under an ex-works agreement, on or after 1 August 2003—the indexed amount.
value, for a device, means—
	(a)	for a device imported into Australia—its customs value; or
	(b)	for another device—its supply price.
38	Safety standard—lighters
The consumer product safety standard for lighters is that they must comply with the requirements of this division.
Subdivision 2.13.2	Flame testing, structural safety and labelling
39	Application of subdiv 2.13.2
This subdivision does not apply to a lighter that—
	(a)	is a novelty lighter; and
	(b)	is not a disposable lighter or a refillable lighter.
40	Testing procedures
When a lighter is tested in accordance with the procedures described in schedule 1, part 1.2, part 1.3, part 1.4, part 1.5 or part 1.6 the test must be performed in accordance with the procedures described in schedule 1, part 1.1.
41	Ignition and adjustment of flame
	(1)	A lighter must be designed so that deliberate action is necessary to ignite and sustain a flame.
	(2)	An adjustable lighter must be designed so that deliberate action is necessary to adjust the height of the flame.
42	Abnormal burning
After being tested in accordance with schedule 1, part 1.4, part 1.5 and part 1.6, a lighter must not spit or sputter or produce an abnormal or unsafe flame when tested in accordance with schedule 1, part 1.2 and part 1.3.
43	Flame height
	(1)	A lighter must comply with subsection (2) when tested in accordance with schedule 1, part 1.2 —
	(a)	after being tested in accordance with schedule 1, part 1.4 or part 1.5; or
	(b)	after being tested in accordance with schedule 1, part 1.4 and part 1.5.
	(2)	For subsection (1), the height of the flame produced by a lighter must not exceed—
	(a)	for a non-adjustable lighter—50mm; and
	(b)	for an adjustable lighter—
	(i)	if the lighter is adjusted to produce the maximum flame height—150mm; and
	(ii)	if the lighter is adjusted to produce the minimum flame height—100mm.
	(3)	If the flame height of an adjustable lighter has not been adjusted after being supplied in trade or commerce, the lighter must not, when first used after being supplied, produce a flame exceeding 125mm in height.
44	Flame extinction
	(1)	A non-adjustable lighter must comply with subsection (2) after being tested in accordance with the procedures described in schedule 1, part 1.3, part 1.4 and part 1.5.
	(2)	After the lighter has produced a flame for 10 seconds, the flame produced must extinguish after cessation of the action sustaining the flame within 2 seconds if the lighter has no flameguard or 4 seconds if it has a flameguard.
	(3)	An adjustable lighter must comply with subsection (4) after being tested in accordance with the procedures described in schedule 1, part 1.3, part 1.4 and part 1.5.
	(4)	After the lighter has produced a flame for 5 seconds at the maximum flame height adjustment, or a flame for 10 seconds at the minimum flame height adjustment, the flame produced must extinguish after cessation of the action sustaining the flame within 2 seconds if the lighter has no flameguard or 4 seconds if it has a flameguard.
45	Structural safety
	(1)	A lighter must have no sharp external edges.
	(2)	A lighter, when tested in accordance with schedule 1, part 1.3, part 1.4 or part 1.5, must not be damaged so as to affect its safe operation.
	(3)	A lighter, when tested in accordance with schedule 1, part 1.4 must not spontaneously ignite.
	(4)	The internal pressure of the fuel reservoir of a lighter when tested in accordance with schedule 1, part 1.6 must not suddenly decrease.
46	Labelling
	(1)	A lighter must incorporate (as a permanent part of the lighter) in a legible form—
	(a)	the name or other identification of the manufacturer or distributor of the lighter; and
	(b)	if the lighter is an adjustable lighter—symbols indicating the direction in which force is to be applied to increase or decrease the flame height and the effect of the application of force in that direction.
	(2)	A lighter must also have either—
	(a)	the following information that is enclosed by inverted commas displayed in a legible form on the lighter or on an adhesive label that is attached to the lighter:
	(i)	‘WARNING’ in capital letters and adjacent to the words that must be displayed under subparagraphs (ii) to (ix);
	(ii)	‘KEEP AWAY FROM CHILDREN’ or ‘KEEP OUT OF REACH OF CHILDREN’ in capital letters;
	(iii)	‘Ignite lighter away from face and clothing’;
	(iv)	‘Never expose to heat above 50°C or to prolonged sunlight’;
	(v)	‘Never puncture or put in fire’;
	(vi)	for a lighter that contains flammable gas under pressure—‘Contains flammable gas under pressure’;
	(vii)	for a lighter that contains flammable liquid—‘Contains flammable liquid’;
	(viii)	for a self-extinguishing lighter—‘Be sure flame is out after use’;
	(ix)	for a non-self-extinguishing lighter—‘This lighter does not extinguish itself—close the cover to put out’; or
	(b)	if the lighter is sold at retail in a package—the information required to be displayed by paragraph (a) in a legible form on the package in a way that complies with that paragraph.
Subdivision 2.13.3	Child resistance
47	Application of subdiv 2.13.3
This subdivision applies only to a lighter to which the American standard would apply if the lighter were imported into the United States of America after 12 July 1994.
48	Child resistance
	(1)	A lighter must be of a kind that has been—
	(a)	tested in the way set out in the American standard, section 1210.4; and
	(b)	shown to be resistant to successful operation by at least 85% of the child-test panel when tested in that way.
	(2)	The mechanism or system of a lighter that is designed or intended to make the lighter resistant to successful operation by at least 85% of the child-test panel must—
	(a)	reset itself automatically after each operation of the ignition mechanism of the lighter; and
	(b)	not impair safe operation of the lighter when used in a normal and convenient way; and
	(c)	be effective for the functional life of the lighter; and
	(d)	not be easily overridden or deactivated.
49	Certification
A certificate of compliance, within the meaning of the American standard, must have been issued for the lighter in accordance with that standard.
Subdivision 2.13.4	Indexation
50	Indexed amount
	(1)	The indexed amount is the amount worked out in accordance with the formula:

	(2)	If, apart from this subsection, the indexed amount under this section would be an amount of dollars and cents, the amount must be rounded to the nearest 25 cents and, if the amount to be rounded is 12.5 cents, rounded up.
	(3)	In this section:
CPI number means the All Groups Consumer Price Index number (that is the weighted average of the 8 capital cities) published by the Australian Statistician.
latest CPI number means the CPI number for the most recent quarter.
March 2003 CPI number means the CPI number for the quarter beginning on 1 January 2003.
Division 2.14	Laser pointers
51	Definitions for div 2.14
In this division: 
AS/NZS 2211 means the Australian/New Zealand Standard entitled AS/NZS 2211.1:1997, Laser safety, Part 1: Equipment classification, requirements and user’s guide, as published jointly by Standards Australia and Standards New Zealand on 5 March 1997.
Note	This standard is available on the internet at the web site www.standards.com.au.
Class 1 laser product has the same meaning as in AS/NZS 2211, clause 3.15.
Class 2 laser product has the same meaning as in AS/NZS 2211, clause 3.16.
laser means any device that can be made to produce or amplify electromagnetic radiation in the wavelength range from 100 nanometres to 1mm primarily by the process of controlled stimulation emission.
laser pointer means a hand-held laser product that is battery-operated and produces a beam of electromagnetic radiation, but does not include any such product that is a therapeutic good within the meaning of the Therapeutic Goods Act 1989 (Cwlth) and listed or registered in the Australian Register of Therapeutic Goods maintained under that Act.
laser product means any product or assembly of components that constitutes, incorporates or is intended to incorporate a laser or laser system, and that is not intended for sale to another manufacturer for use as a component (or replacement for a component) of an electronic product.
laser system means a laser in combination with an appropriate laser energy source with or without additional incorporated components.
52	Safety standard—laser points
The consumer product safety standard prescribed for laser pointers is that they must be a Class 1 laser product or a Class 2 laser product.
Division 2.15	Monkey bikes
53	Definitions—div 2.15
In this division:
applicable vehicle standards means the standards under the Road Transport (Vehicle Registration) Regulation 2000 with which a vehicle must comply to be eligible to be registered without conditions.
monkey bike means a scaled down cruising or sports motorcycle that—
	(a)	is commonly known as a monkey bike, mini-bike or pocket bike; and
	(b)	is powered by an internal combustion engine; and
	(c)	does not comply with the applicable vehicle standards that would apply to the motorcycle if it were to be driven on a road or road related area (within the meaning of the Road Transport (Vehicle Registration) Act 1999).
54	Safety standard—monkey bikes
The consumer product safety standard for a monkey bike is that—
	(a)	the monkey bike must have a self-closing, hand-operated throttle that—
	(i)	returns in a clockwise direction to allow the bike’s motor to idle when a person riding the bike releases the person’s grip on the throttle; and
	(ii)	is mounted on the right handlebar of the bike; and
	(b)	the monkey bike must have a braking system that—
	(i)	is capable of acting on the front and rear wheels of the bike; and
	(ii)	automatically distributes the braking effort applied by a person riding the bike to the braking system’s control lever equally onto each brake lining without the need for an adjuster at the brake calliper; and
	(iii)	unless the bike is fitted with a drum-type braking system—incorporates a floating or sliding type brake calliper that compensates for any increased movement of its components arising from wear; and
	(c)	the monkey bike must have 2 foot pegs, each capable of holding a static load of—
	(i)	the maximum carrying capacity recommended by the manufacturer of the bike; or
	(ii)	if a maximum carrying capacity is not recommended by the manufacturer—70kg; and
	(d)	the steering head system for the monkey bike—
	(i)	must not exhibit free play; or
	(ii)	must move freely under its own weight from right lock to left lock when the front wheel of the bike is raised off the ground; and
	(e)	the monkey bike must have a functioning, thumb-operated device on the right or left handlebar that is—
	(i)	capable of stopping the motor; and 
	(ii)	clearly visible to a person riding the bike.
Division 2.16	Pedal bicycles
55	Definitions for div 2.16
In this division: 
AS/NZS 1927 means the Australian/New Zealand Standard entitled AS/NZS 1927:1998, Pedal bicycles—Safety requirements, as published jointly by Standards Australia and Standards New Zealand on 5 September 1998.
Note	This standard is available on the internet at the web site www.standards.com.au.
pedal bicycle means a 2-wheeled pedal vehicle that is designed to be solely human powered, and includes a fully assembled or partially assembled bicycle, but does not include any such vehicle—
	(a)	that has a wheelbase of less than 640mm; or
	(b)	that is designed, promoted and supplied primarily for use in cycling competitions; or
	(c)	that is a one of a kind bicycle that has been uniquely constructed to the specifications of an individual consumer; or
	(d)	that is designed to be hinged or folded, or to be taken apart (beyond removal of the front wheel), for ease of storage or portability; or
	(e)	that is a tandem bicycle; or
	(f)	that is a second-hand bicycle.
56	Safety standard—pedal bicycles
The consumer product safety standard for pedal bicycles is that they must comply with AS/NZS 1927.
57	Amendment of AS/NZS 1927
For this division, AS/NZS 1927 is taken to be amended as mentioned in table 57.
Table 57	Amendments of AS/NZS 1927 for div 2.16	
[7.1]	Clause 1.2
omit	
[7.2]	Clause 1.3
omit
New Zealand Traffic Section 1976	
[7.3]	Clause 1.5 (a)
omit
or New Zealand	
[7.4]	Clause 2.15.1
omit	
[7.5]	Clause 2.16, note
omit	
[7.6]	Clause 2.17.1
omit	

Division 2.17	Projectile toys
58	Definitions for div 2.17
In this division:
AS/NZS ISO 8124.1:2002 means the Australian/New Zealand Standard entitled AS/NZS ISO 8124.1:2002, Safety aspects related to mechanical and physical properties published jointly by Standards Australia and Standards New Zealand on 16 May 2002.
Note	This standard is available on the internet at the web site www.standards.com.au.
projectile toy means a toy to which AS/NZS ISO 8124.1:2002, clause 4.18 applies.
59	Safety standard—projectile toys
The consumer product safety standard for projectile toys is that they must comply with AS/NZS ISO 8124.1:2002, clauses 4.18, 5.2, 5.15, 5.24.5, 5.24.6.4, C.2.15 and E.32.
60	Exceptions to div 2.17
	(1)	This division does not apply to the toys mentioned in subsection (2) if—
	(a)	the toys do not have any protective tips or protective covers fitted to them; or
	(b)	any protective tips or protective covers fitted to the toys comply with the requirements of AS/NZS ISO 8124.1:2002, clause 4.18.2 (a) (1) and (2).
	(2)	The toys to which this division does not apply in the circumstances mentioned in subsection (1) (a) and (b) are the following:
	(a)	gliders that are thrown by hand or propelled by a rubber band;
	(b)	propeller-driven aeroplanes;
	(c)	propeller-driven helicopters;
	(d)	boomerangs;
	(e)	flying discs;
Example
a saucer-type throwing disc
Note	An example is part of the regulation, is not exhaustive and may extend, but does not limit, the meaning of the provision in which it appears (see Legislation Act, s 126 and s 132).
	(f)	balls (other than a ball intended for use with a discharge mechanism).
Division 2.18	Protective helmets for pedal cyclists
61	Definitions for div 2.18
In this division: 
AS/NZS 2063 means the Australian/New Zealand Standard entitled AS/NZS 2063:1996, Pedal cycle helmets published jointly by Standards Australia and Standards New Zealand on 5 May 1996, as amended by Amendment No 1 of 5 November 1996.
AS/NZ 2512.1 means the Australian/New Zealand Standard entitled AS 2512.1:1998, Methods of testing protective helmets, Method 1: Definitions and headforms, as published jointly by Standards Australia and Standards New Zealand on 5 September 1998.
Note	Standards AS/NZS 2063 and AS/NZS 2512.1 are available on the internet at web site www.standards.com.au.
protective helmet means a helmet designed to mitigate the adverse effects of a blow to the head.
Snell standard means the standard entitled 1995 Standard for Protective Headgear for Use in Bicycling including the Child Helmet Addendum to Standards for Protective Headgear published by the Snell Memorial Foundation of the United States of America. 
Note	This standard is available on the Internet as the document www.smf.org/standards/b95std.html.
62	Safety standard—protective helmets
The consumer product safety standard for protective helmets for pedal cyclists is that they must comply with—
	(a)	AS/NZS 2063; or
	(b)	the Snell standard.
63	Exceptions to div 2.18
	(1)	This division does not apply to the following helmets: 
	(a)	helmets that are of a size too small to be fitted to Headform A (as specified in AS/NZS 2512.1, table 2);
	(b)	helmets that are designed and constructed principally for use by cyclists engaged in competitive racing and that are marked in accordance with subsection (2);
	(c)	helmets that are designed and constructed principally for use as toys and that are marked in accordance with subsection (3), or that are not so marked but are unlikely to be mistaken for helmets providing significant protection against impact.
	(2)	A helmet mentioned in subsection (1) (b) is marked in accordance with this subsection if it has the words ‘WARNING: racing headgear only—inadequate impact protection for normal road use’ marked clearly and legibly in a conspicuous position—
	(a)	on the helmet or on a label attached to the helmet; and
	(b)	on a main outer display face of any packaging in which the helmet is supplied.
	(3)	A helmet mentioned in subsection (1) (c) is marked in accordance with this subsection if it has the words ‘WARNING: toy helmet only—do not use as safety headgear’ marked clearly and legibly in a conspicuous position—
	(a)	on the helmet or on a label attached to the helmet; and
	(b)	on a main outer display face of any packaging in which the helmet is supplied.
	(4)	The word ‘WARNING’ to be marked on a helmet under subsection (2) or (3) must be in capital letters at least 5mm high and the remaining words to be marked on a helmet under the subsection must be in letters at least 2.5mm high.
64	Amendment of AS/NZS 2063
For this division, AS/NZS 2063 is taken to be amended as mentioned in table 64.
Table 64	Amendments of AS/NZS 2063 for div 2.18	
[8.1]	Clause 1
omit	
[8.2]	New clause 5.7
insert
5.7	BMX Helmets	Helmets designed and constructed mainly for use by cyclists engaged in BMX competition racing need not comply with provisions regarding ventilation openings or type testing.	
[8.3]	Clause 8.1 (e
omit	
65	Amendment of Snell standard
A person is not required to comply with a provision of the Snell standard that requires the person to obtain third-party certification of a helmet.
Division 2.19	Sunglasses and fashion spectacles
66	Definitions for div 2.19
In this division:
sunglasses and fashion spectacles means sunglasses and fashion spectacles to which the TPA standard applies.
TPA standard means the consumer product safety standard prescribed for sunglasses and fashion spectacles under the Trade Practices Act 1974 (Cwlth), section 65E because of Consumer Protection Notice No 13 of 2003.
67	Safety standard—sunglasses and fashion spectacles
	(1)	The consumer product safety standard for sunglasses and fashion spectacles is the TPA standard as in force on 1 April 2005.
	(2)	The standard under subsection (1) is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act.
Division 2.20	Vehicle jacks
68	Definitions for div 2.20
In this division:
TPA standard means the consumer product safety standard prescribed for vehicle jacks under the Trade Practices Act 1974 (Cwlth), section 65E because of Consumer Protection Notice No 15 of 2003.
vehicle jacks means vehicle jacks to which the TPA standard applies.
69	Safety standard—vehicle jacks
	(1)	The consumer product safety standard for vehicle jacks is the TPA standard.
	(2)	The standard under subsection (1) is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act.

Part 3	Product information standard for care labelling of certain goods
    
70	Definitions for pt 3
In this part: 
AS/NZS 1957 means the Australian/New Zealand Standard entitled AS/NZS 1957:1998, Textiles—Care labelling, as published jointly by Standards Australia and Standards New Zealand on 5 January 1998.
Note	This standard is available on the internet at the web site www.standards.com.au.
71	Application of pt 3
	(1)	This part applies to any of the following goods that are made from textiles, plastics, plastic coated fabrics, suede, skins, hides, grain leathers or furs, and that are not excluded goods: 
	(a)	clothing;
	(b)	household textiles;
	(c)	apparel;
	(d)	furnishings or upholstered furniture;
	(e)	bedding, mattresses or bedbases;
	(f)	piece goods or yarns.
	(2)	In this section: 
excluded goods means—
	(a)	second-hand goods; and
	(b)	unsupported coats (including overcoats and jackets) made of PVC film, handkerchiefs, braces, garter suspenders, armbands, belts and headwear; and
	(c)	all footwear (including textile materials used in the manufacture of footwear but excluding all types of hosiery); and
	(d)	drapery consisting of floorcloths, dishcloths, dusters, cleaning cloths and pressing cloths; and
	(e)	haberdashery consisting of ornaments, artificial flowers, sewing and embroidery threads and all other small items of haberdashery used in the making of clothing and textile products if instructions are not needed to ensure that the clothing or textile product is not damaged during cleaning or maintenance; and
	(f)	furnishings consisting of oil baize, window blinds, shade blinds, sunblinds, awnings, floor coverings, light fittings, lampshades, tapestries, wall-hangings, ornaments, handicraft items, draught excluders, non-upholstered furniture and cushions; and
	(g)	cushion covers manufactured from remnants and labelled by the manufacturer with the disclaimer ‘Cushion cover manufactured from remnants, care treatment unknown’; and
	(h)	all jute products; and
	(i)	all medical and surgical goods (including bandages, dressings, sanitary pads and materials forming part of manufactured medical and surgical goods); and
	(j)	canvas beach and garden umbrella coverings; and
	(k)	cords, twines, lashings, garden hose, toys, umbrellas and parasols, shoelaces, woven labels, flex coverings, goods manufactured for sporting purposes (including sporting gloves but excluding all other apparel), articles intended for 1 use only, mops, basket hangers, shoe holders, remnants, industrial gloves, polypropylene-webbing furniture and all bags and cases (including handbags, purses, wallets, travel bags, school bags, sports bags, briefcases and washbags).
72	Product information standard
The consumer product information standard for goods to which this part applies is that the goods must comply with AS/NZS 1957.
73	Amendment of AS/NZS 1957
For this part, AS/NZS 1957 is taken to be amended as mentioned in table 73.
Table 73	Amendments of AS/NZS 1957 for pt 3	
[10.1]	Clauses 1.2 to 1.4, 2.1.3 and 2.2 (b)
omit	
[10.2]	Clause 2.2 (c)
substitute
	(c)	The wording of the label must be in English and be clearly legible.	
[10.3]	Clause 2.2, note 1
omit	
[10.4]	Clause 2.2, note 5
after
attached to that component.
insert
This includes individual pieces of household textile products sold as sets (for example, napkin and tablecloth sets).	
[10.5]	New clause 2.4
insert
2.4	ALTERNATIVE CARE INSTRUCTIONS	If in this standard there is a requirement for care instructions from categories in Tables 1, 2 or 3 to be provided on or with articles, words that have a similar meaning to the care instructions listed in Tables 1, 2 or 3 may be used.	
[10.6]	Clauses 3.4 and 3.5
omit
each of	
[10.7]	Clause 3.6
omit 1st mention of
each category
substitute
the categories	
[10.8]	Clause 3.6
omit
For upholstered furniture, bedding and other furnishings in Table 2, instructions shall be given from each category and a prohibitive instruction given if a cleaning method is unsuitable.	
74	Form of information for certain goods
	(1)	The care instructions for goods to which this part applies that are prescribed goods may be given—
	(a)	on a removable ticket or label attached to the goods; or
	(b)	on a pamphlet accompanying the goods; or
	(c)	as printed instructions on the wrapper or other material in which the goods are packaged.
	(2)	In this section: 
prescribed goods means—
	(a)	adult, children and baby clothing consisting of collars, neckwear, bow ties, gloves, mittens, all types of hosiery, incontinence garments, reversible garments, fur garments, bibs, washable nappies, squares of flannelette, terry towelling or muslin and baby pilchers; or
	(b)	drapery consisting of face washers, serviettes, doilies, table cloths, tray cloths, centres, runners, duchess sets, mosquito netting and covers made from mosquito netting, butter muslin and gauze, tea towels, place mats, pot holders, fingertips, appliance covers for teapots, toasters and the like and hot-water bottle covers; or
	(c)	haberdashery consisting of elastic, elastic threads, ribbons, zips, iron-on binding patches or trim, velcro-type fasteners, curtain-making kits and all other small items of haberdashery used in the making of clothing and textile products if instructions are needed to ensure that the clothing or textile product is not damaged during cleaning or maintenance; or
	(d)	shower curtains; or
	(e)	gardening gloves.
75	Care instructions for goods unable to be washed or dry-cleaned
If goods cannot be washed or dry-cleaned, the permanent label must—
	(a)	warn that the goods are unable to be washed or dry-cleaned; and
	(b)	adequately describe the care treatment for the goods.

Schedule 1	Test procedures for lighters
(see ss 38 and 40-43)
Part 1.1	General test procedures
	1	The lighter must be maintained at a temperature of 232C for at least 10 hours immediately before testing in accordance with part 1.2, part 1.3 and part 1.4. 
	2	The area in which tests are carried out must be maintained at a temperature of 232C during testing in accordance with part 1.2, part 1.4 and part 1.5.
	3	The lighter to be tested must be new, free of mechanical damage and must not (except if required by division 2.13) have been previously tested. 
Part 1.2	Flame height test procedures
	1	The test must be carried out inside a draught-free chamber constructed from suitable nonflammable material.
	2	The flame height must be measured to the nearest 10mm. 
	3	Adjustable lighters must be tested with the lighter adjusted to produce the maximum flame height and then with the lighter adjusted to produce the minimum flame height. 
	4	The lighter must produce a flame for a continuous 5 second period and the flame height must be decided by measuring from the tip of the flame to the top of the flameguard or to the base of the flame (for a lighter that does not have a flameguard) by means of a board positioned at least 25mm behind the lighter and marked with 10mm increments. 
Part 1.3	Inversion test procedures
	1	The lighter (adjustable lighters adjusted to produce a 50mm flame) must be operated to produce a flame, for a continuous 10 second period in a draught-free chamber, while being held at 45 below the horizontal.
Part 1.4	Drop test procedures
	1	The lighter must be allowed to fall 3 times onto a concrete surface from a point 1.5m above it, from the following positions: 
	(a)	first, an upright position; 
	(b)	second, an inverted position; 
	(c)	 third, a horizontal position; 
	2	The lighter must be inspected after every fall and any spontaneous ignition or damage must be recorded. 
Part 1.5	Temperature test procedures
	1	An oven that can withstand the explosion of a lighter when being tested and of maintaining a temperature of 542C must be used in the test. 
	2	The lighter must be placed in the oven for 4 hours during which time the oven temperature must be maintained at 542C. 
	3	The lighter, when removed from the oven and allowed to become cool, must be tested in accordance with part 1.3. 
Part 1.6	Pressure test procedure
	1	The test apparatus must consist of a device that can produce gauge pressure of 2MPa. 
	2	The lighter must be emptied of fuel. 
	3	The fuel reservoir of the lighter must be subjected to an internal pressure equal to twice the vapour pressure at 54C of the fuel normally used in the lighter.
	4	The pressure rise must not exceed a rate of 69kPa per second.

Dictionary
(see s 2)
Note 1	The Legislation Act contains definitions and other provisions relevant to this regulation.
Note 2	For example, the Legislation Act, dict, pt 1 defines the following terms:
·	Consumer Credit (Australian Capital Territory) Code
·	in relation to
·	Standards Australia.
adjustable lighter—see section 36.
American standard—see section 36.
AS 1067.1—see section 66.
AS 1499—see section 33.
AS 1512—see section 33.
AS 1754—1975—see section 27.
AS 1754—1991—see section 27.
AS 1900—see section 33.
AS/NZS 1249—see section 18.
AS/NZS 1927—see section 55.
AS/NZS 1957—see section 70.
AS/NZS 2063—see section 61.
AS/NZS 2172—see section 25.
AS/NZS 2211—see section 51.
AS/NZ 2512.1—see section 61.
AS/NZS ISO 8124.1:2002—see section 58.
balloon-blowing kit—see section 9.
beanbag—see section 14.
beanbag cover—see section 14.
beanbag filling —see section 14.
chaise—see section 27.
children’s flotation toys and swimming aids—see section 33.
children’s nightwear—see section 18.
child-resistant slide fastener—see section 14.
child restraint—see section 27.
children’s toys—see section 23.
Class 1 laser product—see section 51.
Class 2 laser product—see section 51.
cushion, for division 2.10 (Child restraints in motor vehicles)—see section 27.
customs value, for a device—see section 36.
disposable lighter—see section 37 (4).
ex-works agreement—see section 36.
household cot—see section 25.
indexed amount—see section 50.
ISO 6941—see section 18.
laser—see section 51.
laser pointer—see section 51.
laser product—see section 51.
laser system—see section 51.
lighter—see section 37.
non-adjustable lighter—see section 36.
novelty lighter—see section 37 (5).
package, for division 2.5 (Beanbags, beanbag covers and packages containing beanbag filling)—see section 14.
pedal bicycle—see section 55.
projectile toy—see section 58.
protective helmet—see section 61.
refillable lighter—see section 37 (6).
safe operation, for a lighter—see section 36.
slide fastener—see section 14.
Snell standard—see section 61.
spit or sputter, for a flame produced by a lighter—see section 36.
sunglasses and fashion spectacles—see section 66.
young child—see section 36.

Endnotes
1	About the endnotes
Amending and modifying laws are annotated in the legislation history and the amendment history.  Current modifications are not included in the republished law but are set out in the endnotes.
Not all editorial amendments made under the Legislation Act 2001, part 11.3 are annotated in the amendment history.  Full details of any amendments can be obtained from the Parliamentary Counsel’s Office.
Uncommenced amending laws and expiries are listed in the legislation history and the amendment history.  These details are underlined.  Uncommenced provisions and amendments are not included in the republished law but are set out in the last endnote.
If all the provisions of the law have been renumbered, a table of renumbered provisions gives details of previous and current numbering.  
The endnotes also include a table of earlier republications.
2	Abbreviation key

am = amended	ord = ordinance	
amdt = amendment	orig = original	
ch = chapter	par = paragraph/subparagraph	
def = definition	pres = present	
dict = dictionary	prev = previous	
disallowed = disallowed by the Legislative 	(prev...) = previously	
Assembly	pt = part	
div = division	r = rule/subrule	
exp = expires/expired	renum = renumbered	
Gaz = gazette	reloc = relocated	
hdg = heading	R[X] = Republication No	
IA = Interpretation Act 1967	RI = reissue	
ins = inserted/added	s = section/subsection	
LA = Legislation Act 2001	sch = schedule	
LR = legislation register	sdiv = subdivision	
LRA = Legislation (Republication) Act 1996	sub = substituted	
mod = modified/modification	SL = Subordinate Law	
o = order	underlining = whole or part not commenced	
om = omitted/repealed	or to be expired	
3	Legislation history
This regulation was originally the Fair Trading (Consumer Product Standards) Regulations 2002.  It was renamed under the Legislation Act 2001.
Fair Trading (Consumer Product Standards) Regulation 2002 SL2002‑39
notified LR 12 December 2002
s 1, s 2 commenced 12 December 2002 (LA s 75)
remainder commenced 13 December 2002 (s 2)
as amended by
Fair Trading (Consumer Product Standards) Amendment Regulations 2004 (No 1) SL2004-28
notified LR 22 July 2004
s 1, s 2 commenced 22 July 2004 (LA s 75 (1))
remainder commenced 23 July 2004 (s 2)
Fair Trading (Consumer Product Standards) Amendment Regulation 2005 (No 1) SL2005-23
notified LR 12 September 2005
s 1, s 2 commenced 12 September 2005 (LA s 75 (1))
remainder commenced 13 September 2005 (s 2)
Fair Trading (Consumer Product Standards) Amendment Regulation 2008 (No 1) SL2008-12
notified LR 2 April 2008
s 1, s 2 commenced 2 April 2008 (LA s 75 (1))
remainder commenced 3 April 2008 (s 2)
as repealed by
Fair Trading (Consumer Product Standards) Regulation 2009 SL2009‑19 s 15
notified LR 14 May 2009
s 1, s 2 commenced 14 May 2009 (LA s 75 (1))
s 15 commenced 15 May 2009 (s 2)
4	Amendment history
Name of regulation
s 1	am R3 LA
Dictionary
s 2	orig s 2
	om LA s 89 (4)
	pres s 2
	(prev s 3) renum as s 2 R2 LA (see SL2004-28 s 10)
Notes
s 3	orig s 3
	renum as s 2
	pres s 3
	(prev s 4) renum as s 3 R2 LA (see SL2004-28 s 10)
Compliance with specification
s 4	orig s 4
	renum as s 3
	pres s 4
	(prev s 5) renum as s 4 R2 LA (see SL2004-28 s 10)
Product safety standards
s 5	orig s 5
	renum as s 4
	pres s 5
	(prev s 6) renum as s 5 R2 LA (see SL2004-28 s 10)
Exceptions to consumer product standards generally
s 6	orig s 6
	renum as s 5
	pres s 6
	(prev s 7) renum as s 6 R2 LA (see SL2004-28 s 10)
Baby bath aids
div 2.1A hdg	renum as div 2.2 hdg
Baby bath aids
div 2.2 hdg	orig div 2.2 hdg
	renum as div 2.3 hdg
	pres div 2.2 hdg
	(prev div 2.1A hdg) ins SL2005-23 s 4
	renum as div 2.2 hdg R5 LA (see SL2005-23 s 5)
Definitions for div 2.2
s 6A	renum as s 7
Safety standard
s 6B	renum as s 8
Definitions for div 2.2
s 7	orig s 7
	renum as s 6
	prev s 7
	(prev s 8) renum as s 7 and then s 9
	pres s 7
	(prev s 6A) ins SL2005-23 s 4
	def baby bath aids ins SL2005-23 s 4
	def TPA standard ins SL2005-23 s 4
	renum as s 7 R6 LA (see SL2008-12 s 6)
Safety standard
s 8	orig s 8
	renum as s 7 and then s 9
	prev s 8
	(prev s 9) renum as s 8 and then s 10
	pres s 8
	(prev s 6B) ins SL2005-23 s 4
	renum as s 8 R6 LA (see SL2008-12 s 6)
Definitions—div 2.3A
s 8A	renum as s 11
Safety standard—warning and symbol for supplied basketball rings and backboards
s 8B	renum as s 12
Safety standard—permanent warning on basketball backboard
s 8C	renum as s 13
Balloon-blowing kits
div 2.3 hdg	orig div 2.3 hdg
	renum as div 2.4 hdg and then div 2.5 hdg
	pres div 2.3 hdg
	(prev div 2.2 hdg) renum as div 2.3 hdg R5 LA (see
SL2005-23 s 5)
Definition for div 2.3
s 9	orig s 9
	renum as s 8 and then s 10
	prev s 9
	(prev s 10) renum as s 9 and then s 14
	pres s 9
	(prev s 8) renum as s 7 R2 LA (see SL2004-28 s 10)
	renum as s 9 R6 LA (see SL2008-12 s 6)
Safety standard—balloon-blowing kits
s 10	orig s 10
	renum as s 9 and then s 14
	prev s 10
	(prev s 11) renum as s 10 and then s 15
	pres s 10
	(prev s 9) renum as s 8 R2 LA (see SL2004-28 s 10)
	renum as s 10 R6 LA (see SL2008-12 s 6)
Basketball rings and backboards
div 2.3A hdg	orig div 2.3A hdg
	renum as div 2.4 hdg and then div 2.5 hdg and then div 2.6 hdg
	prev div 2.3A hdg
	renum as div 2.4 hdg
Basketball rings and backboards
div 2.4 hdg	orig div 2.4 hdg
	renum as div 2.5 hdg and then div 2.6 hdg and then div 2.7 hdg
	prev div 2.4 hdg
	(prev div 2.3A hdg) renum as div 2.4 hdg and then div 2.5 hdg and then div 2.6 hdg
	prev div 2.4 hdg
	(prev div 2.3 hdg) renum as div 2.4 hdg and then div 2.5 hdg
	pres div 2.4 hdg
	(prev div 2.3A hdg) ins SL2008-12 s 4
	renum as div 2.4 hdg R6 LA (see SL2008-12 s 6)
Definitions—div 2.4
s 11	orig s 11
	renum as s 10 and then s 15
	prev s 11
	(prev s 11A) renum as s 11 and then s 16
	pres s 11
	(prev s 8A) ins SL2008-12 s 4
	renum as s 11 R6 LA (see SL2008-12 s 6)
	def basketball backboard ins SL2008-12 s 4
	def basketball ring ins SL2008-12 s 4
Definitions for div 2.3A
s 11A	renum as s 11 and then s 16
Safety standard—bunk beds
s 11B	renum as s 12 and then s 17
Safety standard—warning and symbol for supplied basketball rings and backboards
s 12	orig s 12
	renum as s 13 and then s 18
	prev s 12
	(prev s 11B) renum as s 12 and then s 17
	pres s 12
	(prev s 8B) ins SL2008-12 s 4
	renum as s 12 R6 LA (see SL2008-12 s 6)
Safety standard—permanent warning on basketball backboard
s 13	orig s 13
	renum as s 14 and then s 19
	prev s 13
	(prev s 12) renum as s 13 and then s 18
	pres s 13
	(prev s 8C) ins SL2008-12 s 4
	renum as s 13 R6 LA (see SL2008-12 s 6)
Beanbags, beanbag covers and packages containing beanbag filling
div 2.5 hdg	orig div 2.5 hdg
	renum as div 2.6 hdg and then div 2.7 hdg and then div 2.8 hdg
	prev div 2.5 hdg
	(prev div 2.4 hdg) renum as div 2.5 hdg and then div 2.6 hdg and then div 2.7 hdg
	prev div 2.5 hdg
	(prev div 2.3A hdg) renum as div 2.4 hdg and then div 2.5 hdg and then div 2.6 hdg
	pres div 2.5 hdg
	(prev div 2.3 hdg) renum as div 2.4 hdg R5 LA (see SL2005‑23 s 5)
	renum as div 2.5 hdg R6 LA (see SL2008‑12 s 6)
Definitions for div 2.5
s 14	orig s 14
	renum as s 15 and then s 20
	prev s 14
	(prev s 13) renum as s 14 and then s 19
	pres s 14
	(prev s 10) renum as s 9 R2 LA (see SL2004-28 s 10)
	renum as s 14 R6 LA (see SL2008-12 s 6)
Safety standard—beanbags etc
s 15	orig s 15
	renum as s 16 and then s 21
	prev s 15
	(prev s 14) renum as s 15 and then s 20
	pres s 15
	(prev s 11) renum as s 10 R2 LA (see SL2004-28 s 10)
	renum as s 15 R6 LA (see SL2008-12 s 6)
Bunk beds
div 2.6 hdg	orig div 2.6 hdg
	renum as div 2.7 hdg and then div 2.8 hdg and then div 2.9 hdg
	prev div 2.6 hdg
	(prev div 2.5 hdg) renum as div 2.6 hdg and then div 2.7 hdg and then div 2.8 hdg
	prev div 2.6 hdg
	(prev div 2.4 hdg) renum as div 2.5 hdg and then div 2.6 hdg and then div 2.7 hdg
	pres div 2.6 hdg
	(prev div 2.3A hdg) ins SL2004-28 s 4
	renum as div 2.4 hdg R2 LA (see SL2004-28 s 10)
	renum as 2.5 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.6 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.6
s 16	orig s 16
	renum as s 17 and then s 22
	prev s 16
	(prev s 15) renum as s 16 and then s 21
	pres s 16
	(prev s 11A) ins SL2004-28 s 4
	renum as s 11 R2 LA (see SL2004-28 s 10)
	renum as s 16 R6 LA (see SL2008-12 s 6)
	def bunk beds ins SL2004-28 s 4
	def TPA standard ins SL2004-28 s 4
Safety standard—bunk beds
s 17	orig s 17
	renum as s 18 and then s 23
	prev s 17
	(prev s 16) renum as s 17 and then s 22
	pres s 17
	(prev s 11B) ins SL2004-28 s 4
	renum as s 12 R2 LA (see SL2004-28 s 10)
	renum as s 17 R6 LA (see SL2008-12 s 6)
Children’s nightwear and paper patterns for children’s nightwear
div 2.7 hdg	orig div 2.7 hdg
	renum as div 2.8 hdg and then div 2.9 hdg and then div 2.10 hdg
	prev div 2.7 hdg
	(prev div 2.6 hdg) renum as div 2.7 hdg and then div 2.8 hdg and then div 2.9 hdg
	prev div 2.7 hdg
	(prev div 2.5 hdg) renum as div 2.6 hdg and then div 2.7 hdg and then div 2.8 hdg
	pres div 2.7 hdg
	(prev div 2.4 hdg) renum as div 2.5 hdg R2 LA (see 
SL2004-28 s 10)
	renum as div 2.6 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.7 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.7
s 18	orig s 18
	renum as s 19 and then s 24
	prev s 18
	(prev s 17) renum as s 18 and then s 23
	pres s 18
	(prev s 12) renum as s 13 R2 LA (see SL2004-28 s 10)
	renum as s 18 R6 LA (see SL2008-12 s 6)
Safety standard—children’s nightwear
s 19	orig s 19
	om SL2004-28 s 5
	prev s 19
	(prev s 18) renum as s 19 and then s 24
	pres s 19
	(prev s 13) renum as s 14 R2 LA (see SL2004-28 s 10)
	renum as s 19 R6 LA (see SL2008-12 s 6)
Safety standard—paper patterns for children’s nightwear
s 20	orig s 20
	renum as s 25
	pres s 20
	(prev s 14) renum as s 15 R2 LA (see SL2004-28 s 10)
	renum as s 20 R6 LA (see SL2008-12 s 6)
Amendment of AS/NZS 1249
s 21	orig s 21
	renum as s 26
	pres s 21
	(prev s 15) renum as s 16 R2 LA (see SL2004-28 s 10)
	tables renum R2 LA
	renum as s 21 R6 LA (see SL2008-12 s 6)
Amendment of ISO 6941
s 22	orig s 22
	renum as s 27
	pres s 22
	(prev s 16) renum as s 17 R2 LA (see SL2004-28 s 10)
	renum as s 22 R6 LA (see SL2008-12 s 6)
Corded internal window coverings
div 2.7A hdg	renum as div 2.9 hdg and then div 2.10 hdg
Children’s toys
div 2.8 hdg	orig div 2.8 hdg
	renum as div 2.10 hdg and then div 2.11 hdg and then div 2.12 hdg
	prev div 2.8 hdg
	(prev div 2.7 hdg) renum as div 2.8 hdg and then div 2.9 hdg and then div 2.10 hdg
	prev div 2.8 hdg
	(prev div 2.6 hdg) renum as div 2.7 hdg and then div 2.8 hdg and then div 2.9 hdg
	pres div 2.8 hdg
	(prev div 2.5 hdg) sub SL2004-28 s 5
	renum as div 2.6 hdg R2 LA (see SL2004-28 s 10)
	renum as div 2.7 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.8 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.8
s 23	orig s 23
	renum as s 28
	pres s 23
	(prev s 17) sub SL2004-28 s 5
	renum as s 18 R2 LA (see SL2004-28 s 10)
	renum as s 23 R6 LA (see SL2008-12 s 6)
	def AS 1647.2BI om SL2004-28 s 5
	def children’s toys sub SL2004-28 s 5
	def TPA standard ins SL2004-28 s 5
Safety standard—children’s toys
s 24	orig s 24
	renum as s 29
	pres s 24
	(prev s 18) sub SL2004-28 s 5
	renum as s 19 R2 LA (see SL2004-28 s 10)
	(2), (4) exp 1 July 2005 (s 19 (4))
	ss renum R4 LA
	renum as s 24 R6 LA (see SL2008-12 s 6)
Children’s household cots
div 2.9 hdg	orig div 2.9 hdg
	renum as div 2.11 hdg and then div 2.12 hdg and then div 2.13 hdg
	prev div 2.9 hdg
	(prev div 2.7A hdg) renum as div 2.9 hdg and then div 2.10 hdg and then div 2.11 hdg
	prev div 2.9 hdg
	(prev div 2.7 hdg) renum as div 2.8 hdg and then div 2.9 hdg and then div 2.10 hdg
	pres div 2.9 hdg
	(prev div 2.6 hdg) renum as div 2.7 hdg R2 LA (see 
SL2004-28 s 10)
	renum as div 2.8 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.9 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.9
s 25	orig s 25
	renum as s 30
	pres s 25
	(prev s 20) renum as s 25 R6 LA (see SL 2008-12 s 6)
Definitions for div 2.7A
s 25A	renum as s 26 and then s 31
Safety standard
s 25B	renum as s 27 and then s 32
Safety standard—household cots
s 26	orig s 26
	renum as s 28 and then s 33
	prev s 26
	(prev s 25A) renum as s 26 and then s 31
	pres s 26
	(prev s 21) renum as s 26 R6 LA (see SL2008-12 s 6)
Preliminary
sdiv 2.9.1 hdg	renum as sdiv 2.11.1 hdg and then sdiv 2.12.1 hdg and then sdiv 2.13.1 hdg
Flame testing, structural safety and labelling
sdiv 2.9.2 hdg	renum as sdiv 2.11.2 hdg and then sdiv 2.12.2 hdg and then sdiv 2.13.2 hdg
Child resistance
sdiv 2.9.3 hdg	renum as sdiv 2.11.3 hdg and then sdiv 2.12.3 hdg and then sdiv 2.13.3 hdg
Indexation
sdiv 2.9.4 hdg	renum as sdiv 2.11.4 hdg and then sdiv 2.12.4 hdg and then sdiv 2.13.4 hdg
Child restraints in motor vehicles
div 2.10 hdg	orig div 2.10 hdg
	renum as div 2.12 hdg and then div 2.13 hdg and then div 2.14 hdg
	prev div 2.10 hdg
	(prev div 2.8 hdg) renum as div 2.10 hdg and then div 2.11 hdg and then div 2.12 hdg
	prev div 2.10 hdg
	(prev div 2.7A hdg) renum as div 2.9 hdg and then div 2.10 hdg and then div 2.11 hdg
	pres div 2.10 hdg
	(prev div 2.7 hdg) renum as div 2.8 hdg R2 LA (see 
SL2004-28 s 10)
	renum as div 2.9 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.10 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.10
s 27	orig s 27
	renum as s 29 and then s 34
	prev s 27
	(prev s 25B) renum as s 27 and then s 32
	pres s 27
	(prev s 22) renum as s 27 R6 LA (see SL2008-12 s 6)
Safety standard—child restraints
s 28	orig s 28
	renum as s 30 and then s 35
	prev s 28
	(prev s 26) renum as s 28 and then s 33
	pres s 28
	(prev s 23) renum as s 28 R6 LA (see SL2008-12 s 6)
Amendment of AS 1754—1991
s 29	orig s 29
	renum as s 31 and then s 36
	prev s 29
	(prev s 27) renum as s 29 and then s 34
	pres s 29
	(prev s 24) table renum R2 LA
	renum as s 29 R6 LA (see SL2008-12 s 6)
Supply of components for child restraints complying with AS 1754—1975
s 30	orig s 30
	renum as s 32 and then s 37
	prev s 30
	(prev s 28) renum as s 30 and then s 35
	pres s 30
	(prev s 25) renum as s 30 R6 LA (see SL2008-12 s 6)
Corded internal window coverings
div 2.11 hdg	orig div 2.11 hdg
	renum as div 2.13 hdg and then div 2.14 hdg and then div 2.16 hdg
	prev div 2.11 hdg
	(prev div 2.9 hdg) renum as div 2.11 hdg and then div 2.12 hdg and then div 2.13 hdg
	prev div 2.11 hdg
	(prev div 2.8 hdg) renum as div 2.10 hdg and then div 2.11 hdg and then div 2.12 hdg
	pres div 2.11 hdg
	(prev div 2.7A hdg) ins SL2004-28 s 6
	renum as div 2.9 hdg  R2 LA (see SL2004-28 s 10)
	renum as div 2.10 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.11 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.11
s 31	orig s 31
	renum as s 33 and then s 38
	prev s 31
	(prev s 29) renum as s 31 and then s 36
	pres s 31
	(prev s 25A) ins SL2004-28 s 6
	renum as s 26 R2 LA (see SL2004-28 s 10)
	renum as s 31 R6 LA (see SL2008-12 s 6)
	def corded internal window coverings ins SL2004-28 s 6
	def NSW standard ins SL2004-28 s 6
Safety standard—corded internal window coverings
s 32	orig s 32
	renum as s 34 and then s 39
	prev s 32
	(prev s 30) renum as s 32 and then s 37
	pres s 32
	(prev s 25B) ins SL2004-28 s 6
	renum as s 27 R2 LA (see SL2004-28 s 10)
	renum as s 32 R6 LA (see SL2008-12 s 6)
Preliminary
sdiv 2.11.1 hdg	(prev sdiv 2.9.1 hdg) renum as sdiv 2.11.1 hdg and then sdiv 2.12.1 hdg and then sdiv 2.13.1 hdg
Flame testing, structural safety and labelling
sdiv 2.11.2 hdg	(prev sdiv 2.9.2 hdg) renum as sdiv 2.11.2 hdg and then sdiv 2.12.2 hdg and then sdiv 2.13.2 hdg
Child resistance
sdiv 2.11.3 hdg	(prev sdiv 2.9.3 hdg) renum as sdiv 2.11.3 hdg and then sdiv 2.12.3 hdg and then sdiv 2.13.3 hdg
Indexation
sdiv 2.11.4 hdg	(prev sdiv 2.9.4 hdg) renum as sdiv 2.11.4 hdg and then sdiv 2.12.4 hdg and then sdiv 2.13.4 hdg
Flotation toys and swimming aids
div 2.12 hdg	orig div 2.12 hdg
	renum as div 2.14 hdg and then div 2.15 hdg and then div 2.17 hdg
	prev div 2.12 hdg
	(prev div 2.10 hdg) renum as div 2.12 and then div 2.13 hdg and then div 2.14 hdg
	prev div 2.12 hdg
	(prev div 2.9 hdg) renum as div 2.11 hdg and then div 2.12 hdg and then div 2.13 hdg
	pres div 2.12 hdg
	(prev div 2.8 hdg) renum as div 2.10 hdg R2 LA (see 
SL2004-28 s 10)
	renum as div 2.11 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.12 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.12
s 33	orig s 33
	renum as s 35 and then s 40
	prev s 33
	(prev s 31) renum as s 33 and then s 38
	pres s 33
	(prev s 26) renum as s 28 R2 LA (see SL2004-28 s 10)
	renum as s 33 R6 LA (see SL2008-12 s 6)
Safety standard—children’s flotation toys etc
s 34	orig s 34
	renum as s 36 and then s 41
	prev s 34
	(prev s 32) renum as s 34 and then s 39
	pres s 34
	(prev s 27) renum as s 29 R2 LA (see SL2004-28 s 10)
	renum as s 34 R6 LA (see SL2008-12 s 6)
Amendment of AS 1900
s 35	orig s 35
	renum as s 37 and then s 42
	prev s 35
	(prev s 33) renum as s 35 and then s 40
	pres s 35
	(prev s 28) renum as s 30 R2 LA (see SL2004-28 s 10)
	table renum R2 LA
	renum as s 35 R6 LA (see SL2008-12 s 6)
Preliminary
sdiv 2.12.1 hdg	(prev sdiv 2.9.1 hdg) renum as sdiv 2.11.1 hdg and then sdiv 2.12.1 hdg and then sdiv 2.13.1 hdg
Flame testing, structural safety and labelling
sdiv 2.12.2 hdg	(prev sdiv 2.9.2 hdg) renum as sdiv 2.11.2 hdg and then sdiv 2.12.2 hdg and then sdiv 2.13.2 hdg
Child resistance
sdiv 2.12.3 hdg	(prev sdiv 2.9.3 hdg) renum as sdiv 2.11.3 hdg and then sdiv 2.12.3 hdg and then sdiv 2.13.3 hdg
Indexation
sdiv 2.12.4 hdg	(prev sdiv 2.9.4 hdg) renum as sdiv 2.11.4 hdg and then sdiv 2.12.4 hdg and then sdiv 2.13.4 hdg
Disposable cigarette lighters
div 2.13 hdg	orig div 2.13 hdg
	renum as div 2.15 hdg and then div 2.16 hdg and then div 2.18 hdg
	prev div 2.13 hdg
	(prev div 2.11 hdg) renum as div 2.13 hdg and then div 2.14 hdg and then div 2.16 hdg
	prev div 2.13 hdg
	(prev div 2.10 hdg) renum as div 2.12 hdg and then div 2.13 hdg and then div 2.14 hdg
	pres div 2.13 hdg
	(prev div 2.9 hdg) renum as div 2.11 hdg R2 LA (see 
SL2004-28 s 10)
	renum as div 2.12 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.13 hdg R6 LA (see SL2008-12 s 6)
Preliminary
sdiv 2.13.1 hdg	(prev sdiv 2.9.1 hdg) renum as sdiv 2.11.1 hdg R2 LA (see SL2004-28 s 10)
	renum as sdiv 2.12.1 hdg R5 LA (see SL2005-23 s 5)
	renum as sdiv 2.13.1 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.13
s 36	orig s 36
	renum as s 38 and then s 43
	prev s 36
	(prev s 34) renum as s 36 and then s 41
	pres s 36
	(prev s 29) renum as s 31 R2 LA (see SL2004-28 s 10)
	renum as s 36 R6 LA (see SL2008-12 s 6)
Meaning of lighter and types of lighters
s 37	orig s 37
	renum as s 39 and then s 44
	prev s 37
	(prev s 35) renum as s 37 and then s 42
	pres s 37
	(prev s 30) am SL2004-28 s 7
	renum as s 32 R2 LA (see SL2004-28 s 10)
	renum as s 37 R6 LA (see SL2008-12 s 6)
Safety standard—lighters
s 38	orig s 38
	renum as s 40 and then s 45
	prev s 38
	(prev s 36) renum as s 38 and then s 43
	pres s 38
	(prev s 31) renum as s 33 R2 LA (see SL2004-28 s 10)
	renum as s 38 R6 LA (see SL2008-12 s 6)
Flame testing, structural safety and labelling
sdiv 2.13.2 hdg	(prev sdiv 2.9.2 hdg) renum as sdiv 2.11.2 hdg R2 LA (see SL2004-28 s 10)
	renum as sdiv 2.12.2 hdg R5 LA (see SL2005-23 s 5)
	renum as sdiv 2.13.2 hdg R6 LA (see SL2008-12 s 6)
Application of subdiv 2.13.2
s 39	orig s 39
	renum as s 41 and then s 46
	prev s 39
	(prev s 37) renum as s 39 and then s 44
	pres s 39
	(prev s 32) renum as s 34 R2 LA (see SL2004-28 s 10)
	renum as s 39 R6 LA (see SL2008-12 s 6)
Testing procedures
s 40	orig s 40
	renum as s 42 and then s 47
	prev s 40
	(prev s 38) renum as s 40 and then s 45
	pres s 40
	(prev s 33) renum as s 35 R2 LA (see SL2004-28 s 10)
	renum as s 40 R6 LA (see SL2008-12 s 6)
Ignition and adjustment of flame
s 41	orig s 41
	renum as s 43 and then s 48
	prev s 41
	(prev s 39) renum as s 41 and then s 46
	pres s 41
	(prev s 34) renum as s 36 R2 LA (see SL2004-28 s 10)
	renum as s 41 R6 LA (see SL2008-12 s 6)
Abnormal burning
s 42	orig s 42
	renum as s 44 and then s 49
	prev s 42
	(prev s 40) renum as s 42 and then s 47
	pres s 42
	(prev s 35) renum as s 37 R2 LA (see SL2004-28 s 10)
	renum as s 42 R6 LA (see SL2008-12 s 6)
Flame height
s 43	orig s 43
	renum as s 45 and then s 50
	prev s 43
	(prev s 41) renum as s 43 and then s 48
	pres s 43
	(prev s 36) renum as s 38 R2 LA (see SL2004-28 s 10)
	renum as s 43 R6 LA (see SL2008-12 s 6)
Flame extinction
s 44	orig s 44
	renum as s 46 and then s 51
	prev s 44
	(prev s 42) renum as s 44 and then s 49
	pres s 44
	(prev s 37) renum as s 39 R2 LA (see SL2004-28 s 10)
	renum as s 44 R6 LA (see SL2008-12 s 6)
Structural safety
s 45	orig s 45
	renum as s 47 and then s 52
	prev s 45
	(prev s 43) renum as s 45 and then s 50
	pres s 45
	(prev s 38) renum as s 40 R2 LA (see SL2004-28 s 10)
	renum as s 45 R6 LA (see SL2008-12 s 6)
Labelling
s 46	orig s 46
	renum as s 48 and then s 55
	prev s 46
	(prev s 44) renum as s 46 and then s 51
	pres s 46
	(prev s 39) renum as s 41 R2 LA (see SL2004-28 s 10)
	renum as s 46 R6 LA (see SL2008-12 s 6)
Child resistance
sdiv 2.13.3 hdg	(prev sdiv 2.9.3 hdg) renum as sdiv 2.11.3 hdg R2 LA (see SL2004-28 s 10)
	renum as sdiv 2.12.3 hdg R5 LA (see SL2005-23 s 5)
	renum as sdiv 2.13.3 hdg R6 LA (see SL2008-12 s 6)
Application of subdiv 2.13.3
s 47	orig s 47
	renum as s 49 and then s 56
	prev s 47
	(prev s 45) renum as s 47 and then s 52
	pres s 47
	(prev s 40) renum as s 42 R2 LA (see SL2004-28 s 10)
	renum as s 47 R6 LA (see SL2008-12 s 6)
Definitions—div 2.13A
s 47A	renum as s 53
Safety standard—monkey bikes
s 47B	renum as s 54
Child resistance
s 48	orig s 48
	renum as s 50 and then s 57
	prev s 48
	(prev s 46) renum as s 48 and then s 55
	pres s 48
	(prev s 41) renum as s 43 R2 LA (see SL2004-28 s 10)
	renum as s 48 R6 LA (see SL2008-12 s 6)
Certification
s 49	orig s 49
	renum as s 51 and then s 58
	prev s 49
	(prev s 47) renum as s 49 and then s 56
	pres s 49
	(prev s 42) renum as s 44 R2 LA (see SL2004-28 s 10)
	renum as s 49 R6 LA (see SL2008-12 s 6)
Indexation
sdiv 2.13.4 hdg	(prev sdiv 2.9.4 hdg) renum as sdiv 2.11.4 hdg R2 LA (see SL2004-28 s 10)
	renum as sdiv 2.12.4 hdg R5 LA (see SL2005-23 s 5)
	renum as sdiv 2.13.4 hdg R6 LA (see SL2008-12 s 6)
Indexed amount
s 50	orig s 50
	renum as s 52 and then s 59
	prev s 50
	(prev s 48) renum as s 50 and then s 57
	pres s 50
	(prev s 43) sub SL2004-28 s 8
	renum as s 45 R2 LA (see SL2004-28 s 10)
	renum as s 50 R6 LA (see SL2008-12 s 6)
Monkey bikes
div 2.13A hdg	renum as div 2.15 hdg
Laser pointers
div 2.14 hdg	orig div 2.14 hdg
	renum as div 2.16 hdg and then div 2.17 hdg and then div 2.19 hdg
	prev div 2.14 hdg
	(prev div 2.12 hdg) renum as div 2.14 hdg and then div 2.15 hdg and then div 2.17 hdg
	prev div 2.14 hdg
	(prev div 2.11 hdg) renum as div 2.13 hdg and then div 2.14 hdg and then div 2.16 hdg
	pres div 2.14 hdg
	(prev div 2.10 hdg) renum as div 2.12 hdg R2 LA (see SL2004-28 s 10)
	renum as div 2.13 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.14 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.14
s 51	orig s 51
	renum as s 53 and then s 60
	prev s 51
	(prev s 49) renum as s 51 and then s 58
	pres s 51
	(prev s 44) renum as s 46 R2 LA (see SL2004-28 s 10)
	renum as s 51 R6 LA (see SL2008-12 s 6)
Safety standard—laser points
s 52	orig s 52
	renum as s 54 and then s 61
	prev s 52
	(prev s 50) renum as s 52 and then s 59
	pres s 52
	(prev s 45) renum as s 47 R2 LA (see SL2004-28 s 10)
	renum as s 52 R6 LA (see SL2008-12 s 6)
Monkey bikes
div 2.15 hdg	orig div 2.15 hdg
	renum as div 2.17 hdg and then div 2.18 hdg and then div 2.20 hdg
	prev div 2.15 hdg
	(prev div 2.13 hdg) renum as div 2.15 hdg and then div 2.16 hdg and then div 2.18 hdg
	prev div 2.15 hdg
	(prev div 2.12 hdg) renum as div 2.14 hdg and then div 2.15 hdg and then div 2.17 hdg
	pres div 2.15 hdg
	(prev div 2.13A hdg) ins SL2008-12 s 6
	renum as div 2.15 hdg R6 LA (see SL2008-12 s 6)
Definitions—div 2.15
s 53	orig s 53
	renum as s 55 and then s 62
	prev s 53
	(prev s 51) renum as s 53 and then s 60
	pres s 53
	(prev s 47A) ins SL2008-12 s 5
	renum as s 53 R6 LA (see SL2008-12 s 6)
	def applicable vehicle standards ins SL2008-12 s 5
	def monkey bike ins SL2008-12 s 5
Safety standard—monkey bikes
s 54	orig s 54
	renum as s 56 and then s 63
	prev s 54
	(prev s 52) renum as s 54 and then s 61
	pres s 54
	(prev s 47B) ins SL2008-12 s 5
	renum as s 54 R6 LA (see SL2008-12 s 6)
Pedal bicycles
div 2.16 hdg	orig div 2.16 hdg
	(prev div 2.14 hdg) renum as div 2.16 hdg and then div 2.17 hdg and then div 2.19 hdg
	prev div 2.16 hdg
	(prev div 2.13 hdg) renum as div 2.15 hdg and then div 2.16 hdg and then div 2.18 hdg
	pres div 2.16 hdg
	(prev div 2.11 hdg) renum as div 2.13 hdg R2 LA (see SL2004-28 s 10)
	renum as div 2.14 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.16 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.16
s 55	orig s 55
	renum as s 57 and then s 64
	prev s 55
	(prev s 53) renum as s 55 and then s 62
	pres s 55
	(prev s 46) renum as s 48 R2 LA (see SL2004-28 s 10)
	renum as s 55 R6 LA (see SL2008-12 s 6)
Safety standard—pedal bicycles
s 56	orig s 56
	renum as s 58 and then s 65
	prev s 56
	(prev s 54) renum as s 56 and then s 63
	pres s 56
	(prev s 47) renum as s 49 R2 LA (see SL2004-28 s 10)
	renum as s 56 R6 LA (see SL2008-12 s 6)
Amendment of AS/NZS 1927
s 57	orig s 57
	renum as s 59 and then s 66
	pres s 57
	(prev s 55) renum as s 57 and then s 64
	pres s 57
	(prev s 48) renum as s 50 R2 LA (see SL2004-28 s 10)
	table renum R2 LA
	renum as s 57 R6 LA (see SL2008-12 s 6)
Projectile toys
div 2.17 hdg	orig div 2.17 hdg
	(prev div 2.15) renum as div 2.17 hdg and then div 2.18 hdg and then div 2.20 hdg
	prev div 2.17 hdg
	(prev div 2.14 hdg) renum as div 2.16 hdg and then div 2.17 hdg and then div 2.19 hdg
	pres div 2.17 hdg
	(prev div 2.12 hdg) renum as div 2.14 hdg R2 LA (see SL2004-28 s 10)
	renum as div 2.15 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.17 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.17
s 58	orig s 58
	renum as s 60 and then s 67
	prev s 58
	(prev s 56) renum as s 58 and then s 65
	pres s 58
	(prev s 49) renum as s 51 R2 LA (see SL2004-28 s 10)
	renum as s 58 R6 LA (see SL2008-12 s 6)
Safety standard—projectile toys
s 59	orig s 59
	renum as s 61 and then s 68
	prev s 59
	(prev s 57) renum as s 59 and then s 66
	pres s 59
	(prev s 50) renum as s 52 R2 LA (see SL2004-28 s 10)
	renum as s 59 R6 LA (see SL2008-12 s 6)
Safety standard—vehicle jacks
s 59A	renum as s 62 and then s 69
Exceptions to div 2.17
s 60	orig s 60
	renum as s 63 and then s 70
	prev s 60
	(prev s 58) renum as s 60 and then s 67
	pres s 60
	(prev s 51) renum as s 53 R2 LA (see SL2004-28 s 10)
	renum as s 60 R6 LA (see SL2008-12 s 6)
Protective helmets for pedal cyclists
div 2.18 hdg	orig div 2.18 hdg
	(prev div 2.15 hdg) renum as div 2.17 hdg and then div 2.18 hdg and then div 2.20 hdg
	pres div 2.18 hdg
	(prev div 2.13 hdg) renum as div 2.15 hdg R2 LA (see SL2004-28 s 10)
	renum as div 2.16 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.18 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.18
s 61	orig s 61
	renum as s 64 and then s 71
	prev s 61
	(prev s 59) renum as s 61 and then s 68
	pres s 61
	(prev s 52) renum as s 54 R2 LA (see SL2004-28 s 10)
	renum as s 61 R6 LA (see SL2008-12 s 6)
Safety standard—protective helmets
s 62	orig s 62
	renum as s 65 and then s 72
	prev s 62
	(prev s 59A) renum as s 62 and then s 69
	pres s 62
	(prev s 53) renum as s 55 R2 LA (see SL2004-28 s 10)
	renum as s 62 R6 LA (see SL2008-12 s 6)
Exceptions to div 2.18
s 63	orig s 63
	renum as s 66 and then s 73
	prev s 63
	(prev s 60) renum as s 63 and then s 70
	pres s 63
	(prev s 54) renum as s 56 R2 LA (see SL2004-28 s 10)
	renum as s 63 R6 LA (see SL2008-12 s 6)
Amendment of AS/NZS 2063
s 64	orig s 64
	renum as s 67 and then s 74
	prev s 64
	(prev s 61) renum as s 64 and then s 71
	pres s 64
	(prev s 55) renum as s 57 R2 LA (see SL2004-28 s 10)
	table renum R2 LA
	renum as s 64 R6 LA (see SL2008-12 s 6)
Amendment of Snell standard
s 65	orig s 65
	renum as s 68 and then s 75
	prev s 65
	(prev s 62) renum as s 65 and then s 72
	pres s 65
	(prev s 56) renum as s 58 R2 LA (see SL2004-28 s 10)
	renum as s 65 R6 LA (see SL2008-12 s 6)
Sunglasses and fashion spectacles
div 2.19 hdg	(prev div 2.14 hdg) sub SL2004-28 s 9
	renum as div 2.16 hdg R2 LA (see SL2004-28 s 10)
	renum as div 2.17 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.19 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.19
s 66	orig s 66
	(prev s 63) renum as s 66 and then as s 73
	pres s 66
	(prev s 57) sub SL2004-28 s 9
	renum as s 59 R2 LA (see SL2004-28 s 10)
	renum as s 66 R6 LA (see SL2008-12 s 6)
	def AS 1067.1 om SL2004-28 s 9
	def sunglasses and fashion spectacles sub SL2004-28 s 9
	def TPA standard ins SL2004-28 s 9
Safety standard—sunglasses and fashion spectacles
s 67	orig s 67
	(prev s 64) renum as s 67 and then s 74
	pres s 67
	(prev s 58) sub SL2004-28 s 9
	renum as s 60 R2 LA (see SL2004-28 s 10)
	(2), (4) exp 1 July 2005 (s 60 (4))
	ss renum R4 LA
	renum as s 67 R6 LA (see SL2008-12 s 6)
Vehicle jacks
div 2.20 hdg	(prev div 2.15 hdg) ins SL2004-28 s 9
	renum as div 2.17 hdg R2 LA (see SL2004-28 s 10)
	renum as div 2.18 hdg R5 LA (see SL2005-23 s 5)
	renum as div 2.20 hdg R6 LA (see SL2008-12 s 6)
Definitions for div 2.20
s 68	orig s 68
	(prev s 65) renum as s 68 and then s 75
	pres s 68
	(prev s 59) sub SL2004-28 s 9
	renum as s 61 R2 LA (see SL2004-28 s 10)
	renum as s 68 R6 LA (see SL2008-12 s 6)
	def TPA standard ins SL2004-28 s 9
	def vehicle jacks ins SL2004-28 s 9
Safety standard—vehicle jacks
s 69	(prev s 59A) ins SL2004-28 s 9
	renum as s 62 R2 LA (see SL2004-28 s 10)
	renum as s 69 R6 LA (see SL2008-12 s 6)
Definitions for pt 3
s 70	(prev s 60) renum as s 63 R2 LA (see SL2004-28 s 10)
	renum as s 70 R6 LA
Application of pt 3
s 71	(prev s 61) renum as s 64 R2 LA (see SL2004-28 s 10)
	renum as s 71 R6 LA
Product information standard
s 72	(prev s 62) renum as s 65 R2 LA (see SL2004-28 s 10)
	renum as s 72 R6 LA
Amendment of AS/NZS 1957
s 73	(prev s 63) renum as s 66 R2 LA (see SL2004-28 s 10)
	table renum R2 LA
	renum as s 73 R6 LA
Form of information for certain goods
s 74	(prev s 64) renum as s 67 R2 LA (see SL2004-28 s 10)
	renum as s 74 R6 LA
Care instructions for goods unable to be washed or dry-cleaned
s 75	(prev s 65) renum as s 68 R2 LA (see SL2004-28 s 10)
	renum as s 75 R6 LA
Dictionary
dict	def AS 1182 om R3 LA
	def AS 1647.2 om R3 LA
	def CPI number om R3 LA
	def earlier CPI number om R3 LA
	def July quarter om R3 LA
	def latest CPI number om R3 LA

5	Earlier republications
Some earlier republications were not numbered. The number in column 1 refers to the publication order.  
Since 12 September 2001 every authorised republication has been published in electronic pdf format on the ACT legislation register.  A selection of authorised republications have also been published in printed format. These republications are marked with an asterisk (*) in column 1.  Electronic and printed versions of an authorised republication are identical. 

Republication No and date	Effective	Last amendment made by	Republication for	
R1
13 Dec 2002	13 Dec 2002–
22 July 2004	not amended	new regulation 	
R2
23 July 2004	23 July 2004–
3 Nov 2004	SL2004-28	amendments by SL2004-28 and general renumbering	
R3
4 Nov 2004	4 Nov 2004–
1 July 2005	SL2004-28	editorial amendments under Legislation Act	
R4
2 July 2005	2 July 2005–
12 Sept 2005	SL2004-28	commenced expiry	
R5
13 Sept 2005	13 Sept 2005–
2 Apr 2008	SL2005-23	amendments by SL2005-23 and general renumbering	
R6
3 Apr 2008	3 Apr 2008–
14 May 2009	SL2008-12	amendments by SL2008-12 and general renumbering	

6	Renumbered provisions
This subordinate law was renumbered under the Legislation Act 2001 in R2 (see Fair Trading (Consumer Product Standards) Amendment Regulation 2004 (No 1) SL2004-28 s 10).  Details of the renumbered provisions are shown in endnote 4 (Amendment history) and endnote 6 (Renumbered provisions) in that republication.  It was also renumbered under the Legislation Act 2001 in R5 (see Fair Trading (Consumer Product Standards) Amendment Regulation 2005 (No 1) SL2005-23 s 5).  Details of the renumbered provisions are shown in endnote 4 (Amendment history) and endnote 6 (Renumbered provisions) in that republication.  It was also renumbered under the Legislation Act 2001 in R6.  See Fair Trading (Consumer Product Standards) Amendment Regulation 2008 (No 1) SL2008-12 s 6) and the following table:

previous number	provision heading	renumbered or inserted as	
part 2	Product safety standards	part 2	
division 2.1	Preliminary	division 2.1	
5	Product safety standards	5	
6	Exceptions to consumer product standards generally	6	
division 2.2	Baby bath aids	division 2.2	
6A	Definitions for div 2.2	7	
6B	Safety standard	8	
division 2.3	Balloon-blowing kits	division 2.3	
7	Definition for div 2.3	9	
8	Safety standard—balloon-blowing kits	10	
division 2.3A	Basketball rings and backboards	division 2.4	
8A	Definitions—div 2.4	11	
8B	Safety standard—warning and symbol for supplied basketball rings and backboards	12	
8C	Safety standard—permanent warning on basketball backboard	13	
division 2.4	Beanbags, beanbag covers and packages containing beanbag filling	division 2.5	
9	Definitions for div 2.5	14	
10	Safety standard—beanbags etc	15	
division 2.5	Bunk beds	division 2.6	
11	Definitions for div 2.6	16	
12	Safety standard—bunk beds	17	
division 2.6	Children’s nightwear and paper patterns for children’s nightwear	division 2.7	
13	Definitions for div 2.7	18	
14	Safety standard—children’s nightwear	19	
15	Safety standard—paper patterns for children’s nightwear	20	
16	Amendment of AS/NZS 1249	21	
17	Amendment of ISO 6941	22	
division 2.7	Children’s toys	division 2.8	
18	Definitions for div 2.8	23	
19	Safety standard—children’s toys	24	
division 2.8	Children’s household cots	division 2.9	
20	Definitions for div 2.9	25	
21	Safety standard—household cots	26	
division 2.9	Child restraints in motor vehicles	division 2.10	
22	Definitions for div 2.10	27	
23	Safety standard—child restraints	28	
24	Amendment of AS 1754—1991	29	
25	Supply of components for child restraints complying with AS 1754—1975	30	
division 2.10	Corded internal window coverings	division 2.11	
26	Definitions for div 2.11	31	
27	Safety standard—corded internal window coverings	32	
division 2.11	Flotation toys and swimming aids	division 2.12	
28	Definitions for div 2.12	33	
29	Safety standard—children’s flotation toys etc	34	
30	Amendment of AS 1900	35	
division 2.12	Disposable cigarette lighters	division 2.13	
subdiv 2.12.1	Preliminary	subdiv 2.13.1	
31	Definitions for div 2.13	36	
32	Meaning of lighter and types of lighters	37	
33	Safety standard—lighters	38	
subdiv 2.12.2	Flame testing, structural safety and labelling	subdiv 2.13.2	
34	Application of subdiv 2.13.2	39	
35	Testing procedures	40	
36	Ignition and adjustment of flame	41	
37	Abnormal burning	42	
38	Flame height	43	
39	Flame extinction	44	
40	Structural safety	45	
41	Labelling	46	
subdiv 2.12.3	Child resistance	subdiv 2.13.3	
42	Application of subdiv 2.13.3	47	
43	Child resistance	48	
44	Certification	49	
subdiv 2.12.4	Indexation	subdiv 2.13.4	
45	Indexed amount	50	
division 2.13	Laser pointers	division 2.14	
46	Definitions for div 2.14	51	
47	Safety standard—laser points	52	
division 2.13A	Monkey bikes	division 2.15	
47A	Definitions—div 2.15	53	
47B	Safety standard—monkey bikes	54	
division 2.14	Pedal bicycles	division 2.16	
48	Definitions for div 2.16	55	
49	Safety standard—pedal bicycles	56	
50	Amendment of AS/NZS 1927	57	
division 2.15	Projectile toys	division 2.17	
51	Definitions for div 2.17	58	
52	Safety standard—projectile toys	59	
53	Exceptions to div 2.17	60	
division 2.16	Protective helmets for pedal cyclists	division 2.18	
54	Definitions for div 2.18	61	
55	Safety standard—protective helmets	62	
56	Exceptions to div 2.18	63	
57	Amendment of AS/NZS 2063	64	
58	Amendment of Snell standard	65	
division 2.17	Sunglasses and fashion spectacles	division 2.19	
59	Definitions for div 2.19	66	
60	Safety standard—sunglasses and fashion spectacles	67	
division 2.18	Vehicle jacks	division 2.20	
61	Definitions for div 2.20	68	
62	Safety standard—vehicle jacks	69	
part 3	Product information standard for care labelling of certain goods	part 3	
63	Definitions for pt 3	70	
64	Application of pt 3	71	
65	Product information standard	72	
66	Amendment of AS/NZS 1957	73	
67	Form of information for certain goods	74	
68	Care instructions for goods unable to be washed or dry-cleaned	75	

©  Australian Capital Territory 2009