Australian Capital Territory
Construction Occupations (Licensing) Regulation 2004    
SL2004-36
made under the
Construction Occupations (Licensing) Act 2004
Republication No 39
Effective:  1 December 2017 – 28 February 2018
Republication date: 1 December 2017
Last amendment made by SL2017‑33

About this republication
The republished law
This is a republication of the Construction Occupations (Licensing) Regulation 2004, made under the Construction Occupations (Licensing) Act 2004 (including any amendment made under the Legislation Act 2001, part 11.3 (Editorial changes)) as in force on 1 December 2017.  It also includes any commencement, amendment, repeal or expiry affecting this republished law to 1 December 2017.  
The legislation history and amendment history of the republished law are set out in endnotes 3 and 4. 
Kinds of republications
The Parliamentary Counsel’s Office prepares 2 kinds of republications of ACT laws (see the ACT legislation register at www.legislation.act.gov.au):
•	authorised republications to which the Legislation Act 2001 applies
•	unauthorised republications.
The status of this republication appears on the bottom of each page.
Editorial changes
The Legislation Act 2001, part 11.3 authorises the Parliamentary Counsel to make editorial amendments and other changes of a formal nature when preparing a law for republication.  Editorial changes do not change the effect of the law, but have effect as if they had been made by an Act commencing on the republication date (see Legislation Act 2001, s 115 and s 117).  The changes are made if the Parliamentary Counsel considers they are desirable to bring the law into line, or more closely into line, with current legislative drafting practice.  
This republication includes amendments made under part 11.3 (see endnote 1).
Uncommenced provisions and amendments
If a provision of the republished law has not commenced, the symbol  U  appears immediately before the provision heading.  Any uncommenced amendments that affect this republished law are accessible on the ACT legislation register (www.legislation.act.gov.au). For more information, see the home page for this law on the register.
Modifications
If a provision of the republished law is affected by a current modification, the symbol  M  appears immediately before the provision heading.  The text of the modifying provision appears in the endnotes.  For the legal status of modifications, see the Legislation Act 2001, section 95.
Penalties
At the republication date, the value of a penalty unit for an offence against this law is $150 for an individual and $750 for a corporation (see Legislation Act 2001, s 133).

Australian Capital Territory
Construction Occupations (Licensing) Regulation 2004
made under the
Construction Occupations (Licensing) Act 2004
    
Contents
	Page
Part 1	Preliminary
	1	Name of regulation	2
	2	Dictionary	2
	3	Notes	2
	4	Offences against regulation—application of Criminal Code etc	3
Part 1A	Work in construction occupation
	4A	Construction occupation of builder—excluded work—Act, s 6 (3) (b)	4
Part 2	Licences
	5	Licence applications—Act, s 17 (3)	5
	6	Information required on licence—Act, s 23 (2)	7
	7	Term of licences generally—Act, s 24	8
	8	Term of licence for building assessors, building surveyors, plumbing plan certifiers and works assessors—Act, s 24	8
Part 3	Register
	9	Particulars in register	10
	10	Keeping register	11
Part 4	General eligibility requirements
Division 4.1	Eligibility to be licensed
	11	Not eligible because of suspension	12
	12	Individuals not eligible	12
	13	Eligibility for licence—qualifications and financial requirements—Act, s 18	12
	14	Skill assessment of individuals	13
	15	Corporations and partnerships eligible for some occupations	15
	16	Eligibility to be owner-builder	15
	16B	Eligibility to be building assessor	17
	17	Eligibility to be building surveyor	18
	18	Eligibility to be plumbing plan certifier	19
	18A	Eligibility to be works assessor	19
Division 4.2	Nominees
	19	Eligibility to be nominee—Act, s 28 (6)	20
Part 5	Licence conditions and endorsements
Division 5.1	Licence conditions on licences
	20	Prescribed licence conditions—Act, s 21 (1)	22
	21	Change of register information	22
	21A	Comply with code of practice	22
	22	Corporate licences	23
	23	Partnership licences	23
	24	Individual licences	23
	25	Operative drainers	23
	26	Journeyperson gasfitters	24
	27	Journeyperson plumbers	24
	28	Certain building surveyors	24
Division 5.2	Endorsements on licences
	30	Endorsing builders licences for building work—Act, s 22	25
	31	Endorsing plumbers licences for backflow prevention device test work—Act, s 22	25
	31A	Endorsing building assessors licences for use of software—Act, s 22	26
	31B	Endorsing licences for gas appliance work—Act, s 22	26
	31C	Endorsing electricians licences for work on interval meters—Act, s 22	27
	32	Considerations for endorsing licences	28
Division 5.3	Returning and replacing licences and unlicensed services
	32A	Return of licence	29
	33	Replacement licences	29
	35	Services that may be provided without licence	30
Part 6	Construction occupation classes
	36	Classes of licence generally	33
	37	Classes of builder	33
	37B	Classes of building assessor	33
	38	Classes of building surveyor	33
	39	Classes of drainer	33
	40	Classes of electrician	33
	41	Classes of gasfitters	33
	41A	Classes of gas appliance worker	34
	42	Classes of plumber	34
Part 6A	Notification and review of decisions
	42A	Reviewable decisions—Act, s 123A, def reviewable decision	35
	42B	Right of review and notice—Act, s 123B and s 123C (a)	35
Part 7	Miscellaneous
	43	Short descriptions and demerit points	36
	44	Information in report to Minister—Act, s 112	36
	45	Requirements for notices requesting skill assessment of licensees—Act, s 55A	37
Part 8	Transitional
	46	Meaning of repealed Act for pt 8	39
	47	Meaning of licence for s 9 (1) (h)	39
	48	Meaning of licensee and occupational discipline—s 9 (1) (i)	39
	49	Requirement to consult under s 13	39
	50	Meaning of owner-builders licence for s 16	40
	51	Meaning of licence for s 34	40
Part 9	Transitional—Construction Occupations (Licensing) Amendment Regulation 2017 (No 1)
	56	Meaning of authorised licensee—pt 9	41
	57	Authorisations under s 31C for undecided applications	41
	58	Expiry—pt 9	42
Schedule 1	Classes of construction occupation licence and functions	43
Part 1.3	Builder	43
Part 1.3A	Building assessor	44
Part 1.4	Building surveyor	45
Part 1.5	Drainer	46
Part 1.6	Electrician	47
Part 1.7	Gasfitters	49
Part 1.7A	Gas appliance worker	50
Part 1.8	Plumbers	51
Part 1.9	Works assessors	52
Schedule 2	Demerit grounds for occupational discipline	53
Part 2.1	Builders licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	53
Part 2.2	Building surveyors licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	64
Part 2.3	Drainers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	68
Part 2.4	Electricians licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	74
Part 2.5	Gasfitters licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	88
Part 2.6	Plumbers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	101
Part 2.7	Plumbing plan certifiers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	109
Part 2.7A	Works assessor licence demerit grounds for occupational discipline—Act, s 55 (1) (a)	111
Part 2.8	All licences demerit grounds for occupational discipline—Act, s 55 (1) (a)	112
Schedule 3	Licence demerit grounds for occupational discipline under Act, s 55 (1) (other than par (a))	114
Schedule 4	Reviewable decisions	115
Dictionary		118
Endnotes
	1	About the endnotes	121
	2	Abbreviation key	121
	3	Legislation history	122
	4	Amendment history	128
	5	Earlier republications	135

Australian Capital Territory
Construction Occupations (Licensing) Regulation 2004     

made under the
Construction Occupations (Licensing) Act 2004

    

  

Part 1	Preliminary
1	Name of regulation
This regulation is the Construction Occupations (Licensing) Regulation 2004.
2	Dictionary
The dictionary at the end of this regulation is part of this regulation.
Note 1	The dictionary at the end of this regulation defines certain terms used in this regulation, and includes references (signpost definitions) to other terms defined elsewhere.
	For example, the signpost definition ‘specialist building work—see the Building Act 2004, section 9.’ means that the term ‘specialist building work’ is defined in that section and the definition applies to this regulation.
Note 2	A definition in the dictionary (including a signpost definition) applies to the entire regulation unless the definition, or another provision of the regulation, provides otherwise or the contrary intention otherwise appears (see Legislation Act, s 155 and s 156 (1)).
3	Notes
A note included in this regulation is explanatory and is not part of this regulation.
Note	See the Legislation Act, s 127 (1), (4) and (5) for the legal status of notes.
4	Offences against regulation—application of Criminal Code etc
Other legislation applies in relation to offences against this regulation.
Note 1	Criminal Code
The Criminal Code, ch 2 applies to all offences against this regulation (see Code, pt 2.1).
The chapter sets out the general principles of criminal responsibility (including burdens of proof and general defences), and defines terms used for offences to which the Code applies (eg conduct, intention, recklessness and strict liability).
Note 2	Penalty units
The Legislation Act, s 133 deals with the meaning of offence penalties that are expressed in penalty units.

Part 1A	Work in construction occupation
4A	Construction occupation of builder—excluded work—Act, s 6 (3) (b)
	(1)	A building exempted by the Minister under the Building (General) Regulation 2008, section 7 is excluded work from the construction occupation of a builder for the stated period mentioned in the exemption, subject to any condition mentioned in the exemption.
	(2)	A building or building work mentioned in the Building (General) Regulation 2008, schedule 1, part 1.2 is excluded work from the construction occupation of a builder, subject to any condition mentioned in that part, column 3.
	(3)	A building or building work mentioned in the Building (General) Regulation 2008, schedule 1, part 1.3 is excluded work from the construction occupation of a builder, subject to any condition mentioned in that part, column 4.

Part 2	Licences
5	Licence applications—Act, s 17 (3)
A licence application must contain the following information:
	(a)	the applicant’s name;
	(b)	the construction occupation and class of construction occupation the application relates to;
	(c)	any endorsement being applied for;
	(d)	if the applicant is an individual—
	(i)	the applicant’s date of birth; and
	(ii)	the applicant’s home address; and
	(iii)	if the applicant is applying for a principal building surveyor employee or general building surveyor employee licence—the name of the applicant’s employer or proposed employer; and
	(iv)	the applicant’s mobile telephone number;
	(e)	if the applicant is a partnership—
	(i)	evidence of the existence of the partnership; and
	(ii)	the name of each partner; and
	(iii)	if a partner is a corporation—the partner’s ACN (if any); and
	(iv)	the following for each of the applicant’s nominees:
	(A)	the nominee’s name, business address, email address and mobile telephone number;
	(B)	the nominee’s landline telephone number and fax number (if any);
	(f)	if the applicant is a corporation—
	(i)	its ACN (if any); and
	(ii)	the following for each of the applicant’s nominees:
	(A)	the nominee’s name, business address, email address and mobile telephone number;
	(B)	the nominee’s landline telephone number and fax number (if any); and
	(iii)	if the history of the corporation is on a database kept by the Australian Securities and Investments Commission—an extract about the history of the corporation from the database;
	(g)	the applicant’s—
	(i)	business telephone number and email address; and
	(ii)	fax number (if any);
	(h)	if the application is for a licence as—
	(i)	a building assessor—the name of the insurer who will provide the insurance mentioned in section 16B (Eligibility to be building assessor); or
	(ii)	a building surveyor—the name of the insurer who will provide the insurance mentioned in section 17 (Eligibility to be building surveyor); or
	(iii)	a plumbing plan certifier—the name of the insurer who will provide the insurance mentioned in section 18 (Eligibility to be plumbing plan certifier); or
	(iv)	a works assessor—the name of the insurer who will provide the insurance mentioned in section 18A (Eligibility to be works assessor);
	(i)	evidence that the applicant is eligible to be licensed in the construction occupation or class of construction occupation applied for;
	(j)	if an endorsement is being applied for—evidence that the applicant is capable of providing each construction service allowed to be provided under the endorsement;
	(k)	whether the applicant has been licensed before and, if so, details of each previous licence;
	(l)	whether the applicant has been convicted or found guilty of any offence involving fraud, dishonesty or violence, punishable by imprisonment for 1 year or more and, if so, details of each conviction or finding.
Note	Under the Spent Convictions Act 2000, an applicant need not include in an application certain spent convictions or extinguished convictions (see that Act, s 16 (c) (i) and s 19H (1) (c) (i)).
6	Information required on licence—Act, s 23 (2)
	(1)	In addition to the information required by the Act, section 23 (2), the following information must be included on a licence:
	(a)	any endorsement relating to the licence;
	(b)	the period for which the licence is issued in relation to each construction occupation and class of construction occupation;
	(c)	if the licensee is a partnership—
	(i)	the name of each partner; and
	(ii)	if a partner is a corporation—the partner’s ACN (if any);
	(d)	if the licensee is a corporation—its ACN (if any);
	(e)	whether the licence is subject to conditions and, if it is, which construction occupation or class of construction occupation the conditions apply to.
	(2)	A licence condition may, but need not, be included on the licence.
7	Term of licences generally—Act, s 24
	(1)	The maximum period for which a licence in the following construction occupations may be issued or renewed is 3 years:
	(a)	builder;
	(b)	electrician;
	(c)	plumber;
	(d)	drainer;
	(e)	gasfitter;
	(f)	gas appliance worker.
	(2)	However, an applicant for the issue or renewal of the licence may apply for a 1-year licence and, if the applicant does apply, the maximum period for which the licence may be issued or renewed is 1 year.
8	Term of licence for building assessors, building surveyors, plumbing plan certifiers and works assessors—Act, s 24
	(1)	This section applies to a licence in the construction occupation of the following:
	(a)	building assessor; 
	(b)	building surveyor; 
	(c)	plumbing plan certifier;
	(d)	works assessor.
	(2)	The maximum period for which a licence may be issued or renewed is 1 year.
	(3)	However, if the applicant for the issue or renewal of the licence has insurance required under this regulation for a period of less than 1 year, the maximum period for which the licence may be issued or renewed is the period for which the applicant has insurance.

Part 3	Register
9	Particulars in register
	(1)	The register must contain the following particulars in relation to a licensee:
	(a)	the details included in the licensee’s licence;
	(b)	the licensee’s—
	(i)	business telephone number and email address; and
	(ii)	fax number (if any);
	(c)	if the licensee is—
	(i)	a building assessor—the name of the insurer who provides the insurance mentioned in section 16B (Eligibility to be building assessor); or
	(ii)	a building surveyor—the name of the insurer who provides the insurance mentioned in section 17 (Eligibility to be building surveyor); or
	(iii)	a plumbing plan certifier—the name of the insurer who provides the insurance mentioned in section 18 (Eligibility to be plumbing plan certifier); or
	(iv)	a works assessor—the name of the insurer who provides the insurance mentioned in section 18A (Eligibility to be works assessor);
	(d)	if the licensee is an individual—the licensee’s mobile telephone number;
	(e)	if the licensee is a corporation or partnership—
	(i)	the name, business address, email address and mobile telephone number of each of the licensee’s nominees; and
	(ii)	the landline telephone number and fax number (if any) of each of the licensee’s nominees;
	(f)	if the licensee’s licence is suspended—details of the suspension;
	(g)	if the licensee has ever had a licence suspended—details of the suspension, if available;
	(h)	details of any suspension of the licence, whether or not the suspension has ended, if available;
	(i)	details of any occupational discipline taken in relation to the licensee, if available;
	(j)	whether any occupational discipline is being taken in relation to the licensee.
	(2)	The registrar may enter in the register any other details the registrar considers appropriate, including information about former licensees.
10	Keeping register
The registrar may—
	(a)	correct a mistake, error or omission in the register; or
	(b)	correct or omit an entry that has become inaccurate.

Part 4	General eligibility requirements
Division 4.1	Eligibility to be licensed
11	Not eligible because of suspension
An entity is not eligible to be licensed in a construction occupation or class of construction occupation if—
	(a)	the entity is licensed in another occupation or class of occupation; and
	(b)	the licence is suspended; and
	(c)	the registrar is satisfied that, because of the grounds for the suspension, it is not appropriate for the entity to be licensed in the occupation or class of occupation.
Note	A suspended licence may be renewed (see Act, s 25 (4)).
12	Individuals not eligible
An individual is not eligible to be licensed if—
	(a)	the application is for a licence that would allow the applicant to provide a construction service without supervision; and
	(b)	the individual has been found guilty of an offence—
	(i)	that involves fraud or dishonesty; and
	(ii)	is punishable by imprisonment for at least 1 year.
13	Eligibility for licence—qualifications and financial requirements—Act, s 18
	(1)	The Minister may declare the qualifications and financial requirements necessary for an entity to be eligible to be licensed in a construction occupation or occupation class.
	(2)	Before making a declaration in relation to a construction occupation or occupation class, the Minister may consult the advisory board for the occupation or class.
	(3)	A declaration is a disallowable instrument.
Note	A disallowable instrument must be notified, and presented to the Legislative Assembly, under the Legislation Act.
	(4)	A declaration may apply, adopt or incorporate a law of another jurisdiction or instrument as in force from time to time.
	(5)	The Legislation Act, section 47 (5) or (6) does not apply in relation to the law of another jurisdiction or instrument applied, adopted or incorporated under a declaration.
Note	Laws of another jurisdiction and instruments mentioned in s (4) do not need to be notified under the Legislation Act because s 47 (5) and (6) do not apply (see Legislation Act, s 47 (7)).
	(6)	In this section:
law of another jurisdiction—see the Legislation Act, section 47 (10).
14	Skill assessment of individuals
	(1)	This section applies if—
	(a)	the registrar is not satisfied that an applicant has a qualification required to be eligible for the licence applied for; or
	(b)	the registrar—
	(i)	is satisfied that an applicant has a qualification required to be eligible for the licence applied for; and
	(ii)	is not satisfied on reasonable grounds that the applicant has a skill reasonably necessary to satisfactorily exercise the functions of a construction occupation or class of construction occupation under the licence applied for; and
	(iii)	believes on reasonable grounds that requiring the applicant to be assessed under this section is necessary or desirable to protect the public.
	(2)	The registrar may require the applicant to undertake an assessment to find out whether the applicant has a skill reasonably necessary to satisfactorily exercise the functions of a construction occupation or class of construction occupation under the licence applied for.
	(3)	An assessment may consist of 1 or more of the following:
	(a)	an assessment by a person who the registrar is satisfied is competent to make the assessment;
	(b)	an examination, which may have practical, written and oral aspects, by a registered training organisation that the registrar is satisfied is competent to set and assess the examination;
	(c)	an examination of a record of the applicant’s experience provided by the applicant;
	(d)	the undertaking of a test, or a series of tests, approved by the registrar.
	(4)	The applicant must pay to the Territory the reasonable costs incurred by the Territory in arranging or carrying out an assessment.
	(5)	An applicant is not eligible to be licensed if the applicant has not complied with subsection (4).
	(6)	In this section:
registered training organisation—see the National Vocational Education and Training Regulator Act 2011 (Cwlth), section 3.
15	Corporations and partnerships eligible for some occupations
	(1)	A corporation or partnership is eligible to be licensed only in the following construction occupations or occupation classes:
	(a)	builder;
	(b)	building surveyor;
	(c)	drainer;
	(d)	electrician, electrical contractor class;
	(e)	gasfitter;
	(f)	plumber;
	(g)	plumbing plan certifier;
	(h)	works assessor.
	(2)	Also, a corporation or partnership is eligible to be licensed in a construction occupation or occupation class only if the corporation or partnership has a nominee who is licensed in the occupation or class.
	(3)	However, a partnership is not eligible to be licensed in a construction occupation or occupation class if a partner has been found guilty, whether in the ACT or anywhere else, of an offence involving fraud, dishonesty or violence punishable by imprisonment for at least 1 year.
16	Eligibility to be owner-builder
	(1)	An individual is eligible to be an owner-builder only if—
	(a)	the individual owns the land where the building work allowed under the owner-builders licence is proposed to be undertaken; and
	(b)	the building work has building approval under the Building Act 2004; and
	(c)	the individual has not been issued with an owner-builders licence in relation to other land (a previous licence) in the 5 years before applying for the owner-builders licence (the current licence).
	(2)	Despite section (1) (c), an individual issued with a previous licence in the 5 years before applying for the current licence is eligible to be an owner-builder if the individual no longer holds the previous licence and—
	(a)	if—
	(i)	the work allowed under the previous licence related to affected residential premises or a class 10 building associated with those premises; and
	(ii)	the affected residential premises were acquired by the Territory from the individual under the buyback scheme for residential premises and were included in the affected residential premises register; or 
	(b)	if—
	(i)	the work allowed under the previous licence related to a building that is or was an eligible impacted property or a  class 10 building associated with that property; and
	(ii)	the eligible impacted property was acquired by the Territory from the individual under the eligible impacted property buyback program.
	(3)	In this section:
affected residential premises—see the Civil Law (Sale of Residential Property) Act 2003, section 9A (3).
affected residential premises register—see the Dangerous Substances Act 2004, section 47N (1).
buyback scheme, for affected residential premises—see the Dangerous Substances Act 2004, section 47N (6).
class, of building—see the Building Act 2004, dictionary.
Note	A class 10 building or structure is a non-habitable building or structure (see building code).
eligible impacted property—see the Civil Law (Sale of Residential Property) Act 2003, section 9A (1).
eligible impacted property buyback program—see the Civil Law (Sale of Residential Property) Act 2003, section 9A (1).
16B	Eligibility to be building assessor
	(1)	An applicant for a licence as a building assessor is eligible for the licence only if the applicant satisfies the registrar that—
	(a)	the applicant is adequately insured; and
	(b)	if the class of licence applied for must be endorsed to authorise the licensee to operate stated software—the applicant can competently operate the software. 
Note	The registrar may determine software that a class of building assessor’s licence must be endorsed to authorise the licensee to operate (see s 31A).
	(2)	An applicant is adequately insured if the applicant has professional indemnity insurance that provides—
	(a)	indemnity against claims for breach of professional duty as a building assessor; and
	(b)	a minimum limit of indemnity of $1 000 000 for a single claim.
17	Eligibility to be building surveyor
	(1)	An applicant for a licence as a building surveyor is eligible for the licence only if the applicant satisfies the registrar that—
	(a)	the applicant has successfully undertaken asbestos management training that has been approved by the registrar under subsection (2); and
	(b)	the applicant is adequately insured.
	(2)	The registrar may approve asbestos management training for subsection (1) (a) if the registrar considers that successful undertaking of the training will give an applicant for a licence as a building surveyor adequate knowledge of the requirements to deal appropriately with asbestos.
	(3)	Subsection (1) (b) does not apply to an application for a licence as principal government building surveyor or government building surveyor.
	(4)	An applicant is adequately insured if the applicant has professional indemnity insurance that provides—
	(a)	indemnity against claims for breach of professional duty as a building surveyor; and
	(b)	a minimum limit of indemnity of $1 000 000 for a single claim; and
	(c)	a minimum limit of indemnity of $1 000 000 for the total of all claims made against the applicant during the period of cover; and
	(d)	in addition to the indemnities mentioned in paragraphs (b) and (c), a minimum limit of indemnity for the costs and expenses of defending or settling a claim of 20% of the limit of indemnity for the claim.
	(5)	For subsection (4), an applicant is taken to have professional indemnity insurance if the applicant is an applicant for a principal building surveyor employee licence, or general building surveyor employee licence, and the applicant’s employer has the insurance.
	(6)	In subsection (4) (d):
costs and expenses means costs and expenses incurred with the insurer’s consent.
	(7)	An approval under subsection (2) is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act.
18	Eligibility to be plumbing plan certifier
	(1)	An applicant for a licence as a plumbing plan certifier is eligible for the licence only if the applicant satisfies the registrar that the applicant is adequately insured.
	(2)	An applicant is adequately insured to be a plumbing plan certifier if the applicant has professional indemnity insurance that provides—
	(a)	indemnity against claims for breach of professional duty as a plumbing plan certifier; and
	(b)	a minimum limit of liability of $1 000 000 for each period of insurance.
18A	Eligibility to be works assessor
	(1)	An applicant for a licence to be a works assessor is eligible for the licence only if the applicant satisfies the registrar that the applicant is adequately insured.
	(2)	An applicant is adequately insured if the applicant has professional indemnity insurance that provides—
	(a)	indemnity against claims for breach of professional duty as a works assessor; and
	(b)	a minimum limit of indemnity of $1 000 000 for a single claim; and
	(c)	a minimum limit of indemnity of $1 000 000 for the total of all claims made against the applicant during the period of cover; and
	(d)	in addition to the indemnities mentioned in paragraphs (b) and (c), a minimum limit of indemnity for the costs and expenses of defending or settling a claim of 20% of the limit of indemnity for the claim.
	(3)	In subsection (2) (d):
costs and expenses means costs and expenses incurred with the insurer’s consent.
Division 4.2	Nominees
19	Eligibility to be nominee—Act, s 28 (6)
An individual is eligible to be a nominee of a corporation or partnership if—
	(a)	for a corporation—the individual is a director or employee of the corporation; and
	(b)	for a partnership—the individual—
	(i)	is a partner; or
	(ii)	is the nominee of a corporation that is a partner in the partnership; and
	(c)	the individual is licensed in a construction occupation that the corporation or partnership is licensed in or applying to be licensed in; and
	(d)	the individual is otherwise able to exercise the functions of a nominee on a daily basis; and
Examples
1	The individual is not able to exercise the functions of a nominee on a daily basis if the licensee is the nominee for another corporation that has no other nominees and is doing a lot of construction work.
2	The individual is reasonably able exercise the functions of a nominee if the nominee is available to attend locations where the construction services the nominee will be responsible for supervising are being carried out. 
Note	An example is part of the regulation, is not exhaustive and may extend, but does not limit, the meaning of the provision in which it appears (see Legislation Act, s 126 and s 132).
	(e)	for a construction occupation divided into classes—either—
	(i)	the individual is licensed in the same class as, or a class that allows the exercising of the same functions as, the class the corporation or partnership is licensed in or applying to be licensed in; or
	(ii)	the corporation or partnership has a nominee mentioned in subparagraph (i); and
	(f)	the individual’s licence is not subject to 1 or more of the following conditions (however described):
	(i)	that the individual must not be a nominee for a stated period, and the period in question is within the stated period;
	(ii)	that the individual must not supervise trainees or licensees;
	(iii)	that the individual must be supervised by someone else.
Note	For functions of nominees, see the Act, s 31.

Part 5	Licence conditions and endorsements
Division 5.1	Licence conditions on licences
20	Prescribed licence conditions—Act, s 21 (1)
The conditions a licence is subject to include the applicable requirements in this division.
Note	The registrar may also impose conditions on a licence (see Act, s 21 (2)).
21	Change of register information
	(1)	The licensee must tell the registrar in writing of any change in a detail relating to the licensee that is recorded in the register.
	(2)	The notice must be given within 2 weeks after—
	(a)	the day of the change to which it relates happened; or
	(b)	the day the licensee became aware of the change.
21A	Comply with code of practice
	(1)	This section applies to a licensee if a code of practice applies to the licensee’s construction occupation or class of construction occupation, or to a construction service undertaken by the licensee.
	(2)	The licensee must comply with the code of practice, including by using any form of report, certificate or other document (if any) required by the code of practice.
	(3)	In this section:
code of practice means a code of practice under this Act or an operational Act.
22	Corporate licences
	(1)	This section applies if the licensee is a corporation.
	(2)	The licensee must tell the registrar in writing if a person becomes or stops being a director or a nominee (other than the sole nominee of the corporation for a construction service, construction occupation or occupation class).
	(3)	The notice must be given to the registrar within 1 business day after the day the person becomes or stops being a director or nominee.
23	Partnership licences
	(1)	This section applies if the licensee is a partnership.
	(2)	The partnership must tell the registrar in writing if a person becomes or stops being a partner or a nominee (other than the sole nominee of the partnership for a construction service, construction occupation or occupation class).
	(3)	The notice must be given to the registrar within 1 business day after the day the person becomes or stops being a partner or nominee.
24	Individual licences
	(1)	This section applies if the licensee is an individual.
	(2)	The individual may provide construction services only as a nominee or employee of a licensed entity if—
	(a)	the individual becomes bankrupt or personally insolvent; and
	(b)	the individual is a nominee or employee of a licensed entity.
25	Operative drainers
A licensee in the operative drainer class of the construction occupation drainer may only provide a construction service in that occupation class as an employee.
26	Journeyperson gasfitters
A licensee in the journeyperson gasfitter class in the construction occupation gasfitter may only provide a construction service in that occupation class as an employee.
27	Journeyperson plumbers
A licensee in the journeyperson plumber class in the construction occupation of plumber may only provide a construction service in that occupation class as an employee.
28	Certain building surveyors
	(1)	This section applies to licensees in the following classes in the construction occupation of building surveyor:
	(a)	principal building surveyor employee;
	(b)	general building surveyor employee.
	(2)	The licensee may only provide a construction service in that occupation class as an employee of a licensee who—
	(a)	is licensed as—
	(i)	a principal building surveyor; or
	(ii)	a general building surveyor; and
	(b)	holds insurance of a kind mentioned in section 17 in relation to the employee.
Division 5.2	Endorsements on licences
30	Endorsing builders licences for building work—Act, s 22
	(1)	The registrar may, on application, endorse a builders licence to authorise the licensee to do any building work, including specialist building work, if satisfied that the licensee can competently do the work.
Note	If deciding whether to endorse a licence under this section, the registrar must consider the considerations in s 32.
	(2)	The endorsement may be subject to any condition the registrar is satisfied protects the public.
31	Endorsing plumbers licences for backflow prevention device test work—Act, s 22
	(1)	The registrar may, on application, endorse a plumbers licence to authorise the licensee to do backflow prevention device test work if satisfied that the licensee can competently do the work.
Note	If deciding whether to endorse a licence under this section, the registrar must consider the considerations in s 32.
	(2)	In this section:
backflow prevention device test work means—
	(a)	work in accordance with Australian Standard 2845.3, Water Supply—Backflow prevention devices—Field testing and maintenance, to test, or supervise the testing of, a backflow prevention device that forms part of a water service, hot-water system, irrigation system or fire sprinkler system; or
	(b)	the production of a report about a test under paragraph (a).
31A	Endorsing building assessors licences for use of software—Act, s 22
	(1)	The registrar may, on application, endorse a building assessor’s licence to authorise the licensee to operate stated software if satisfied that the licensee can competently operate the software.
Note	If deciding whether to endorse a licence under this section, the registrar must consider the considerations in s 32.
	(2)	The registrar may determine—
	(a)	that a class of building assessor’s licence must be endorsed to authorise a licensee to operate software; and
	(b)	the software that the class of licence must be endorsed to authorise a licensee to operate.
	(3)	A determination is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act.
31B	Endorsing licences for gas appliance work—Act, s 22
	(1)	This section applies to—
	(a)	an advanced gasfitters licence; and
	(b)	a general gasfitters licence.
	(2)	The registrar may, on application, endorse the licence to authorise the licensee to do type B gas flue work, if satisfied that the licensee is competent to do the work.
Note	In deciding whether to endorse a licence under this section, the registrar must consider the considerations in s 32.
	(3)	In this section:
type B gas flue work means work on the flue of a type B gas appliance, including the connection of the flue to, and disconnection of the flue from, the appliance.
31C	Endorsing electricians licences for work on interval meters—Act, s 22
	(1)	The registrar may, on application, endorse an electrical contractor licence or an unrestricted electrician licence to authorise the licensee to do, or to supervise, interval metering work if satisfied that the licensee is competent to do, or to supervise, the work.
Note 1	A metering provider operating in the National Energy Market must be registered with the Australian Energy Market Operator to provide, install, and maintain a metering installation (see National Electricity Rules, ch 7 (Metering)).
Note 2	In deciding whether to endorse a licence under this section, the registrar must consider the considerations in s 32.
	(2)	The endorsement may be subject to any condition the registrar is satisfied protects the public.
	(3)	For this regulation, interval metering work means the following:
	(a)	electrical wiring work on an interval meter;
	(b)	removing a type 5, type 6, or type 7 meter to replace it with an interval meter.
	(4)	In this section:
interval meter means a type 1, type 2, type 3, or type 4 metering installation that meets the requirements described in the National Electricity Rules, chapter 7, schedule 7.2 (Types and Accuracy of Metering Installations) for the type of meter.
metering installation—see the National Electricity Rules, chapter 10 (Glossary).
national electricity rules means the National Electricity Rules made under the National Electricity (ACT) Law.
type 5, type 6, or type 7 meter means a type 5, type 6, or type 7 metering installation that meets the requirements described in the National Electricity Rules, chapter 7, schedule 7.2 (Types and Accuracy of Metering Installations) for the type of meter.
32	Considerations for endorsing licences
	(1)	In deciding whether to endorse an individual’s licence under this division, the registrar must consider the following:
	(a)	the individual’s physical ability or skill;
	(b)	the individual’s qualifications, training and knowledge;
	(c)	the extent, quality and relevance of the individual’s experience, and how recent that experience is, in doing similar work to, or work that is equally complex as, the work to be allowed by the proposed endorsement;
	(d)	whether any occupational discipline has ever been taken in relation to the individual;
	(e)	whether the individual has incurred any demerit points that have not been deleted from the register.
	(2)	In deciding whether to endorse the licence of a corporation or partnership, the registrar must consider the following:
	(a)	whether any occupational discipline has ever been taken in relation to the entity; 
	(b)	whether the entity has incurred any demerit points that have not been deleted from the register.
	(3)	However, the registrar may endorse the licence of the corporation or partnership only if nominees of the entity have licences that are endorsed in the way applied for.
	(4)	The registrar may consider anything else that is relevant.
Division 5.3	Returning and replacing licences and unlicensed services
32A	Return of licence
	(1)	This section applies if the registrar decides to—
	(a)	amend a condition on a licence; or
	(b)	endorse a licence.
	(2)	The registrar may require a licensee to return the licence to the registrar in relation to the amendment or endorsement.
Note	The registrar may, but need not, include a condition on a licence (see s 6 (2)).
	(3)	If the registrar requires the licensee to return the licence—
	(a)	the licensee must return the licence; and
	(b)	the registrar must return the licence to the licensee as soon as the licence is amended (whether by including the condition on the licence or otherwise) or endorsed, unless the licence is suspended or cancelled.
	(4)	A licensee commits an offence if the licensee fails to return a licence under subsection (3) (a).
Maximum penalty: 5 penalty units.
	(5)	An offence against subsection (4) is a strict liability offence.
33	Replacement licences
The registrar may, on application, issue a replacement licence to a licensee if satisfied that the licence previously issued has been lost, stolen, damaged or destroyed.
Note 1	A fee may be determined under the Act, s 127 for this provision.
Note 2	If a form is approved under the Act, s 128 for this provision, the form must be used.
35	Services that may be provided without licence
	(1)	The following construction services may be provided by an individual without a licence if done under the supervision of a licensed individual, or the nominee of a licensed corporation or partnership, authorised by the licence to provide the service:
	(a)	building services;
	(b)	if the individual providing the service is a trainee—
	(i)	electrical wiring services; or
	(ii)	gasfitting services; or
	(iii)	plumbing services; or
	(iv)	sanitary drainage services.
	(2)	Also, subsection (1) (b) applies only if—
	(a)	there is a training arrangement (however described) between the trainee’s relevant person and the trainee; and
Example—training arrangement
an approved training contract under the Training and Tertiary Education Act 2003
Note	An example is part of the regulation, is not exhaustive and may extend, but does not limit, the meaning of the provision in which it appears (see Legislation Act, s 126 and s 132).
	(b)	the construction service provided by the trainee is covered by the training arrangement; and
	(c)	the trainee’s relevant person gives the registrar the following information:
	(i)	if the relevant person is the trainee’s employer who is an individual—
	(A)	the employer’s name, business address and email address; and
	(B)	the employer’s landline telephone number or mobile telephone number; and
	(C)	the employer’s fax number (if any);
	(ii)	if the relevant person is the trainee’s employer who is not an individual—
	(A)	the name of the employer and the trainee’s manager; and
	(B)	the business address and email address of the employer and manager; and
	(C)	the landline telephone number or mobile telephone number of the employer and manager; and
	(D)	the fax number (if any) of the employer and manager;
	(iii)	if the relevant person is the provider of the VET course that the trainee is undertaking—
	(A)	the provider’s name, business address and email address; and
	(B)	the name of the person nominated by the provider for the trainee (the nominated person); and
	(C)	the nominated person’s email address; and
	(D)	the nominated person’s landline telephone number or mobile telephone number;
	(iv)	the trainee’s name and date of birth;
	(v)	the name of the VET course that the trainee is undertaking and its unique identifying number (however described);
	(vi)	when the training arrangement begins and ends.
Note	If a form is approved under the Act, s 128 for this provision, the form must be used.
	(3)	In this section:
building service—see the Act, section 8 (2).
electrical wiring service—see the Act, section 11 (2).
gasfitting service—see the Act, section 12 (2).
plumbing service—see the Act, section 13 (2).
relevant person, of a trainee, means—
	(a)	the trainee’s employer; or
	(b)	if the trainee does not have an employer—the provider of the VET course that the trainee is undertaking.
sanitary draining service—see the Act, section 10 (2).
trainee, for a service, means an individual who—
	(a)	provides the service to gain experience in providing the service and training from the person supervising the provision of the service; and
	(b)	is undertaking a VET course that provides instruction in relation to providing the service.
VET course—see the National Vocational Education and Training Regulator Act 2011 (Cwlth), section 3.

Part 6	Construction occupation classes
    
36	Classes of licence generally
A licence for a class authorises the licensee to provide each service in schedule 1, column 3 for the class in the circumstances (if any) stated in the column for the item.
37	Classes of builder
The construction occupation of builder is divided into the classes in schedule 1, part 1.3, column 2.
37B	Classes of building assessor
The construction occupation of building assessor is divided into the classes in schedule 1, part 1.3A, column 2.
38	Classes of building surveyor
The construction occupation of building surveyor is divided into the classes in schedule 1, part 1.4, column 2.
39	Classes of drainer
The construction occupation of drainer is divided into the classes in schedule 1, part 1.5, column 2.
40	Classes of electrician
The construction occupation of electrician is divided into the classes in schedule 1, part 1.6, column 2.
41	Classes of gasfitters
The construction occupation of gasfitter is divided into the classes in schedule 1, part 1.7, column 2.
41A	Classes of gas appliance worker
The construction occupation of gas appliance worker is divided into the classes in schedule 1, part 1.7A, column 2.
42	Classes of plumber
The construction occupation of plumber is divided into the classes in schedule 1, part 1.8, column 2.

Part 6A	Notification and review of decisions
42A	Reviewable decisions—Act, s 123A, def reviewable decision
A decision mentioned in schedule 4, column 3, under a provision mentioned in column 2 in relation to the decision is prescribed.
42B	Right of review and notice—Act, s 123B and s 123C (a)
An entity mentioned in schedule 4, column 4 is prescribed.

Part 7	Miscellaneous
43	Short descriptions and demerit points
	(1)	The short description for a demerit ground for occupational discipline that is a contravention of the Act or an operational Act mentioned in schedule 2, column 2 is the description mentioned in the item, column 3.
	(2)	The short description for a demerit ground for occupational discipline under the Act, section 55 (1) (other than paragraph (a)) that is mentioned in schedule 3, column 2 is the description mentioned in the item, column 3.
	(3)	The number of demerit points mentioned in schedule 2, column 4 or schedule 3, column 4 is prescribed for the demerit ground for occupational discipline mentioned in the item, column 2.
	(4)	For a demerit ground for occupational discipline that is not mentioned in subsection (3), the demerit points for the ground is one.
44	Information in report to Minister—Act, s 112
	(1)	The registrar’s report to the Minister about complaints for a financial year must include the following information:
	(a)	the total number of complaints made in the year;
	(b)	the number of complaints made about former licensees;
	(c)	the number of complaints made about current licensees;
	(d)	a description of the kinds of complaints made about licensees and former licensees in each construction occupation.
	(2)	The registrar’s report to the Minister about occupational discipline for a financial year must include the following information:
	(a)	the name of each licensee or former licensee against whom occupational discipline was taken during the financial year;
	(b)	for each licensee or former licensee mentioned in paragraph (a)—
	(i)	the contravention; and
	(ii)	the construction occupation or class of construction occupation in which the licensee or former licensee was licensed when the contravention happened; and
	(iii)	the occupational discipline taken; and
	(iv)	the result of any review of the decision to take occupational discipline.
	(3)	In this section:
contravention, in relation to a licensee or former licensee, means what the licensee or former licensee did that caused occupational discipline to be taken.
45	Requirements for notices requesting skill assessment of licensees—Act, s 55A
The notice must state—
	(a)	the reasons for requiring the assessment; and
	(b)	the consequences under the Act of failing to complete the assessment; and
	(c)	information about the assessment, including who must conduct the assessment; and
	(d)	the latest date by which the licensee must complete the assessment that the registrar considers on reasonable grounds is reasonable; and
	(e)	if the licensee is to be given the written results of the assessment by the person conducting the assessment—the latest date by which the licensee must give the results to the registrar; and
	(f)	that the licensee may make written representations to the registrar about 1 or more of the following not later than 5 business days after the day the notice is given to the licensee:
	(i)	the registrar’s reasons for requiring the assessment;
	(ii)	the proposed assessment;
	(iii)	the latest date by which the licensee must complete the assessment stated in the notice;
	(iv)	the latest date by which the licensee must give the results to the registrar if the licensee is to be given the written results of the assessment by the person conducting the assessment.

Part 8	Transitional
46	Meaning of repealed Act for pt 8
In this part:
repealed Act means the Construction Practitioners Registration Act 1998 (repealed).
47	Meaning of licence for s 9 (1) (h)
In section 9 (1) (h):
licence includes—
	(a)	registration under the repealed Act; and
	(b)	a licence, permit or registration under an operational Act as in force immediately before commencement day; and
	(c)	a licence or certificate of competency under the Plumbers, Drainers and Gasfitters Board Act 1982 (repealed).
48	Meaning of licensee and occupational discipline—s 9 (1) (i)
In section 9 (1) (i):
licensee includes a person registered under the repealed Act.
occupational discipline is taken to include action taken under the repealed Act, section 22 (6) (Procedure).
49	Requirement to consult under s 13
	(1)	The registrar need not consult the advisory board for a construction occupation before making a declaration about qualifications for the construction occupation or an occupation class under section 13 on or before the commencement of this section.
	(2)	However, the registrar must consult the advisory board for the construction occupation about the qualification for the construction occupation within 1 year after the commencement of this section.
50	Meaning of owner-builders licence for s 16
In section 16:
owner-builders licence includes an owner-builder’s licence granted under the Building Act 1972 before the commencement of the Act, section 6 (What is a construction practitioner?).
51	Meaning of licence for s 34
In section 34:
licence includes—
	(a)	registration under the repealed Act; and
	(b)	a licence, permit or registration under an operational Act as in force immediately before commencement day; and
	(c)	a licence or certificate of competency under the Plumbers, Drainers and Gasfitters Board Act 1982 (repealed).

Part 9	Transitional—Construction Occupations (Licensing) Amendment Regulation 2017 (No 1)
56	Meaning of authorised licensee—pt 9
In this part:
authorised licensee means a licensee who holds an electrical contractor licence or an unrestricted electrician licence that has an endorsement under section 31C (Endorsing electricians licences for work on interval meters) to supervise interval metering work.
57	Authorisations under s 31C for undecided applications
	(1)	This section applies if—
	(a)	before 14 February 2018, a licensee who holds an electrical contractor licence or an unrestricted electrician licence applied to the registrar for an endorsement under section 31C (Endorsing electricians licences for work on interval meters); and
Note	The power to receive, consider and decide an application under s 31C may be exercised by the registrar before the commencement of this section (see Legislation Act, s 81).
	(b)	the registrar has not made a decision on the application.
	(2)	The licensee is taken to be authorised under section 31C to do interval metering work on the condition that the licensee works under the supervision of an authorised licensee.
58	Expiry—pt 9
This part expires on 28 February 2018.
Note	Transitional provisions are kept in the Act for a limited period. A transitional provision is repealed on its expiry but continues to have effect after its repeal (see Legislation Act, s 88).

Schedule 1	Classes of construction occupation licence and functions
(see pt 6)
Part 1.3	Builder

column 1
item	column 2
construction occupation class	column 3
construction work	
1	class A	building work other than specialist building work	
2	class B		(a)	building work (other than specialist building work) in relation to a building that is 3 storeys or lower; and
	(b)	basic building work	
3	class C		(a)	building work (other than specialist building work) in relation to a building that is 2 storeys or lower and is a class 1, class 2 or class 10a building; and
	(b)	building work (other than specialist building work) in relation to a building that is a class 10b structure (other than a swimming pool or swimming pool fence) and is ancillary to a building mentioned in paragraph (a); and
	(c)	basic building work	
4	class D	non-structural basic building work, other than specialist building work	
5	owner-builder	building work, other than specialist building work, in relation to a class 1, class 2 or class 10 building that is, or is to be, the licensee’s main home or ancillary to it	
Note	For building work that involves asbestos removal, a builder must hold an asbestos removal licence (see Work Health and Safety Regulation 2011, div 8.10.1).

Part 1.3A	Building assessor

column 1
item	column 2
construction occupation class	column 3
construction work	
1	class A building assessor—energy efficiency		(a)	the following building assessment work, based on an on-site inspection:
	(i)	preparing an energy efficiency certificate under the Building Act 2004; or
	(ii)	preparing an energy efficiency rating statement.
Note	Energy efficiency certificate—see the Building Act 2004, s 139C.
	(b)	doing anything allowed to be done under a class B licence	
2	class B building assessor—energy efficiency	the following building assessment work, based on the plans of a building:
	(a)	preparing an energy efficiency certificate under the Building Act 2004; or
	(b)	preparing an energy efficiency rating statement.
Note	Energy efficiency certificate—see the Building Act 2004, s 139C.	

Part 1.4	Building surveyor

column 1
item	column 2
construction occupation class	column 3
construction work	
1	principal building surveyor	building certification work or, for a corporation, supervision of building certification work	
2	principal building surveyor employee	building certification work as an employee of a principal building surveyor	
3	general building surveyor	building certification work or, for a corporation, supervision of building certification work, in relation to a building that is 3 storeys or lower and that has a floor area of 2 000m2 or less	
4	general building surveyor employee	building certification work in relation to a building that is 3 storeys or lower and that has a floor area of 2 000m2 or less, as an employee of a principal building surveyor or general building surveyor	
5	principal government building surveyor	building certification work	
6	government building surveyor	building certification work in relation to a building that is 3 storeys or lower and that has a floor area of 2 000m2 or less	

Part 1.5	Drainer

column 1
item	column 2
construction occupation class	column 3
construction work	
1	advanced sanitary drainer	sanitary drainage work without supervision	
2	journeyperson drainer	sanitary drainage work under supervision of licensee with advanced sanitary drainers licence	
3	operative drainer	sanitary drainage work under supervision of licensee with advanced sanitary drainers licence	

Part 1.6	Electrician

column 1
item	column 2
construction occupation class	column 3
construction work	
1	electrical contractor	1	electrical wiring work, other than interval 	metering work, without supervision
2	supervision of electrical wiring work, other 	than interval metering work	
2	unrestricted	1	electrical wiring work, other than interval 	metering work, without supervision
2	supervision of electrical wiring work, other 	than interval metering work	
3	electrotechnology systems permit	1	electrical wiring work under supervision
2	incidental electrical work	
4	restricted—electrotechnology systems assembly and servicing electrical fitting	electrotechnology assembly and servicing incidental to electrical wiring work in relation to electrical fitting disconnection and reconnection work	
5	restricted—electrotechnology systems mechanical fitting	electrotechnology systems incidental to electrical wiring work in relation to mechanical fitting disconnection and reconnection work	
6	restricted–electrotechnology systems plumbing and gas fitting	electrotechnology systems incidental to electrical wiring work in relation to plumbing and gasfitting disconnection and reconnection work	
7	restricted–electrotechnology systems refrigeration and air conditioning	incidental electrical wiring work in relation to refrigeration and air conditioning disconnection and reconnection work	
8	restricted— electrotechnology systems type B gas appliances	incidental electrical wiring work in relation to disconnection and reconnection of type B gas appliances	
9	electrotechnology systems restricted permit	incidental electrical work under the supervision of a licensee with a licence in 1 or more of the following classes:
	(a)	restricted—electrotechnology systems assembly and servicing electrical fitting
	(b)	restricted—electrotechnology systems mechanical fitting
	(c)	restricted—electrotechnology systems plumbing and gas fitting
	(d)	restricted— electrotechnology systems refrigeration and air conditioning
	(e)	restricted—electrotechnology systems type B gas appliances	

Part 1.7	Gasfitters

column 1
item	column 2
construction occupation class	column 3
construction work	
1	advanced	gasfitting work, other than LP gas (liquid phase) installation, without supervision	
2	general	1	gasfitting work for pressures below 21kPa without supervision
2	gasfitting work for pressures above 21kPa under the supervision of an advanced gasfitter	
3	journeyperson gasfitter	gasfitting work under the general supervision of a licensee with an advanced gasfitters licence or unrestricted licence	
4	LPG gasfitter (vapour phase)	LP gas (vapour phase) installation without supervision	
5	LPG gasfitter (liquid phase)	LP gas (liquid phase) installation without supervision	
6	restricted automotive—LPG	LP gas fuel installation on motor vehicles	
7	restricted automotive—NGV	NGV fuel installation on motor vehicles	
8	restricted automotive—LPG forklifts	gasfitting for LPG forklifts	
9	restricted automotive—NGV forklifts	gasfitting for NGV forklifts	

Part 1.7A	Gas appliance worker

column 1
item	column 2
construction occupation class	column 3
construction work	
1	unrestricted type A	type A gas appliance work without supervision	
2	restricted type B	type A gas appliance work under the supervision of a licensee with an unrestricted type A licence	
3	unrestricted type B	type B gas appliance work without supervision	
4	restricted 
type B–level 2		(a)	without supervision—type B gas appliance work on—
	(i)	an atmospheric type gas appliance that consumes less than 2000MJ/h; or
	(ii)	a forced draft burner system that consumes less than 500MJ/h; and
	(b)	under the supervision of a licensee with an unrestricted type B licence—any other type B gas appliance work	
5	restricted 
type B–level 1	type B gas appliance work under the supervision of a licensee with—
	(a)	an unrestricted type B licence; or
	(b)	a restricted type B–level 2 licence that authorises the licensee to perform the work to be completed unsupervised	

Part 1.8	Plumbers

column 1
item	column 2
construction occupation class	column 3
construction work	
1	sanitary plumber	sanitary plumbing work without supervision	
2	water supply plumber	water supply plumbing work including fire sprinkler work for class 1 and 2 buildings in relation to pipework of 25mm diameter or less, but not including backflow prevention device test work within the meaning of section 31	
3	irrigation plumber	installation of irrigation networks and related equipment	
4	journeyperson plumber	sanitary plumbing work under supervision of licensee with sanitary plumbers licence	
5	fire sprinkler fitter	fire sprinkler work and work on a fire hydrant or fire hose connection point
	
6	journeyperson fire sprinkler fitter	fire sprinkler work, and work on a fire hydrant or fire hose connection point, under supervision of licensee with fire sprinkler fitter licence	

Part 1.9	Works assessors

column 1
item	column 2
construction occupation class	column 3
construction work	
1	Class A works assessor—planning and development	undertaking an exemption assessment under the Planning and Development Act 2007	
2	Class B works assessor—planning and development	undertaking an exemption assessment under the Planning and Development Act 2007, in relation to the following:
	(a)	site work under the Building Act 2004 for a class 1 building or class 10 building or structure;
	(b)	development in relation to a class 1 building or class 10 building or structure, mentioned in the Planning and Development Regulation 2008, schedule 1, other than the following:
	(i)	division 1.3.6;
	(ii)	section 1.102 and section 1.103;
	(iii)	section 1.105 to section 1.112	
3	works assessor—unit titles	providing, including doing anything incidental to providing, a unit tiles assessment report under the Unit Titles Act 2001	

Schedule 2	Demerit grounds for occupational discipline
(see s 43)
Part 2.1	Builders licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.1.1	fail to comply with building code, vol 1, cl BP1.1 or vol 2, cl P2.1 in that building did not resist actions reasonably subject to—local damage not minimised as demonstrated by deformation in single element of brickwork, blockwork, or stonework, laid in mortar causing crack or split in joint if—
	(a)	crack or split wider than 3mm; or
	(b)	face of element on either side of crack or split out of alignment with opposite face across crack or joint by more than 3mm	creation of defective single masonry element—cracked or split more than 3mm	1	
2.1.2	fail to comply with building code, vol 1, cl BP1.1 or vol 2, cl P2.1 in that building did not resist actions reasonably subject to—local damage not minimised as demonstrated by deformation in single element concrete floor or structural concrete element causing crack or split in joint if—
	(a)	crack or split wider than 5mm; or
	(b)	face of element on either side of crack or split out of alignment with opposite face across crack or joint by more than 5mm	creation of defective single concrete element—cracked or split more than 5mm	1	
2.1.3	fail to comply with building code, vol 1, cl BP1.1 or vol 2, cl P2.1 in that building did not resist actions reasonably subject to—local damage not minimised as demonstrated by deformation in wall, wall render, wall lining, wall tiling, ceiling lining or cornice causing crack or split in joint	creation of defective wall or wall render, lining or tiling, or ceiling lining or cornice—cracked or split	1	
2.1.4	fail to comply with building code, vol 1, cl BP1.1 or vol 2, cl P2.1 in that building did not resist actions reasonably subject to—local damage not minimised as demonstrated by possibility of instability or collapse of primary building element susceptible to termite attack because not provided with code-compliant termite risk management system	failure to protect primary building element with compliant termite management system	2	
2.1.5	fail to comply with building code, vol 1, cl FP1.2, FP1.3 (b), FP1.4, FP1.5, FP1.6 or vol 2, cl P2.1(b), P2.2.1(c)(ii), P2.2.2, P2.2.3—surface water, water or dampness could occur in building other than under code	failure to protect a building from water or dampness	3	
2.1.6	fail to comply with building code, vol 1, cl FP1.1 or vol 2, cl P2.2.1(a)—surface water collected or concentrated by building not disposed of in code-compliant way that avoids damage or nuisance to another property, or likelihood of damage or nuisance	creation of building with defective surface water collection or concentration disposal that damaged or caused nuisance or likelihood of either to other property	2	
2.1.7	fail to comply with building code, vol 1, cl FP1.3 or vol 2, cl P2.2.1(c)—drainage system for disposal of surface water did not, in code-compliant way—
	(a)	carry water to appropriate outfall; or
	(b)	avoid entry of water to building; or
	(c)	avoid water damaging building	creation of building with defective drainage system—failure to carry water to appropriate outfall, avoid entry of water to building or avoid water damaging building	3	
2.1.8	fail to comply with building code, vol 1, cl EP2.1 or vol 2, cl P2.3.2—building without code-compliant automatic warning on smoke detection	creation of building without effective smoke alarm	3	
2.1.9	fail to comply with building code, vol 1, cl FP1.7 or vol 2, cl P2.4.1—water not stopped from penetrating behind fittings, linings or concealed spaces of sanitary facilities, bathrooms, laundries and other wet area facilities	creation of building with defective wet area waterproofing or water containment	3	
2.1.10	fail to comply with building code, vol 1, cl FP3.1 or vol 2, cl P2.4.2—height of room or other space more than 50mm less than code requires	creation of building with ceiling height more than 50mm too low	3	
2.1.11	fail to comply with building code, vol 1, cl FP5.1 to FP5.4 or vol 2, cl P2.4.6—floor, wall or floor or wall penetration do not comply with code sound transmission and insulation requirements	creation of building with defective sound transmission or insulation arrangements	2	
2.1.12	fail to comply with building code, vol 1, cl DP2(c)(v) or vol 2, cl P2.5.1(b)(iii)—geometry of stairway risers or goings do not satisfy code safe passage requirements	creation of unsafe step or stairway	3	
2.1.13	fail to comply with building code, vol 1, cl DP3 or vol 2, cl P2.5.2—barrier required under code to prevent people falling not provided	creation of building with defective or no safety barrier	3	
2.1.14	fail to comply with building code, vol 1, cl GP1.2 or vol 2, cl P2.5.3—swimming pool over 300mm deep without code compliant safety barrier	creation of swimming pool with defective or no safety barrier	3	
2.1.15	fail to comply with building code, vol 1, cl CP2 or vol 2, cl P2.3.1—building with element that does not comply with code to avoid spread of fire to exit, sole occupancy unit or public area or between buildings or in building	creation of building with defective or no fire spread avoidance measures	2	
2.1.16	fail to comply with Building Act 2004, s 37A (2)—carried out or supervised building work without displaying sign	carrying out or supervising building work without displaying sign 	1	
2.1.17	fail to comply with Building Act 2004, s 37A (5)—carried out or supervised building work without replacing or repairing damaged sign within 2 days or prescribed period	carrying out or supervising building work without replacing or repairing damaged sign within 2 days or prescribed period	1	
2.1.18	fail to comply with Building Act 2004, s 42 (1) (c)—mortar joint in mortar-jointed masonry element not between 8mm and 12mm wide or bed joint not horizontal	creation of defective masonry joint—mortar joint not between 8mm and 12mm wide or bed joint not horizontal	1	
2.1.19	fail to comply with Building Act 2004, s 42 (1) (c)—beam, doorway, window, wall, column, post or truss erected out of plumb	creation of out of plumb beam, doorway, window, wall, column, post or truss	1	
2.1.20	fail to comply with Building Act 2004, s 42 (1) (c)—floor, ceiling, beam or sill erected out of horizontal	creation of out of horizontal floor, ceiling, beam or sill	1	
2.1.21	fail to comply with Building Act 2004, s 42 (1) (c)—floor, ceiling or beam erected so surface not flat	creation of floor, ceiling or beam without flat surface	1	
2.1.22	fail to comply with Building Act 2004, s 42 (1) (d)—building erected more than 100mm but less than 300mm away from position relative to boundaries indicated on approved plans	failure to comply with building siting on approved plan by more than 100mm but less than 300mm	2	
2.1.23	fail to comply with Building Act 2004, s 42 (1) (d)—building erected 300mm or more away from position relative to boundaries indicated on approved plans	failure to comply with building siting on approved plan by 300mm or more	3	
2.1.24	fail to comply with Building Act 2004, s 42 (1) (d)—part of floor erected more than 100mm higher or lower than level indicated on approved plans	failure to comply with floor level on approved plan by more than 100mm	2	
2.1.25	fail to comply with Building Act 2004, s 42 (1) (d)—top of building erected more than 300mm higher than height indicated on approved plans	failure to comply with building height requirements of approved plan by more than 300mm	2	
2.1.26	fail to comply with Building Act 2004, s 42 (1) (d)—location of structural element, wall, window or door, relative to building erected more than 100mm away from position on building indicated on approved plans or in position where plans indicate other element to be erected	failure to comply with set out requirements of approved plan for structural element, wall, window or door by more than 100mm, or inclusion of unplanned structural element, wall, window or door	1	
2.1.27	fail to comply with Building Act 2004, s 42 (1) (d)—lineal dimensions of window, door or doorway erected more than 100mm larger or smaller than lineal dimension of window, door or doorway indicated on approved plans	failure to comply with dimensional requirements of approved plan for window, door or doorway by more than 100mm	1	
2.1.28	fail to comply with Building Act 2004, s 42 (1) (d)—beam, doorway, window, wall, column, post or truss in approved plan not erected	failure to include significant building element from approved plan	2	
2.1.29	fail to comply with Building Act 2004, s 42 (1) (e)—carried out building work when not builder in commencement notice and not under supervision of builder in notice	carrying out building work when not in commencement notice or supervised by notice builder	2	
2.1.30	fail to comply with Building Act 2004, s 43 (2)—proceeded with building work above dampcourse level although certifier has not received required document or is not satisfied that position of building or level of all floors comply with approved plan and any condition	failure to provide survey plan or document or comply with approved plan or condition before building above dampcourse	2	
2.1.31	fail to comply with Building Act 2004, s 43 (3)—proceeded beyond stage of building work without giving written notice to certifier or without certifier’s written permission to proceed	failure to give written notice to certifier about reaching inspection stage or obtain written permission before proceeding	2	
2.1.32	fail to comply with Building Act 2004, s 64—did not comply with stop notice	failure to comply with stop notice	2	
2.1.33	fail to comply with Building Act 2004, s 64—did not comply with notice to produce survey plan	failure to comply with notice to provide survey plan	2	

Part 2.2	Building surveyors licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.2.1	fail to comply with Building Act 2004, s 24, s 28A (4) or s 37 (6)—certifier failed to give registrar required notice	failure to notify registrar as required under Building Act 2004	1	
2.2.2	fail to comply with Building Act 2004, s 28—certifier failed to issue building approval when should have, or issued building approval when no grounds to issue	failure to issue required building approval, or issue of unauthorised building approval	2	
2.2.3	fail to comply with Building Act 2004, s 28A (1) or (2)—certifier issued building approval that was not, or not entirely—
	(a)	marked on, attached to, or partly marked on and partly attached to, plans in relation to which approval was issued; or
	(b)	marked on plans and certifier did not indicate on plans that approval, or part of approval, in separate document	failure to mark, attach or annotate building approval required detail on approved plan	1	
2.2.4	fail to comply with Building Act 2004, s 30—certifier issued building approval that allowed building work that would contravene law because of external design or siting of building	issuing improper building approval—building work would contravene law because of external design or siting	3	
2.2.5	fail to comply with Building Act 2004, s 37 (5)—certifier failed to issue building commencement notice as required	failure to issue building commencement notice as required	2	
2.2.6	fail to comply with Building Act 2004, s 44 (1)—received notice that licensee reached stage of building work but did not inspect the building work as soon as practicable	failure to do required inspection as soon as practicable after receiving notification about it	2	
2.2.7	fail to comply with Building Act 2004, s 44 (2) (a)—certifier satisfied that building work not compliant with Building Act 2004, s 42, but did not give licensee in charge of building work written notice in accordance with s 44 (2) (a)	failure to give written notice in accordance with Building Act 2004, s 44 (2) (a)	2	
2.2.8	fail to comply with Building Act 2004, s 44 (2) (b)—building work complied with Building Act 2004, s 42, but certifier did not certify compliant or give certificate of compliance to licensee in charge of work	failure to give certificate of compliance after finding compliant work during required inspection	2	
2.2.9	fail to comply with Building Act 2004, s 50—certifier failed to notify registrar of contravention of building approval or development approval in accordance with s 50	failure to notify registrar of known contravention of building approval or development approval	2	
2.2.10	fail to comply with Unit Titles Act 2001, s 22B (3) (b)—fail to give copy of unit title assessment report to planning and land authority within 5 working days after giving report to applicant	failure to give copy of report to authority within 5 working days after giving report to applicant	1	

Part 2.3	Drainers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.3.1	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (a)—sanitary drainage system designed, constructed or installed in way that failed to convey sewage from sanitary plumbing system to approved disposal system or in manner that creates undue noise	creation of sanitary drainage system that fails to convey sewage from sanitary plumbing system to approved disposal system or in way that creates undue noise 	1	
2.3.2	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (b)—sanitary drainage system designed, constructed or installed in way that failed to avoid likelihood of blockage or leakage	creation of sanitary drainage system with likelihood of blockage or leakage	1	
2.3.3	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (c)—sanitary drainage system designed, constructed or installed in way that failed to avoid likelihood of root penetration	creation of sanitary drainage system with likelihood of root penetration	1	
2.3.4	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (d)—sanitary drainage system designed, constructed or installed in way that failed to provide adequate access for maintenance or clearing blockages	creation of sanitary drainage system without adequate access for maintenance or clearing blockages	1	
2.3.5	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (e)—sanitary drainage system designed, constructed or installed in way that failed to provide ventilation to avoid likelihood of foul air or gases accumulating in the sanitary drainage system or sewerage system	creation of sanitary drainage system without adequate ventilation of foul air or gases	1	
2.3.6	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (f)—sanitary drainage system designed, constructed or installed in way that failed to avoid likelihood of damage from superimposed loads or ground movement	creation of sanitary drainage system with likelihood of damage from loads or ground movement	1	
2.3.7	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (h)—sanitary drainage system designed, constructed or installed in way that failed to protect against internal contamination 	creation of sanitary drainage system without protection from contamination	1	
2.3.8	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (i)—sanitary drainage system designed, constructed or installed in way that failed to avoid likelihood of ingress of surface water, sub-surface water or stormwater into sewerage system	creation of sanitary drainage system with likelihood of allowing entry of surface water, sub‑surface water or stormwater into sewerage system	1	
2.3.9	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP2.1 (k) or (l)—sanitary drainage system designed, constructed or installed in way that failed to avoid likelihood of damage to existing buildings, site works, the sewerage system or other approved disposal system	creation of sanitary drainage system with likelihood of damaging existing building, site works, sewerage system or other approved disposal system	1	
2.3.10	fail to comply with Water and Sewerage Act 2000, s 16—provided sanitary drainage service without giving required notice	failure to give required notice of intention to start or completion of sanitary drainage work	1	
2.3.11	fail to comply with Water and Sewerage Regulation 2001, s 7 (1)—did work on sanitary drainage system other than in accordance with approved plan	creation of sanitary drainage work other than in accordance with approved plan	1	
2.3.12	fail to comply with Water and Sewerage Regulation 2001, s 8—
	(a)	did not tell registrar when sanitary drainage work ready for inspection; or
	(b)	did not leave sanitary drainage work ready for inspection as required	failure to tell registrar sanitary drainage work ready for inspection or to leave work uncovered for test	1	
2.3.13	fail to comply with Water and Sewerage Regulation 2001, s 9 (1)—did not test sanitary drain in accordance with AS/NZS 3500 before it was to be passed by an inspector or, if the sanitary drain was altered or repaired, before the alteration or repair was to be passed	failure to test sanitary drain before inspection	1	
2.3.14	fail to comply with Water and Sewerage Regulation 2001, s 9 (3)—did not rectify sanitary drainage work found to be defective	failure to rectify defective sanitary drainage work found by test	2	
2.3.15	fail to comply with Water and Sewerage Regulation 2001, s 10—did not give registrar required information, evidence of fee payment and plan within required time for sanitary drainage work completed in accordance with the plumbing code	failure to give required information, fee payment evidence and plan for completed sanitary drainage work	1	

Part 2.4	Electricians licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.4.1	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (a) (i)—inadequate or no protection (eg insulation and enclosure) against direct contact with live parts	inadequate or no protection against direct contact with live parts	3	
2.4.2	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (a) (ii)—inadequate or no protection (eg double insulation or isolating transformers) against indirect contact with exposed conductive parts	inadequate or no protection against indirect contact with exposed conductive parts	2	
2.4.3	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (a) (iii)—inadequate or no protection (eg enclosure, guarding or screening) against hazardous parts (eg flammable materials, hot surfaces or parts that may cause physical injury)	inadequate or no protection against hazardous parts	3	
2.4.4	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (a) (iv)—inadequate or no protection (eg unimpaired fire barriers) against spread of fire	inadequate or no protection against fire spread	1	
2.4.5	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (a) (v)—electrical equipment in poor general condition (eg signs of damage that could impair safe operation, failure to disconnect unused electrical equipment)	creation of electrical equipment in poor general condition	1	
2.4.6	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (b) (i)—noncompliant consumer mains current carrying capacity	creation of consumer mains with noncompliant current carrying capacity	2	
2.4.7	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (b) (ii)—noncompliant consumer mains voltage drop	creation of consumer mains with noncompliant voltage drop	1	
2.4.8	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (b) (iii)—noncompliant consumer mains underground installation condition	creation of consumer mains with noncompliant underground installation condition	3	
2.4.9	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (b) (iv)—noncompliant consumer mains aerial installation condition	creation of consumer mains with noncompliant aerial installation condition	3	
2.4.10	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (b) (v)—noncompliant consumer mains wiring connection	creation of consumer mains with noncompliant wiring connection	3	
2.4.11	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (b) (vi)—inadequate or no protection of consumer mains against external influences	failure to protect consumer mains against external influence	1	
2.4.12	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (c) (i)—noncompliant switchboard location (eg access or egress)	creation of switchboard in noncompliant location	2	
2.4.13	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (c) (ii)—switchboard protective device defect (eg overload and residual current rating, fault current rating)	creation of switchboard with protective device defect	3	
2.4.14	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (c) (iii)—switchboard isolating device defect (eg main switch)	creation of switchboard with isolating device defect	3	
2.4.15	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (c) (iv)—switchboard connecting device defect (eg neutral bars, earth bars or active link)	creation of switchboard with connective device defect	3	
2.4.16	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (c) (v)—switchboard connection defect or fixing of switchboard wiring and switchgear defect	creation of switchboard with connection defect or fixing of wiring or switchgear defect	3	
2.4.17	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (c) (vi)—switchboard identification defect or labelling of switchboard electrical equipment defect	creation of switchboard with labelling identification defect or labelling electrical equipment defect	1	
2.4.18	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (c) (vii)—inadequate or no protection of switchboard against external influences	failure to protect switchboard against external influences	3	
2.4.19	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (d) (i)—conductor size of wiring systems defect (eg current-carrying capacity or voltage drop)	creation of wiring system with conductor size defect	3	
2.4.20	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (d) (ii)—inadequate or no identification of cable core	creation of wiring system with cable core identification defect	1	
2.4.21	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (d) (iii)—inadequate or no support or fixing of wiring systems	creation of wiring system with inadequate or no support or fixing	1	
2.4.22	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (d) (iv)—connection or enclosure of wiring system defective	creation of wiring system with connection or enclosure defect	2	
2.4.23	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (d) (v)—noncompliant installation of wiring system with installation condition (eg underground, aerial, emergency system)	creation of wiring system with installation condition in noncompliant way	3	
2.4.24	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (d) (vi)—inadequate or no segregation of wiring system from other services and electrical installations	creation of wiring system with defective segregation from another service or electrical installation	3	
2.4.25	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (d) (vii)—inadequate or no protection of wiring system against external influences (eg enclosure)	failure to protect wiring system against external influence	1	
2.4.26	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (e) (i)—electrical equipment with isolation or switching devices not protected against injury from mechanical movement devices or motors	creation of electrical equipment with defect in isolation or switching device for protection against injury from mechanical movement device or motor	3	
2.4.27	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (e) (ii)—electrical equipment with isolation or switching devices not protected against thermal effects (eg motors, room heaters, water heaters)	creation of electrical equipment with defect in isolation or switching device for protection against injury from thermal effect	2	
2.4.28	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (e) (iii)—particular electrical equipment switching devices noncompliant (eg socket-outlets, cooking appliances)	creation of electrical equipment switching device noncompliant for particular electrical equipment 	2	
2.4.29	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (e) (iv)—electrical equipment switching devices noncompliant for use in installation conditions (eg locations affected by water, explosive atmospheres, extra-low voltage, high voltage)	creation of electrical equipment switching device noncompliant in conditions	3	
2.4.30	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (e) (v)—electrical equipment noncompliant with required Australian Standard	creation of electrical equipment noncompliant with Australian Standard	3	
2.4.31	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (e) (vi)—electrical equipment connection, support or fixing defect	creation of electrical equipment with connection, support or fixing defect	2	
2.4.32	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (e) (vii)—inadequate or no protection of electrical equipment against external influences	failure to protect electrical equipment against external influence	2	
2.4.33	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (i)—MEN connection defect	creation of defective MEN connection 	3	
2.4.34	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (ii)—earth electrode defect	creation of defective earth electrode	3	
2.4.35	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (iii)—earthing conductor defect (eg size, identification)	creation of defective earthing conductor	3	
2.4.36	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (iv)—equipotential bonding conductor defect (eg size, identification)	creation of defective equipotential bonding conductor	3	
2.4.37	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (v)—earthing connection, joint or termination defect	creation of defective earthing connection, joint or termination	3	
2.4.38	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (vi)—inadequate or no protection of earthing connection against external influences	failure to adequately protect earthing connection against external influence	2	
2.4.39	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (vii)—noncompliant connection of earthing to earthing arrangements for another system	creation of earthing with noncompliant connection to earthing arrangements of another system	3	
2.4.40	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 2.2 (f) (viii)—earthing situation required earthing of additional electrical equipment	creation of noncompliant earthing requiring earthing of additional electrical equipment	3	
2.4.41	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 3.1—earthing system failed earth continuity and resistance test under AS 3017	creation of earthing system that failed earth continuity and resistance test under AS 3017	3	
2.4.42	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 3.2—wiring or installation with inadequate or no insulation resistance between all live parts, including live conductors and the electrical installation earth, and each live conductor of consumer mains and submains	creation of wiring or installation that failed insulation resistance test under AS 3017	3	
2.4.43	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 3.3—wiring or installation with defective polarity of active, neutral or earthing conductors	creation of wiring or installation that failed polarity test under AS 3017	3	
2.4.44	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 3.4—wiring or installation with defective circuit connections	creation of wiring or installation that failed correct circuit connections test under AS 3017	3	
2.4.45	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 3.5—wiring or installation with defective fault-loop impedance	creation of wiring or installation that failed fault-loop impedance test under AS 3017	3	
2.4.46	fail to comply with Electricity Safety Act 1971, s 5, compliance with AS 3000, as indicated by testing under AS 3017, cl 3.6—wiring or installation with defective residual current device (RCD) operation	creation of wiring or installation that failed RCD test under AS 3017	3	
2.4.47	fail to comply with Electricity Safety Act 1971, s 6—did not ensure electrical wiring work tested under AS 3017 or did not give registrar or owner of installation required report about test	failure to test installation or give required test report	2	
2.4.48	fail to comply with Electricity Safety Act 1971, s 8 (4)—contravention of direction under Electricity Safety Act, s 8 (2) to take stated action to make installation or work safe and compliant	failure to comply with direction to make installation or work safe	3	
2.4.49	fail to comply with Electricity Safety Act 1971, s 12 or s 13—prescribed article of electrical equipment installed in, or connected to, electrical installation in stated circumstances	creation of connection to unapproved electrical appliance	3	

Part 2.5	Gasfitters licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.5.1	fail to comply with Gas Safety Act 2000, s 8 requiring work to be done under AS 5601, cl 2.5.2—provided outlet not connected to gas appliance and not sealed with plug, cap or blank flange	failure to appropriately seal surplus gas outlet 	3	
2.5.2	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cls 3.2.1 and 3.3.6—material used to join components of consumer piping system, or to connect to consumer piping system, with incompatible mating screw threads or noncompliant joint	creation of noncompliant joint in, or connection to, consumer piping system	1	
2.5.3	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cls 4.1.3, 4.3.1 (c) and 4.4—material of consumer piping system, or connecting to consumer piping system, not adequately protected from corrosion or isolated from incompatible material	creation of part of consumer piping system, or connection to it, without compliant corrosion protection or isolation between incompatible material	2	
2.5.4	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.1.12—pipework forming part of consumer piping system required to have compliant markings and did not have them	failure to adequately identify gas pipework	1	
2.5.5	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.2.4—pipework forming part of consumer piping system with diameter too small to achieve required available gas pressure	creation of part of consumer piping system with noncompliant pipework size	3	
2.5.6	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.3—inadequate spacing or strength of devices supporting or restraining, or intended to support or restrain, consumer piping system	failure to adequately support or restrain gas pipework	1	
2.5.7	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.6—part of piping system required to have adequate pressure protection device	creation of consumer piping system with defective gas pressure protection	3	
2.5.8	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.7—gas vent located in noncompliant position, or so could discharge gas in prohibited way, or no required gas vent provided	creation of noncompliant gas vent discharge point or failure to provide required gas vent	2	
2.5.9	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cls 4.8.2 and 4.8.3—gas hose assembly connection point located—
	(a)	in bedroom, bathroom, sauna, toilet or hallway; or
	(b)	in place where traffic across hose; or
	(c)	if used for space heater—1m or less from doorway	creation of gas hose assembly connection in noncompliant location	1	
2.5.10	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.9.2—quick-connect type gas connection point installed outside in way that possible for rainwater and debris to enter it	creation of quick-connect gas device outside with likelihood of entry of water or debris	1	
2.5.11	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.11.3—part of consumer piping system located less than 25mm from metal electrical conduit, metal-armoured or metal-sheathed electrical wire or cable, or electrical earthing electrode	creation of part of gas pipework less than 25mm from electrical installation	1	
2.5.12	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 4.11.11—part of consumer piping system exposed to potential liquid discharge (eg from water heater relief valve or condensate drain)	creation of part of gas pipework exposed to liquid discharge	1	
2.5.13	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cls 5.2.4, 5.3.1 and 5.4—
	(a)	gas appliance’s ventilation inadequate to ensure appliance’s safe operation; or
	(b)	possibility that operation of ventilation system, air distribution system or air blower could deprive gas appliance of air required for combustion or caused air pressure to be less than atmospheric pressure at appliance or otherwise adversely affected appliance’s operation; or

	(c)	gas appliance installed at location without adequate ventilation for complete combustion of gas, proper fluing or maintenance of ambient temperature of immediate surrounds at safe level, under normal operating conditions; or
	(d)	air supply to gas appliance contaminated with gases produced by fuel combustion, or contained chemicals or flammable vapours that could have affected combustion; or
	(e)	gas appliance in room or enclosure required to have 1 or more of following, but did not:
	(i)	natural ventilation direct from outside the room or enclosure;
	(ii)	natural ventilation from nearby room or enclosure;
	(iii)	mechanical ventilation	failure to provide gas appliance with compliant air ventilation or adequate combustion air supply	2	
2.5.14	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.2.5—gas appliance installed other than in accordance with manufacturer’s instructions	creation of gas appliance installation not in accordance with manufacturer’s instructions	2	
2.5.15	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.2.6—gas appliance installed but failure to install component or install in compliant way may have affected safe operation	creation of potentially unsafe gas appliance installation	3	
2.5.16	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cls 5.2.7, 5.3.4 and 5.12—gas appliance installed so that—
	(a)	surface temperature of nearby combustible surface could exceed 65˚C above ambient temperature because of use of appliance; or
	(b)	appliance is hazard to walls, nearby surfaces, curtains, furniture or opened door; or
	(c)	clearance from appliance, including any flue, to anything else less than required	creation of gas appliance installation too close to combustible surface or other hazardous thing	3	
2.5.17	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cls 5.2.13, 5.2.15, 5.2.18, 5.2.19 and 5.12—gas appliance installed—
	(a)	so that supported on, or secured to, structure that not durable, or otherwise inappropriate; or
	(b)	so that supported or secured in way that does not minimise strain on any gas pipe connection; or
	(c)	so that not secured or stabilised in way suitable for its conditions of use or in accordance with manufacturer’s instruction (eg upright stove not prevented from tilting when oven door open and lent on; or
	(d)	but not restrained, or restrained in noncompliant way if required to be restrained against rolling on wheels, rollers or castors	creation of gas appliance with noncompliant support, security, restraint or stability	2	
2.5.18	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.3.11 (c) and (d)—gas appliance in roof space not provided with compliant access walkway—
	(a)	of required dimensions from point of access into roof space to gas appliance and around appliance; and
	(b)	with no duct intruding on it; and
	(c)	capable of supporting person’s weight; and
	(d)	permanently fixed to building	failure to provide compliant walkway to roof space gas appliance	3	
2.5.19	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.3.11 (f)—gas appliance in roof space without required artificial lighting or lighting switch located adjacent to, and within 600mm from closest edge of, access opening into roof space	failure to provide required compliant artificial light to roof-space gas appliance	2	
2.5.20	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.3.11 (c) and (g)—roof-space gas appliance located so that cannot be readily lit or serviced, or so that components cannot be removed	creation of defective roof-space gas appliance installation—not readily lit or serviced, parts cannot be removed	2	
2.5.21	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.3.11 (e)—roof-space gas appliance required to be installed in stated way on non-combustible platform or on combustible platform with compliant heat shielding was not installed that way	creation of roof-space gas appliance with platform inadequately protected from combustion	3	
2.5.22	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.6—thing connected to consumer piping system did not have required compliant device to allow thing to be isolated or disconnected from gas supply	failure to provide required compliant way to disconnect or isolate gas supply	1	
2.5.23	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.11—gas appliance installed without required automatic gas shut-off if operation of overhead automatic
fire-extinguishing equipment might extinguish appliance’s flame	creation of gas appliance installation without automatic gas shut-off on automatic fire extinguishing	3	
2.5.24	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl 5.13—gas appliance with flue made of noncompliant material or configured, located or supported in noncompliant way 	creation of gas appliance installation with noncompliant flue	3	
2.5.25	fail to comply with Gas Safety Act 2000, s 8, requiring work to be done under AS 5601, cl E3.2.1—consumer piping system gas pressure dropped or gas leaked more than allowed	creation of consumer piping system or connection that leaked gas or dropped gas pressure	3	
2.5.26	fail to comply with Gas Safety Act 2000, s 9 (1)—gasfitting work completed in accordance with Gas Safety Act 2000, s 8, but certificate of compliance for work not given in accordance with Gas Safety Act 2000	failure to give appropriate certificate of compliance for pipework	3	
2.5.27	fail to comply with Gas Safety Act 2000, s 23 (2)—gas appliance that not approved connected to consumer piping system	connection of unapproved appliance to consumer piping system	3	

Part 2.6	Plumbers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.6.1	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP1.1 (b)—sanitary plumbing system designed, constructed or installed in way that failed to avoid likelihood of loss of amenity because of blockage or leakage	creation of sanitary plumbing system with likelihood of loss of amenity because of blockage or leakage	2	
2.6.2	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP1.1 (c)—sanitary plumbing system designed, constructed or installed in way that failed to avoid likelihood of ingress of inappropriate water, sewage, sullage, foul air or gases from the system into a building	creation of sanitary plumbing system with likelihood of inappropriate water, sewage, sullage, foul air or gas entering a building	2	
2.6.3	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP1.1 (d)—sanitary plumbing system designed, constructed or installed in way that failed to provide adequate access for maintenance of mechanical components, operational controls or for clearing blockages	creation of sanitary plumbing system without adequate access for maintenance of mechanical components, operational controls or clearing blockages	1	
2.6.4	fail to comply with Water and Sewerage Regulation 2001, s 6 (1), performance requirement under plumbing code cl CP1.1 (e)—sanitary plumbing system designed, constructed or installed in way that failed to avoid likelihood of damage from superimposed loads, ground movement or root penetration	creation of sanitary plumbing system with likelihood of damage from loads, ground movement or root penetration	1	
2.6.5	fail to comply with Water and Sewerage Regulation 2001, s 18 (1), performance requirement under plumbing code cl B1.2 (a)—cold water service designed, constructed or installed in way that failed to avoid likelihood of contamination of drinking water within the water service or water network	creation of cold water service with likelihood of contamination of drinking water in cold water service or water network	2	
2.6.6	fail to comply with Water and Sewerage Regulation 2001, s 18 (1), performance requirement under plumbing code cl B1.2 (f)—cold water service designed, constructed or installed in way that failed to allow the system, appliances or backflow prevention devices to be isolated for testing or maintenance where required	creation of cold water service without allowance for system, appliances or backflow prevention devices to be isolated for testing or maintenance	2	
2.6.7	fail to comply with Water and Sewerage Regulation 2001, s 18 (1), performance requirement under plumbing code cl B1.2 (c)—cold water service designed, constructed or installed in way that failed to avoid likelihood of leakage or failure, including uncontrolled discharges	creation of cold water service with likelihood of leakage or failure	1	
2.6.8	fail to comply with Water and Sewerage Act 2000, s 11 or s 15 (1) (a) and Water and Sewerage Regulation 2001, s 17—
	(a)	installed or fitted sprinkler system or part of fire sprinkler service without giving required notice of start to registrar; or
	(b)	altered, repaired or replaced pipe or fitting communicating with water network without giving required notice (including required plumbing plan) of start to registrar or without required approval	failure to give required notice of intention to start sprinkler or fire sprinkler work or interfere with pipes communicating with water network	1	
2.6.9	fail to comply with Water and Sewerage Act 2000, s 15 (2) or (3)—
	(a)	contravened direction of registrar about how water supply plumbing service is to be provided; or
	(b)	installed a thing to which the plumbing code, part G applies and the thing was not certified under the part	failure to provide service as directed by registrar or installed thing not certified under plumbing code, part G	2	
2.6.10	fail to comply with Water and Sewerage Regulation 2001, s 19—
	(a)	did not tell registrar when water supply plumbing work ready for inspection; or
	(b)	did not leave water supply plumbing work ready for inspection as required	failure to tell registrar water supply plumbing work ready for inspection or to leave work uncovered for test	1	
2.6.11	fail to comply with Water and Sewerage Regulation 2001, s 20 (1)—did not test water supply plumbing in accordance with AS/NZS 3500 before it was to be passed by an inspector or, if the water supply plumbing was altered or repaired, before the alteration or repair was to be passed	failure to test water supply plumbing before inspection	1	
2.6.12	fail to comply with Water and Sewerage Regulation 2001, s 20 (3)—did not rectify water supply plumbing work found to be defective	failure to rectify defective water supply plumbing work found by test	2	
2.6.13	fail to comply with Water and Sewerage Regulation 2001, s 21—did not give registrar required information, evidence of fee payment and plan within required time for water supply plumbing work completed in accordance with the plumbing code	failure to give required information, fee payment evidence and plan for completed water supply plumbing work	1	
2.6.14	fail to comply with Water and Sewerage Regulation 2001, s 22 (4)—installed testable backflow prevention device but did not tell registrar about installation or ensure device tested as required as soon as practicable	installation of testable backflow prevention device without notifying or testing	1	
2.6.15	fail to comply with Water and Sewerage Act 2000, s 16—provided sanitary plumbing service without giving required notice	failure to give required notice of intention to start or complete sanitary plumbing work	1	
2.6.16	fail to comply with Water and Sewerage Regulation 2001, s 7 (1)—did work on sanitary plumbing system other than in accordance with approved plan	creation of sanitary plumbing work other than in accordance with approved plan	1	
2.6.17	fail to comply with Water and Sewerage Regulation 2001, s 8—
	(a)	did not tell registrar when sanitary plumbing work ready for inspection; or
	(b)	did not leave sanitary plumbing work ready for inspection as required	failure to tell registrar sanitary plumbing work ready for inspection or to leave work uncovered for test	1	
2.6.18	fail to comply with Water and Sewerage Regulation 2001, s 9 (1)—did not test sanitary plumbing in accordance with AS/NZS 3500 before it was to be passed by an inspector or, if the sanitary plumbing was altered or repaired, before the alteration or repair was to be passed	failure to test sanitary plumbing before inspection	1	
2.6.19	fail to comply with Water and Sewerage Regulation 2001, s 9 (3)—did not rectify sanitary plumbing work found to be defective	failure to rectify defective sanitary plumbing work found by test	2	
2.6.20	fail to comply with Water and Sewerage Regulation 2001, s 10—did not give registrar required information, evidence of fee payment and plan within required time for sanitary plumbing work completed in accordance with the plumbing code	failure to give required information, fee payment evidence and plan for completed sanitary plumbing work	1	

Part 2.7	Plumbing plan certifiers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.7.1	fail to comply with Water and Sewerage Act 2000, s 8 (1)—approved plumbing or sanitary drainage work plan without required approvals	failure to obtain required approval before approving plumbing or drainage plan	3	
2.7.2	fail to comply with Water and Sewerage Act 2000, s 8 (2) (e)—certifier issued plan approval for proposed plumbing or sanitary drainage work, or approved amendment plan, where design of work did not comply with the plumbing code	creation of plan approval or amendment for noncompliant plumbing or drainage work	2	
2.7.3	fail to comply with Water and Sewerage Act 2000, s 9 (2)—certifier approved amendment to plan approval for proposed plumbing or sanitary drainage work if reconsideration required	approved amended plan that required reconsideration	1	
2.7.4	fail to comply with Water and Sewerage Act 2000, s 9 (4)—certifier did not keep all documents relating to approved plumbing or drainage plan for at least 12 months	failure to keep plan approval records for 1 year	1	
2.7.5	fail to comply with Water and Sewerage Act 2000, s 10—certifier did not notify registrar within 7 days after end of appointment under Water and Sewerage Act, s 5 (3)	failure to notify loss of appointment as certifier within 7 days after loss	1	

Part 2.7A	Works assessor licence demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.7A.1	fail to comply with Unit Titles Act 2001, s 22B (3) (b)—fail to give copy of unit title assessment report to planning and land authority within 5 working days after giving report to applicant	failure to give copy of report to authority within 5 working days after giving report to applicant	1	

Part 2.8	All licences demerit grounds for occupational discipline—Act, s 55 (1) (a)

column 1
item	column 2
demerit grounds for occupational discipline	column 3
short description	column 4
demerit points	
2.8.1	fail to comply with Act, s 40—contravention of rectification order other than emergency rectification order	contravention of non-emergency rectification order	2	
2.8.2	fail to comply with Act, s 40—contravention of emergency rectification order	contravention of emergency rectification order	4	
2.8.3	fail to comply with Act, s 47—did not give client evidence of relevant insurance before providing construction service	failure to give client insurance evidence	1	
2.8.4	fail to comply with Act, s 87 (1)—contravention of licence condition that—
	(a)	limited number or cost of construction services provided under licence; or
	(b)	required licensee to do something in a stated way in connection with the performance of a construction service	failure to comply with licence condition	2	
2.8.5	fail to comply with Act, s 87 (3)—contravention of applicable code of practice	failure to comply with applicable code of practice	1	

Schedule 3	Licence demerit grounds for occupational discipline under Act, s 55 (1) (other than par (a))

(see s 43)

column 1
item	column 2
provision	column 3
short description	column 4
demerit points	
3.1	s 55 (1) (b)	giving false or misleading information	2	

Schedule 4	Reviewable decisions
(see pt 6A)

column 1
item	column 2
section	column 3
decision	column 4
entity	
1	Act, 19 (1)	refuse to issue licence	applicant for licence	
2	Act, 19 (1)	issue licence for period less than maximum period for which licence may be issued	applicant for licence	
3	Act, 19 (2)	issue licence other than licence applied for	applicant for licence	
4	Act, 21 (2)	amend licence by putting condition on licence, or amending or cancelling licence	licensee	
5	Act, 21 (2)	refuse to amend licence	licensee	
6	Act, 21A	amend licence by putting condition on licence	licensee	
7	Act, 22	refuse to endorse licence	licensee	
8	Act, 25	renew licence for period less than the maximum period for which licence may be renewed	applicant for renewal	
9	Act, 25 (2) or (3)	refuse to renew licence	person whose licence renewal refused	
10	Act, 26	refuse to cancel licence	licensee	
11	Act, 29	refuse to approve resignation of nominee of corporation or partnership	nominee, corporation or partnership
	
12	Act, 37	authorise licensee to enter land 	entity given notice under s 34 in relation to land or licensee	
13	Act, 38	make rectification order	entity to which rectification order relates	
14	Act, 53	refuse to revoke automatic suspension	licensee	
15	Act, 56 (1) (b), (c) or (d)	take disciplinary action	licensee	
16	Act, 59 (2)	suspend licence	licensee	
17	Act, 61 (2)	refuse to revoke suspension	licensee	
18	Act, 95	take disciplinary action	licensee	
19	Act, 96	refuse application for licence or renewal	applicant for licence or renewal	
20	Act, 97	give notice of licence suspension without opportunity to make representations 	person whose licence suspended	
21	Act, 98	give notice of licence disqualification without opportunity to make representations 	person whose licence disqualified	
22	Act, 107 (5)	refuse to give access to information on register	person asking for access to information	
23	Act, 109 (3)	include details of contravention in register	entity to which details of contravention relate	
24	Act, 111	refuse to remove information from the register	entity to which information relates	
25	30	refuse to endorse builders licence	licensee or applicant for endorsement	
26	30	endorse builders licence subject to conditions	licensee	
27	31	refuse to endorse plumbers licence	licensee	
28	31A	refuse to endorse building assessor’s licence	licensee	
29	Act, s 31B	refuse to endorse advanced gasfitters licence or general gasfitters licence	licensee	
30	31C	refuse to endorse electrical contractor licence or unrestricted electrician licence	licensee	
31	33	refuse to issue replacement licence	licensee	

Dictionary
(see s 2)
Note 1	The Legislation Act contains definitions and other provisions relevant to this regulation.
Note 2	For example, the Legislation Act, dictionary, pt 1, defines the following terms:
·	Act
·	found guilty
·	home address.
Note 3	Terms used in this regulation have the same meaning that they have in the Construction Occupations (Licensing) Act 2004 (see Legislation Act, s 148).  For example, the following terms are defined in the Construction Occupations (Licensing) Act 2004, dict:
·	AS 3500
·	building surveyor (see s 9)
·	disciplinary action
·	demerit disciplinary ground
·	endorsement
·	nominee
·	registrar
·	works assessor (see s 14A (1)).
AS 3000 means Australian/New Zealand Standard 3000 (Wiring Rules), as in force from time to time.
AS 3017 means Australian/New Zealand Standard 3017 (Electrical Installations—Testing and Inspection Guidelines), as in force from time to time.
AS 5601 means Australian Standard 5601 (Gas Installations), as in force from time to time.
basic building work—see the Building Act 2004, section 10.
building certification work—see the Act, section 9 (4) (What is a building surveyor?).
electrical installation—see the Electricity Safety Act 1971, dictionary.
electrical wiring work—see the Act, section 11 (3) (What is an electrician?).
fire sprinkler work—see the Water and Sewerage Act 2000, dictionary.
gasfitting work—see the Act, section 12 (3) (What is a gasfitter?).
incidental electrical work means work carried out by a person whose main occupation is not as an electrician if the work—
	(a)	either—
	(i)	involves the disconnection and reconnection of an appliance, or fitting, that is an electrical installation; or
	(ii)	involves finding and fixing faults in components of an appliance, or fitting, that is an electrical installation; and
	(b)	is incidental to the person’s main occupation; and
	(c)	does not include interval metering work.
interval metering work—see section 31C (3).
sanitary drainage work—see the Act, section 10 (3) (What is a drainer?).
sanitary plumbing work—see the Act, section 13 (3) (What is a plumber?).
specialist building work—see the Building Act 2004, section 9.
storey—see the Building Act 2004, dictionary.
type B gas appliance means a gas appliance that—
	(a)	consumes more than 10MJ/h of gas; and
	(b)	is not covered by an approval scheme for gas appliances recognised by an entity appointed by the government of a State or Territory to administer the gas safety legislation for the State or Territory.
unit title assessment report—see the Unit Titles Act 2001, section 22B.
water supply plumbing work—see the Act, section 13 (3) (What is a plumber?).

Endnotes
1	About the endnotes
Amending and modifying laws are annotated in the legislation history and the amendment history.  Current modifications are not included in the republished law but are set out in the endnotes.
Not all editorial amendments made under the Legislation Act 2001, part 11.3 are annotated in the amendment history.  Full details of any amendments can be obtained from the Parliamentary Counsel’s Office.
Uncommenced amending laws are not included in the republished law.  The details of these laws are underlined in the legislation history.  Uncommenced expiries are underlined in the legislation history and amendment history.
If all the provisions of the law have been renumbered, a table of renumbered provisions gives details of previous and current numbering.  
The endnotes also include a table of earlier republications.
2	Abbreviation key

A = Act	NI = Notifiable instrument	
AF = Approved form	o = order	
am = amended	om = omitted/repealed	
amdt = amendment	ord = ordinance	
AR = Assembly resolution	orig = original	
ch = chapter	par = paragraph/subparagraph	
CN = Commencement notice	pres = present	
def = definition	prev = previous	
DI = Disallowable instrument	(prev...) = previously	
dict = dictionary	pt = part	
disallowed = disallowed by the Legislative 	r = rule/subrule	
Assembly	reloc = relocated	
div = division	renum = renumbered	
exp = expires/expired	R[X] = Republication No	
Gaz = gazette	RI = reissue	
hdg = heading	s = section/subsection	
IA = Interpretation Act 1967	sch = schedule	
ins = inserted/added	sdiv = subdivision	
LA = Legislation Act 2001	SL = Subordinate law	
LR = legislation register	sub = substituted	
LRA = Legislation (Republication) Act 1996	underlining = whole or part not commenced	
mod = modified/modification	or to be expired	

3	Legislation history
This regulation was made as part of the Construction Occupations (Licensing) Act 2004 (see A2004‑12, s 151 and sch 1) and was originally the Construction Occupations (Licensing) Regulations 2004.  It was renamed under the Legislation Act 2001.
Construction Occupations (Licensing) Regulation 2004 SL2004-36
taken to have been notified LR 26 March 2004 (A2004‑12, s 151 (3) (a))
s 1 taken to have commenced 26 March 2004 (LA s 75 (1))
remainder commenced 1 September 2004 (A2004‑12, s 151 (3) (b))
as amended by
Construction Occupations (Licensing) Amendment Regulations 2004 (No 1) SL2004-44
notified LR 8 September 2004
s 1, s 2 commenced 8 September 2004 (LA s 75 (1))
remainder commenced 9 September 2004 (s 2)
Construction Occupations Legislation Amendment Act 2005 A2005‑34 sch 1 pt 1.4
notified LR 6 July 2005
s 1, s 2 commenced 6 July 2005 (LA s 75 (1))
sch 1 pt 1.4 commenced 27 July 2005 (s 2)
Construction Occupations (Licensing) Amendment Regulation 2005 (No 1) SL2005-18
notified LR 26 August 2005
s 1, s 2 commenced 26 August 2005 (LA s 75 (1))
remainder commenced 27 August 2005 (s 2)
Construction Occupations Legislation Amendment Act 2006 A2006‑15 sch 1 pt 1.3
notified LR 6 April 2006
s 1, s 2 commenced 6 April 2006 (LA s 75 (1))
sch 1 pt 1.3 commenced 1 September 2006 (s 2 and CN2006-19)
Asbestos Legislation Amendment Act 2006 A2006-16 sch 1 pt 1.5 (as am by A2006‑24 s 4)
notified LR 18 May 2006
s 1, s 2 commenced 18 May 2006 (LA s 75 (1))
amdt 1.39, amdt 1.44 commenced 18 November 2006 (s 2 (2) and LA s 79)
sch 1 pt 1.5 remainder commenced 1 July 2006 (s 2 (1) as am by A2006‑24 s 4))
Asbestos Legislation Amendment Act 2006 (No 2) A2006-24
notified LR 18 May 2006
s 1, s 2 commenced 18 May 2006 (LA s 75 (1))
remainder commenced 19 May 2006 (s 2)
Note	This Act only amends the Asbestos Legislation Amendment Act 2006 A2006-16.
Construction Occupations (Licensing) Amendment Regulation 2006 (No 1) SL2006-52
notified LR 4 December 2006
s 1, s 2 commenced 4 December 2006 (LA s 75 (1))
remainder commenced 5 December 2006 (s 2)
Training and Tertiary Education Legislation Amendment Act 2007 A2007-12 sch 1 pt 1.6
notified LR 13 June 2007
s 1, s 2 commenced 13 June 2007 (LA s 75 (1))
sch 1 pt 1.6 commenced 1 July 2007 (s 2 and CN2007-3)
Building Legislation Amendment Act 2007 A2007-26 sch 1 pt 1.4
notified LR 13 September 2007
s 1, s 2 commenced 13 September 2007 (LA s 75 (1))
sch 1 pt 1.4 commenced 31 March 2008 (s 2 (1) and see Planning and Development Act 2007 A2007-24, s 2 and CN2008-1)
ACT Civil and Administrative Tribunal Legislation Amendment Act 2008 A2008-36 sch 1 pt 1.11
notified LR 4 September 2008
s 1, s 2 commenced 4 September 2008 (LA s 75 (1))
sch 1 pt 1.11 commenced 2 February 2009 (s 2 (1) and see ACT Civil and Administrative Tribunal Act 2008 A2008-35, s 2 (1) and CN2009-2)
as modified by
ACT Civil and Administrative Tribunal (Transitional Provisions) Regulation 2009 SL2009-2 s 67 and sch 2 (as am by A2009‑49 amdt 1.2, amdt 1.4)
notified LR 29 January 2009
s 1, s 2 commenced 29 January 2009 (LA s 75 (1))
s 67 and sch 2 commenced 2 February 2009 (s 2 and see ACT Civil and Administrative Tribunal Act 2008 A2008-35, s 2 (1) and CN2009-2)
as amended by
Statute Law Amendment Act 2009 (No 2) A2009-49 amdt 1.2, amdt 1.4, sch 1 pt 1.5, sch 3 pt 3.11
notified LR 26 November 2009
s 1, s 2 commenced 26 November 2009 (LA s 75 (1))
amdt 1.2, amdt 1.4, sch 1 pt 1.5, sch 3 pt 3.11 commenced 17 December 2009 (s 2)
Note	This Act also amends the ACT Civil and Administrative Tribunal (Transitional Provisions) Regulation 2009 SL2009-2.
Statute Law Amendment Act 2010 A2010-18 sch 3 pt 3.2
notified LR 13 May 2010
s 1, s 2 commenced 13 May 2010 (LA s 75 (1))
sch 3 pt 3.2 commenced 3 June 2010 (s 2)
Construction Occupations Legislation (Exemption Assessment) Amendment Act 2010 A2010-24 pt 4
notified LR 8 July 2010
pt 1 commenced 8 July 2010 (s 2 (1))
s 42 commenced 8 July 2011 (s 2)
pt 4 remainder commenced 3 September 2010 (s 2 (2) and see Construction Occupations Legislation Amendment Act 2010 A2010-8 (s 2 (2) and LA s 79)
Construction Occupations Legislation Amendment Act 2010 (No 2) A2010-32 pt 5
notified LR 1 September 2010
s 1, s 2 commenced 1 September 2010 (LA s 75 (1))
s 3 commenced 18 February 2011 (LA s 75AA)
s 33 commenced 18 February 2011 (s 2 and CN2011-2)
pt 5 remainder commenced 1 March 2011 (s 2 and LA s 79)
Construction Occupations (Licensing) Amendment Regulation 2010 (No 1) SL2010-36
notified LR 7 September 2010
s 1, s 2 commenced 7 September 2010 (LA s 75 (1))
remainder commenced 8 September 2010 (s 2)
Statute Law Amendment Act 2011 (No 3) A2011-52 sch 3 pt 3.11
notified LR 28 November 2011
s 1, s 2 commenced 28 November 2011 (LA s 75 (1))
sch 3 pt 3.11 commenced 12 December 2011 (s 2)
Planning and Building Legislation Amendment Act 2011 (No 2) A2011‑54 pt 4
notified LR 13 December 2011
s 1, s 2 commenced 13 December 2011 (LA s 75 (1))
pt 4 commenced 1 July 2012 (s 2 and CN2012-11)
Planning, Building and Environment Legislation Amendment Act 2013 A2013-15 pt 4
notified LR 21 May 2013
s 1, s 2 commenced 21 May 2013 (LA s 75 (1))
pt 4 commenced 22 May 2013 (s 2)
Construction and Energy Efficiency Legislation Amendment Act 2013 A2013-31 pt 7, sch 1
notified LR 26 August 2013
s 1, s 2 commenced 26 August 2013 (LA s 75 (1))
s 67 commenced 1 December 2013 (s 2 (2))
pt 7 remainder commenced 27 August 2013 (s 2 (3))
sch 1 commenced 1 September 2013 (s 2 (1))
Construction and Energy Efficiency Legislation Amendment Act 2014 A2014-2 pt 4
notified LR 5 March 2014
s 1, s 2 commenced 5 March 2014 (LA s 75 (1))
pt 4 commenced 6 March 2014 (s 2)
Construction and Energy Efficiency Legislation Amendment Act 2014 (No 2) A2014-10 pt 3
notified LR 17 April 2014
s 1, s 2 commenced 17 April 2014 (LA s 75 (1))
pt 3 commenced 18 April 2014 (s 2)
Gas Safety Legislation Amendment Act 2014 A2014-38 pt 3
notified LR 30 September 2014
s 1, s 2 commenced 30 September 2014 (LA s 75 (1))
pt 3 commenced 30 March 2015 (s 2 and LA s 79)
Training and Tertiary Education Amendment Act 2014 A2014‑48 sch 1 pt 1.6
notified LR 6 November 2014
s 1, s 2 commenced 6 November 2014 (LA s 75 (1))
sch 1 pt 1.6 commenced 20 November 2014 (s 2)
Dangerous Substances (Asbestos Safety Reform) Legislation Amendment Act 2014 A2014‑53 pt 5
notified LR 3 December 2014
s 1, s 2 commenced 3 December 2014 (LA s 75 (1))
pt 5 commenced 1 January 2015 (s 2)
Building (General) Legislation Amendment Regulation 2015 (No 1) SL2015-14 pt 3
notified LR 4 May 2015
s 1, s 2 commenced 4 May 2015 (LA s 75 (1))
pt 3 commenced 5 May 2015 (s 2 (1))
Planning, Building and Environment Legislation Amendment Act 2015 A2015‑12 pt 5
notified LR 20 May 2015
s 1, s 2 commenced 20 May 2015 (LA s 75 (1))
pt 5 commenced 21 May 2015 (s 2)
Spent Convictions (Historical Homosexual Convictions Extinguishment) Amendment Act 2015 A2015‑45 sch 1 pt 1.2
notified LR 6 November 2015
s 1, s 2 commenced 6 November 2015 (LA s 75 (1))
sch 1 pt 1.2 commenced 7 November 2015 (s 2)
Building and Construction Legislation Amendment Act 2016
A2016-44 pt 6
notified LR 19 August 2016
s 1, s 2 commenced 19 August 2016 (LA s 75 (1))
pt 6 commenced 20 August 2016 (s 2 (1))
Construction Occupations (Licensing) Amendment Regulation 2016 (No 1) SL2016-36
notified LR 22 December 2016
s 1, s 2 commenced 22 December 2016 (LA s 75 (1))
remainder commenced 23 December 2016 (s 2)
Statute Law Amendment Act 2017 A2017-4 sch 3 pt 3.8
notified LR 23 February 2017
s 1, s 2 commenced 23 February 2017 (LA s 75 (1))
sch 3 pt 3.8 commenced 9 March 2017 (s 2)
Construction Occupations (Licensing) Amendment Regulation 2017 (No 1) SL2017-33
notified LR 23 November 2017
s 1, s 2 commenced 23 November 2017 (LA s 75 (1))
remainder commenced 1 December 2017 (s 2)

4	Amendment history
Name of regulation
s 1	am R3 LA
Work in construction occupation
pt 1A hdg	ins SL2015‑14 s 17
Construction occupation of builder—excluded work—Act, s 6 (3) (b)
s 4A	ins SL2015‑14 s 17
Licence applications—Act, s 17 (3)
s 5	am A2005‑34 amdt 1.30, amdt 1.31; A2006‑16 amdt 1.34; A2009‑49 amdt 3.25; A2010‑24 s 36; A2010‑32 s 27; A2013‑31 ss 53-56; A2014‑53 s 20; pars renum R31 LA; A2015‑45 amdt 1.2; A2016‑44 s 80
Information required on licence—Act, s 23 (2)
s 6	am A2005‑34 amdt 1.32
Term of licences generally—Act, s 24
s 7	am A2013‑31 s 57; A2014‑53 s 21; A2014‑38 s 8; pars renum R32
Term of licence for building assessors, building surveyors, plumbing plan certifiers and works assessors—Act, s 24
s 8 hdg	sub A2010‑24 s 37; A2010‑32 s 28; A2014‑53 s 22
s 8	sub A2006‑16 amdt 1.35
	am A2010‑24 s 38; A2010‑32 s 29; A2013‑31 s 58; A2014‑53 s 23; pars renum R31 LA
Particulars in register
s 9	am A2006‑16 amdt 1.36; A2008‑36 amdt 1.122; A2010‑24 s 39; A2010‑32 s 30; A2013‑31 ss 59-61; pars renum R25 LA; A2014‑53 s 24; pars renum R31 LA
Eligibility for licence—qualifications and financial requirements—Act, s 18
s 13	am A2011‑52 amdt 3.47; A2013‑31 s 62, s 63; ss renum R25 LA
	sub A2016‑44 s 81
Skill assessment of individuals
s 14	am A2007‑12 amdt 1.9; A2013‑31 s 64; A2014‑48 amdt 1.9
Corporations and partnerships eligible for some occupations
s 15	am A2005‑34 amdt 1.33; A2006‑16 amdt 1.37; SL2010‑36 s 4; A2014‑53 s 25; pars renum R31 LA
Eligibility to be asbestos removalist
s 15A	ins A2006‑16 amdt 1.38
	om A2014‑53 s 26
Eligibility to be owner-builder
s 16	sub SL2016‑36 s 4
Eligibility to be asbestos assessor
s 16A	ins A2006‑16 amdt 1.39
	om A2014‑53 s 27
Eligibility to be building assessor
s 16B	ins A2010‑32 s 31
Eligibility to be building surveyor
s 17	am A2005‑34 amdt 1.34; A2006‑15 amdt 1.23
	sub A2006‑16 amdt 1.39
	am SL2006‑52 ss 4-6
Eligibility to be plumbing plan certifier
s 18	am A2006‑15 amdt 1.23
Eligibility to be works assessor
s 18A	ins A2010‑24 s 40
Eligibility to be nominee—Act, s 28 (6)
s 19 hdg	sub A2016‑44 s 82
s 19	am A2013‑31 s 65, s 66; A2016‑44 s 83
Comply with code of practice
s 21A	ins A2010‑32 s 32
	am A2016‑44 s 84
Corporate licences
s 22	am A2016‑44 s 85, s 86
Partnership licences
s 23	am A2016‑44 s 87, s 88
Individual licences
s 24	am A2010‑18 amdt 3.2
Certain building surveyors
s 28	am SL2004‑44 s 4
Endorsements on licences
div 5.2 hdg	sub SL2017‑33 s 4
Return of licence
s 29	reloc and renum as s 32A
Endorsing builders licences for building work—Act, s 22
s 30 hdg	sub A2005‑34 amdt 1.35
s 30	am A2005‑34 amdt 1.36
Endorsing building assessors licences for use of software—Act, s 22
s 31A	ins A2010‑32 s 33
Endorsing licences for gas appliance work—Act, s 22
s 31B	ins A2014‑38 s 9
Endorsing electricians licences for work on interval meters—Act, s 22
s 31C	ins SL2017‑33 s 6
Considerations for endorsing licences
s 32 hdg	sub SL2017‑33 s 7
s 32	sub A2006‑16 amdt 1.20
	am A2008‑36 amdt 1.123; A2010‑32 s 34; A2014‑38 s 10; SL2017‑33 s 8
Returning and replacing licences and unlicensed services
div 5.3 hdg	sub SL2017‑33 s 9
Return of licence
s 32A	(prev s 29) reloc and renum as s 32A SL2017‑33 s 5
Matters that may be published—Act, s 64 (1)
s 34	om A2008‑36 amdt 1.124
Services that may be provided without licence
s 35	am A2006‑16 amdt 1.40, amdt 1.41; ss renum R8 LA; A2007‑12 amdt 1.10; A2013‑15 s 8; A2013‑31 s 67, s 68; ss renum R27 LA; A2014‑48 amdts 1.10-1.14; A2014‑53 s 28, s 29; ss renum R31 LA; A2015‑12 s 37
Classes of asbestos assessor
s 36A	ins A2006‑16 amdt 1.42
	om A2014‑53 s 30
Classes of asbestos removalist
s 36B	ins A2006‑16 amdt 1.42
	om A2014‑53 s 31
Classes of building assessor
s 37B	ins A2010‑32 s 35
Notification and review of decisions
pt 6A hdg	ins A2008‑36 amdt 1.125
Classes of gas appliance worker
s 41A	ins A2014‑38 s 11
Reviewable decisions—Act, s 123A, def reviewable decision
s 42A	ins A2008‑36 amdt 1.125
Right of review and notice—Act, s 123B and s 123C (a)
s 42B	ins A2008‑36 amdt 1.125
Short descriptions and demerit points
s 43	sub A2008‑36 amdt 1.126
	am A2013‑31 s 69, s 70
Information in report to Minister—Act, s 112
s 44	am A2008‑36 amdt 1.127
Requirements for notices requesting skill assessment of licensees—Act, s 55A
s 45	pars renum R3 LA
	am A2005‑34 amdt 1.37
	om A2008‑36 amdt 1.128
	ins A2013‑31 s 71
Meaning of licensee and occupational discipline—s 9 (1) (i)
s 48	sub A2008‑36 amdt 1.129
Modification of Act, s 149—Act, s 152
s 52	ins SL2004‑44 s 5
	om R4 LA
	ins SL2005‑18 s 4
	exp 1 September 2005 (s 52)
Modification of Act, pt 13, s 137 (2)—Act, s 152
s 53	ins SL2004‑44 s 5
	om A2005‑34 amdt 1.38
Modification of Act, pt 13—Act, s 152
s 54	ins SL2004‑44 s 5
	om A2005‑34 amdt 1.38
Modification of Act, dictionary, definition of AS 3500—Act, s 152
s 55	ins SL2004‑44 s 5
	om A2005‑34 amdt 1.38
Transitional—Construction Occupations (Licensing) Amendment Regulation 2017 (No 1)
pt 9 hdg	ins SL2017‑33 s 10
	exp 28 February 2018 (s 58)
Meaning of authorised licensee—pt 9
s 56	ins SL2017‑33 s 10
	exp 28 February 2018 (s 58)
Authorisations under s 31C for undecided applications
s 57	ins SL2017‑33 s 10
	exp 28 February 2018 (s 58)
Expiry—pt 9
s 58	ins SL2017‑33 s 10
	exp 28 February 2018 (s 58)
Asbestos assessor
sch 1 pt 1.1A	renum as sch 1 pt 1.1
Asbestos removalist
sch 1 pt 1.1B	renum as sch 1 pt 1.2
Asbestos assessor
sch 1 pt 1.1	orig sch 1 pt 1.1 renum as sch 1 pt 1.3
	(prev sch 1 pt 1.1A) ins A2006‑16 amdt 1.43
	renum R8 LA (see A2006‑16 amdt 1.45)
	am A2011‑52 amdt 3.48
	om A2014‑53 s 32
Asbestos removalist
sch 1 pt 1.2	orig sch 1 pt 1.2 renum as sch 1 pt 1.4
	(prev sch 1 pt 1.1B) ins A2006‑16 amdt 1.43
	renum R8 LA (see A2006‑16 amdt 1.45)
	om A2014‑53 s 33
Builder
sch 1 pt 1.3	orig sch 1 pt 1.3 renum as sch 1 pt 1.5
	(prev sch 1 pt 1.1) am SL2004‑44 s 6
	renum R8 LA (see A2006‑16 amdt 1.45)
	am A2006‑16 amdt 1.44; A2015‑12 s 38, s 39
Building assessor
sch 1 pt 1.3A	ins A2010‑32 s 36
Building surveyor
sch 1 pt 1.4	orig sch 1 pt 1.4 renum as sch 1 pt 1.6
	(prev sch 1 pt 1.2) renum R8 LA (see A2006‑16 amdt 1.45)
Drainer
sch 1 pt 1.5	orig sch 1 pt 1.5 renum as sch 1 pt 1.7
	(prev sch 1 pt 1.3) renum R8 LA (see A2006‑16 amdt 1.45)
Electrician
sch 1 pt 1.6	orig sch 1 pt 1.6 renum as sch 1 pt 1.8
	(prev sch 1 pt 1.4) am SL2004‑44 s 7
	renum R8 LA (see A2006‑16 amdt 1.45)
	am SL2017‑33 s 11
Electrician
sch 1 pt 1.7	(prev sch 1 pt 1.5) renum R8 LA (see A2006‑16 amdt 1.45)
Gas appliance worker
sch 1 pt 1.7A	ins A2014‑38 s 12
Plumbers
sch 1 pt 1.8	(prev sch 1 pt 1.6) am SL2004‑44 s 8, s 9
	renum R8 LA (see A2006‑16 amdt 1.45)
	am A2006‑15 amdt 1.21; items renum R9 (see A2006‑15 amdt 1.22); A2013‑31 s 72
Works assessors
sch 1 pt 1.9	ins A2010‑24 s 41
	sub A2010‑24 s 42
Demerit grounds for occupational discipline
sch 2 hdg	sub A2008‑36 amdt 1.130
Builders licence demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.1 hdg	sub A2008‑36 amdt 1.131
sch 2 pt 2.1	am A2008‑36 amdt 1.132; A2011‑54 s 8; items renum R23 LA; A2013‑31 amdt 1.1; A2015‑12 s 40; items renum R34 LA
Building surveyors licence demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.2 hdg	sub A2008‑36 amdt 1.133
sch 2 pt 2.2	am A2007‑26 amdts 1.96-1.102; A2008‑36 amdt 1.134; SL2010‑36 s 5
Drainers licence demerit disciplinary grounds under Act, s 54 (1) (a)
sch 2 pt 2.3 hdg	sub A2008‑36 amdt 1.135
sch 2 pt 2.3	am A2005‑34 amdts 1.39-1.42; A2008‑36 amdt 1.136; A2013‑31 amdts 1.2-1.4
Electricians licence demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.4 hdg	sub A2008‑36 amdt 1.137
sch 2 pt 2.4	am A2008‑36 amdt 1.138
Gasfitters licence demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.5 hdg	sub A2008‑36 amdt 1.139
sch 2 pt 2.5	am A2008‑36 amdt 1.140; A2014‑38 ss 13-15
Plumbers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.6 hdg	sub A2008‑36 amdt 1.141
sch 2 pt 2.6	am A2005‑34 amdts 1.43-1.49; A2008‑36 amdt 1.142; A2013‑31 amdts 1.5-1.11
Plumbing plan certifiers licence demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.7 hdg	sub A2008‑36 amdt 1.143
sch 2 pt 2.7	am A2008‑36 amdt 1.144; A2013‑31 amdt 1.12
Works assessor licence demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.7A	ins SL2010‑36 s 6
All licences demerit grounds for occupational discipline—Act, s 55 (1) (a)
sch 2 pt 2.8 hdg	sub A2008‑36 amdt 1.145
sch 2 pt 2.8	am A2008‑36 amdt 1.146
Licence demerit grounds for occupational discipline under Act, s 55 (1) (other than par (a))
sch 3 hdg	sub A2008‑36 amdt 1.147
sch 3	am A2008‑36 amdt 1.148
Reviewable decisions
sch 4	ins A2008‑36 amdt 1.149
	mod SL2009‑2 mod 2.1
	mod lapsed 17 December 2009 (SL2009‑2 mod 2.1 om by A2009‑49 amdt 1.4)
	am A2009‑49 amdt 1.13; items renum R15 LA; A2010‑32 s 37; items renum R20 LA; A2011‑52 amdt 3.49; items renum R22 LA; A2013‑31 s 73, s 74; items renum R25 LA; A2014‑2 s 21; A2014‑10 s 24; items renum R29 LA; A2014‑38 s 16; items renum R32; SL2017‑33 s 12; items renum R39 LA
Dictionary
dict	am A2009‑49 amdt 3.26; SL2010‑36 s 7, s 8; A2017‑4 amdt 3.46
	def bonded asbestos ins A2006‑16 amdt 1.46
	sub A2011‑52 amdt 3.50
	om A2014‑53 s 34
	def electrical installation ins A2005‑34 amdt 1.50
	def fire sprinkler work sub SL2004‑44 s 10
	def friable asbestos ins A2006‑16 amdt 1.46
	om A2011‑52 amdt 3.51
	def incidental electrical work sub A2005‑34 amdt 1.51
	am SL2017‑33 s 13
	def interval metering work ins SL2017‑33 s 14
	def storey ins A2017‑4 amdt 3.47
	def unit title assessment report ins SL2010‑36 s 9

5	Earlier republications
Some earlier republications were not numbered. The number in column 1 refers to the publication order.  
Since 12 September 2001 every authorised republication has been published in electronic pdf format on the ACT legislation register.  A selection of authorised republications have also been published in printed format. These republications are marked with an asterisk (*) in column 1.  Electronic and printed versions of an authorised republication are identical. 

Republication No and date	Effective	Last amendment made by	Republication for	
R1
1 Sept 2004	1 Sept 2004–
8 Sept 2004	not amended	new regulation	
R2
9 Sept 2004	9 Sept 2004–
2 Nov 2004	SL2004‑44	amendments by SL2004‑44	
R3
3 Nov 2004	3 Nov 2004–
9 Mar 2005	SL2004‑44	editorial amendments under Legislation Act	
R4
10 Mar 2005	10 Mar 2005–
26 July 2005	SL2004‑44	commenced expiry	
R5
27 July 2005	27 July 2005–
26 Aug 2005	A2005‑34	amendments by A2005‑34	
R6
27 Aug 2005	27 Aug 2005–
1 Sept 2005	SL2005‑18	amendments by SL2005‑18	
R7
2 Sept 2005	2 Sept 2005–
30 June 2006	SL2005‑18	commenced expiry	
R8
1 July 2006	1 July 2006–
31 Aug 2006	A2006‑24	amendments by A2006‑16 as amended by A2006‑24	
R9
1 Sept 2006	1 Sept 2006–
17 Nov 2006	A2006‑24	amendments by A2006‑15	
R10
18 Nov 2006	18 Nov 2006–
4 Dec 2006	A2006‑24	amendments by A2006‑16	
R11
5 Dec 2006	5 Dec 2006–
30 June 2007	SL2006‑52	amendments by SL2006‑52	
R12
1 July 2007	1 July 2007–
30 Mar 2008	A2007‑12	amendments by A2007‑12	
R13
31 Mar 2008	31 Mar 2008–
1 Feb 2009	A2007‑26	amendments by A2007‑26	
R14*
2 Feb 2009	2 Feb 2009–
16 Dec 2009	SL2009‑2	amendments by A2008‑36 and modifications by SL2009‑1	
R15
17 Dec 2009	17 Dec 2009–
2 June 2010	A2009‑49	amendments by A2009‑49	
R16
3 June 2010	3 June 2010–
2 Sept 2010	A2010‑18	amendments by A2010‑18	
R17
3 Sept 2010	3 Sept 2010–
7 Sept 2010	A2010‑32	amendments by A2010‑24	
R18
8 Sept 2010	8 Sept 2010–
17 Feb 2011	SL2010‑36	amendments by SL2010‑36	
R19
18 Feb 2011	18 Feb 2011–
28 Feb 2011	SL2010‑36	amendments by A2010‑32	
R20
1 Mar 2011	1 Mar 2011–
7 July 2011	SL2010‑36	amendments by A2010‑32	
R21
8 July 2011	8 July 2011–
11 Dec 2011	SL2011‑36	amendments by A2010‑24	
R22
12 Dec 2011	12 Dec 2011–
30 June 2012	A2011‑52	amendments by A2011‑52	
R23
1 July 2012	1 July 2012–
21 May 2013	A2011‑54	amendments by A2011‑54	
R24
22 May 2013	22 May 2013–
26 Aug 2013	A2013‑15	amendments by A2013‑15	
R25
27 Aug 2013	27 Aug 2013–
31 Aug 2013	A2013‑31	amendments by A2013‑31	
R26
1 Sept 2013	1 Sept 2013–
30 Nov 2013	A2013‑31	amendments by A2013‑31	
R27
1 Dec 2013	1 Dec 2013–
5 Mar 2014	A2013‑31	amendments by A2013‑31	
R28
6 Mar 2014	6 Mar 2014–
17 Apr 2014	A2014-2	amendments by A2014-2	
R29
18 Apr 2014	18 Apr 2014–
19 Nov 2014	A2014-10	amendments by A2014-10	
R30
20 Nov 2014	20 Nov 2014–
31 Dec 2014	A2014-48	amendments by A2014-48	
R31
1 Jan 2015	1 Jan 2015–
29 Mar 2015	A2014‑53	amendments by A2014‑53	
R32
30 Mar 2015	30 Mar 2015–
4 May 2015	A2014‑53	amendments by A2014-38	
R33
5 May 2015	5 May 2015–
20 May 2015	SL2015-14	amendments by SL2015-14	
R34
21 May 2015	21 May 2015–
6 Nov 2015	A2015‑12	amendments by A2015‑12	
R35
7 Nov 2015	7 Nov 2015–
19 Aug 2016	A2015‑45	amendments by A2015‑45	
R36
20 Aug 2016	20 Aug 2016–
22 Dec 2016	A2016‑44	amendments by A2016‑44	
R37
23 Dec 2016	23 Dec 2016–
8 Mar 2017	SL2016-36	amendments by SL2016-36	
R38
9 Mar 2017	9 Mar 2017–
30 Nov 2017	A2017‑4	amendments by A2017‑4	

©  Australian Capital Territory 2017