Australian Capital Territory
Machinery Act 1949    
A1949-11
Republication No 7
Effective:  29 September 2009 – 30 June 2011
Republication date: 29 September 2009
Last amendment made by A2009-19

Unauthorised version prepared by ACT Parliamentary Counsel’s Office

About this republication
The republished law
This is a republication of the Machinery Act 1949 (including any amendment made under the Legislation Act 2001, part 11.3 (Editorial changes)) as in force on 29 September 2009.  It also includes any amendment, repeal or expiry affecting the republished law to 29 September 2009.  
The legislation history and amendment history of the republished law are set out in endnotes 3 and 4. 
Kinds of republications
The Parliamentary Counsel’s Office prepares 2 kinds of republications of ACT laws (see the ACT legislation register at www.legislation.act.gov.au):
•	authorised republications to which the Legislation Act 2001 applies
•	unauthorised republications.
The status of this republication appears on the bottom of each page.
Editorial changes
The Legislation Act 2001, part 11.3 authorises the Parliamentary Counsel to make editorial amendments and other changes of a formal nature when preparing a law for republication.  Editorial changes do not change the effect of the law, but have effect as if they had been made by an Act commencing on the republication date (see Legislation Act 2001, s 115 and s 117).  The changes are made if the Parliamentary Counsel considers they are desirable to bring the law into line, or more closely into line, with current legislative drafting practice.  
This republication does not include amendments made under part 11.3 (see endnote 1).
Uncommenced provisions and amendments
If a provision of the republished law has not commenced or is affected by an uncommenced amendment, the symbol  U  appears immediately before the provision heading.  The text of the uncommenced provision or amendment appears only in the last endnote.
Modifications
If a provision of the republished law is affected by a current modification, the symbol  M  appears immediately before the provision heading.  The text of the modifying provision appears in the endnotes.  For the legal status of modifications, see Legislation Act 2001, section 95.
Penalties
The value of a penalty unit for an offence against this republished law at the republication date is—
	(a)	if the person charged is an individual—$100; or
	(b)	if the person charged is a corporation—$500.

Australian Capital Territory
Machinery Act 1949

Contents
	Page
	1	Name of Act	2
	2	Dictionary	2
	2A	Notes	2
	3	Chief Inspector of Machinery	2
	4	Inspectors of machinery	3
	5	Determination of fees	3
	6	Approved forms	3
	7	Regulation-making power	4
Dictionary		5
Endnotes
	1	About the endnotes	6
	2	Abbreviation key	6
	3	Legislation history	7
	4	Amendment history	8
	5	Earlier republications	10

Australian Capital Territory
Machinery Act 1949

An Act relating to the installation, use, inspection and operation of machinery

    

1	Name of Act
This Act is the Machinery Act 1949.
2	Dictionary
The dictionary at the end of this Act is part of this Act.
Note 1	The dictionary at the end of this Act defines certain terms used in this Act.
Note 2	A definition in the dictionary applies to the entire Act unless the definition, or another provision of the Act, provides otherwise or the contrary intention otherwise appears (see Legislation Act, s 155 and s 156 (1)).
2A	Notes
A note included in this Act is explanatory and is not part of this Act.
Note	See the Legislation Act, s 127 (1), (4) and (5) for the legal status of notes.
3	Chief Inspector of Machinery
The chief executive must appoint a public servant as the Chief Inspector of Machinery.
Note 1	For the making of appointments (including acting appointments), see the Legislation Act, pt 19.3. 
Note 2	In particular, an appointment may be made by naming a person or nominating the occupant of a position (see Legislation Act, s 207).
4	Inspectors of machinery
	(1)	The chief executive may appoint a person to be an inspector for this Act.
Note 1	For the making of appointments (including acting appointments), see the Legislation Act, pt 19.3. 
Note 2	In particular, an appointment may be made by naming a person or nominating the occupant of a position (see Legislation Act, s 207).
	(2)	The chief inspector is also an inspector.
5	Determination of fees
	(1)	The Minister may, in writing, determine fees for this Act.
Note	The Legislation Act 2001 contains provisions about the making of determinations and regulations relating to fees (see pt 6.3).
	(2)	A determination is a disallowable instrument.
Note	A disallowable instrument must notified, and presented to the Legislative Assembly, under the Legislation Act 2001.
6	Approved forms
	(1)	The Minister may, in writing, approve forms for this Act.
	(2)	If the Minister approves a form for a particular purpose, the approved form must be used for that purpose.
Note	For other provisions about forms, see the Legislation Act, s 255.
	(3)	An approved form is a notifiable instrument.
Note	A notifiable instrument must be notified under the Legislation Act 2001.
7	Regulation-making power
	(1)	The Executive may make regulations for this Act.
Note	Regulations must be notified, and presented to the Legislative Assembly, under the Legislation Act 2001.
	(2)	The regulations may make provision in relation to—
	(a)	regulating the installation, use and operation of machinery; and 
	(b)	securing the safety of people and property from injury or damage arising out of the installation, use or operation of machinery; and
	(c)	the registration, inspection and testing of machinery; and
	(d)	requiring licences or certificates to be held for the installation, use, operation, inspection or testing of machinery, and the granting, suspension and cancellation of licences and certificates; and
	(e)	the precautions to be taken to secure the safety of people employed at or in relation to machinery; and
	(f)	the functions (including powers of entry) of the chief inspector and inspectors; and 
	(g)	prohibiting the employment of anyone younger than the prescribed age in relation to any prescribed machinery.
	(3)	The regulations may also prescribe offences for contraventions of the regulations and prescribe maximum penalties of not more than 10 penalty units for offences against the regulations.

Dictionary
(see s 2)
Note 1	The Legislation Act contains definitions and other provisions relevant to this Act.
Note 2	For example, the Legislation Act, dict, pt 1, defines the following terms:
·	chief executive (see s 163)
·	Minister (see s 162).
chief inspector means the Chief Inspector of Machinery under section 3.
inspector means an inspector under section 4.
machinery includes any machine, boiler, pressure vessel, engine, motor or source of motive power, and any shaft, belt, gearing, pulley, flywheel, lift, crane, contrivance or appliance operated by machinery.
Note 1	A definition applies except so far as the contrary intention appears (see Legislation Act 2001, s 155).
Note 2	A reference to an Act includes a reference to the statutory instruments made or in force under the Act, including regulations (see Legislation Act 2001, s 104).

Endnotes
1	About the endnotes
Amending and modifying laws are annotated in the legislation history and the amendment history.  Current modifications are not included in the republished law but are set out in the endnotes.
Not all editorial amendments made under the Legislation Act 2001, part 11.3 are annotated in the amendment history.  Full details of any amendments can be obtained from the Parliamentary Counsel’s Office.
Uncommenced amending laws and expiries are listed in the legislation history and the amendment history.  These details are underlined.  Uncommenced provisions and amendments are not included in the republished law but are set out in the last endnote.
If all the provisions of the law have been renumbered, a table of renumbered provisions gives details of previous and current numbering.  
The endnotes also include a table of earlier republications.
2	Abbreviation key

am = amended	ord = ordinance	
amdt = amendment	orig = original	
ch = chapter	par = paragraph/subparagraph	
def = definition	pres = present	
dict = dictionary	prev = previous	
disallowed = disallowed by the Legislative 	(prev...) = previously	
Assembly	pt = part	
div = division	r = rule/subrule	
exp = expires/expired	renum = renumbered	
Gaz = gazette	reloc = relocated	
hdg = heading	R[X] = Republication No	
IA = Interpretation Act 1967	RI = reissue	
ins = inserted/added	s = section/subsection	
LA = Legislation Act 2001	sch = schedule	
LR = legislation register	sdiv = subdivision	
LRA = Legislation (Republication) Act 1996	sub = substituted	
mod = modified/modification	SL = Subordinate Law	
o = order	underlining = whole or part not commenced	
om = omitted/repealed	or to be expired	

3	Legislation history
The Machinery Act 1949 was originally the Machinery Ordinance 1949.  It became an ACT Act on self-government (11 May 1989).
Before 11 May 1989, ordinances commenced on their notification day unless otherwise stated (see Seat of Government (Administration) Act 1910 (Cwlth), s 12).
	Legislation before self-government
Machinery Act 1949 No 11
notified 13 October 1949
commenced 13 October 1949
as amended by
Ordinances Revision (Decimal Currency) Ordinance 1966 No 19 (as am by ord 1967 No 36)
notified 23 December 1966
commenced 23 December 1966
Machinery (Amendment) Ordinance 1983 No 29
notified 29 September 1983
commenced 1 October 1983
Self-Government (Consequential Amendments) Ordinance 1989 No 38 sch 1 
notified 10 May 1989 (Cwlth Gaz 1989 No S160)
s 1, s 2 commenced 10 May 1989 (s 2 (1))
sch 1 commenced 11 May 1989 (s 2 (2) and see Cwlth Gaz 1989 No S164)
	Legislation after self-government
Acts Revision (Position of Crown) Act 1993 No 44 sch 2
notified 27 August 1993 (Gaz 1993 No S165)
sch 2 commenced 27 August 1993 (s 2)
Statute Law Revision (Penalties) Act 1994 No 81 sch
notified 29 November 1994 (Gaz 1994 No S253)
s 1, s 2 commenced 29 November 1994 (s 2 (1))
sch commenced 29 November 1994 (s 2 (2) and Gaz 1994 No S269)

Statutory Offices (Miscellaneous Provisions) Act 1994 No 97 sch pt 1
notified 15 December 1994 (Gaz 1994 No S280)
s 1, s 2 commenced 15 December 1994 (s 2 (1))
sch pt 1 commenced 15 December 1994 (s 2 (2) and Gaz 1994 No S293)
Statute Law Revision Act 1995 No 46 sch
notified 18 December 1995 (Gaz 1995 No S306)
sch commenced 18 December 1995 (s 2)
Occupational Health and Safety (Amendment) Act 1997 No 44 s 10, sch
notified 19 September 1997 (Gaz 1997 No S264)
s 10, sch never commenced and rep 2001 No 11 pt 4.3
Legislation (Consequential Amendments) Act 2001 No 44 pt 234
notified 26 July 2001 (Gaz 2001 No 30)
s 1, s 2 commenced 26 July 2001 (IA s 10B)
pt 234 commenced 12 September 2001 (s 2 and see Gaz 2001 No S65)
Statute Law Amendment Act 2007 A2007-3 sch 3 pt 3.64
notified LR 22 March 2007
s 1, s 2 taken to have commenced 1 July 2006 (LA s 75 (2))
sch 3 pt 3.64 commenced 12 April 2007 (s 2 (1))
Justice and Community Safety Legislation Amendment Act 2009 (No 2) A2009-19 pt 10
notified LR 1 September 2009
s 1, s 2 commenced 1 September 2009 (LA s 75 (1))
pt 10 commenced 29 September 2009 (s 2)
4	Amendment history
Name of Act
s 1	sub A2007-3 amdt 3.354
Dictionary
s 2	am 2001 No 44 amdt 1.2738
	defs reloc to dict A2007-3 amdt 3.355
	sub A2007-3 amdt 3.356
	def this Act om 2001 No 44 amdt 1.2737
Notes
s 2A	ins A2007-3 amdt 3.356
Chief Inspector of Machinery
s 3	om 1993 Act No 44 sch 2
	ins 1994 No 97 sch 1
	sub A2007-3 amdt 3.357
	(2)-(4) exp 12 April 2008 (s 3 (4) (LA s 88 declaration applies))
Inspectors of machinery
s 4	sub 1994 Act No 97 sch 1; A2007-3 amdt 3.357
	(3)-(5) exp 12 April 2008 (s 4 (5) (LA s 88 declaration applies))
	am A2009-19 s 55
Power of Minister to determine fees
s 4A	ins 1983 No 29
	om 2001 No 44 amdt 1.2739
Fees payable
s 4B	ins 1983 No 29
	am 1989 No 38 sch 1
	om 2001 No 44 amdt 1.2739 sch 1
Determination of fees
s 5	am 1966 No 19 (as am 1967 No 36); 1983 No 29; 1989 No 38 sch 1; 1994 No 81 sch; 1994 No 97 sch pt 1; 1995 No 46 sch
	sub 2001 No 44 amdt 1.2739
Approved forms
s 6	ins 2001 No 44 amdt 1.2739
	am A2007-3 amdt 3.358
Regulation-making power
s 7	ins 2001 No 44 amdt 1.2739
Dictionary
dict	ins A2007-3 amdt 3.359
	def chief inspector ins 1994 No 97 sch pt 1
	reloc from s 2 A2007-3 amdt 3.355
	def inspector ins 1994 No 97 sch pt 1
	reloc from s 2 A2007-3 amdt 3.355
	def machinery reloc from s 2 A2007-3 amdt 3.355

5	Earlier republications
Some earlier republications were not numbered. The number in column 1 refers to the publication order.  
Since 12 September 2001 every authorised republication has been published in electronic pdf format on the ACT legislation register.  A selection of authorised republications have also been published in printed format. These republications are marked with an asterisk (*) in column 1.  Electronic and printed versions of an authorised republication are identical. 

Republication No	Amendments to	Republication date	
1	Ord 1989 No 38	30 June 1991	
2	Act 1994 No 97	28 February 1995	
3	Act 1995 No 46	30 November 1996	
4	A2001-44	4 January 2002	
5	A2007-3	12 April 2007	
6	A2007-3	13 April 2008	

©  Australian Capital Territory 2009