Australian Capital Territory
Electricity Safety (Fees) Determination 2012 (No 1)
Disallowable Instrument DI 2012-166
made under the
Electricity Safety Act 1971, s 64 (Determination of fees)

1.	Name of Instrument
This instrument is the Electricity Safety (Fees) Determination 2012 (No 1).

2.	Commencement
This instrument commences on 1 July 2012.

3.	Determination of fees
The fees set out in Column 4 of the schedule are determined.

4.	Payment of fees
The determined fees are payable to the ACT Government by a person requesting the goods or services described in the attached Schedule.

5.	Revocation
DI 2011- 175 notified on the legislation register on 28 June 2011 is revoked.

Simon Corbell
Minister for the Environment and Sustainable Development
28 June 2012

Section 64	Additions and alterations.
Only payable in instances when the Building Levy is not payable.	192.50 per book of ten or 21.40 per notice	199.00 per book of ten or 22.10 per notice	
Section 64
	Electrical wiring work for a new building or structure of class 1 and/or an associated structure of class 10a.
Only payable in instances when the Building Levy is not payable.	192.50
As described in the notes to the Schedule	199.00
As described in the notes to the Schedule	
Section 64
	Electrical wiring work to replace, extend or modify the electrical installation relating to consumer mains or sub-mains in an existing building or structure of class 1 and/or an associated structure of class 10a
Only payable in instances when the Building Levy is not payable.	192.50 
As described in the notes to the Schedule	199.00 
As described in the notes to the Schedule	
Section 64
	Electrical wiring work for a new building or structure of class 2 to 10 (where the class 10 is not associated with a building or structure of class 1)
Only payable in instances when the Building Levy is not payable.	192.50
Per switchboard,
distribution board, floor level or
unit as described in the notes for
the schedule.	199.00
Per switchboard,
distribution board, floor level or
unit as described in the notes for
the schedule.	
Section 64
	Electrical wiring work to replace, extend or modify the electrical installation in an existing class 2to 10 (where the class 10 is not associated with a building or structure of class 1)
Only payable in instances when the Building Levy is not payable.	192.50
As described in the notes to the Schedule	199.00
As described in the notes to the Schedule	
Section 64	Electrical Installation Re-Inspection	192.50	199.00	
	First Re-inspection	385.00	398.00	
	Second Re-inspection	770.00	797.00	
	Third and subsequent re-inspections	1540.10	1594.00	

Notes for the schedule
For building of Class 1 and 10 when 10 is associated with class 1

Class 		Item 						Fee Multiplier

New Work
Main Switch Board 
Main SwitchBoard 					1
POS Incorporated in MSB 				0
POS Separate from MSB 				0
Meter Cubicle / Box 					0

Distribution Boards 
1st DB 						0
> 1 DB 						0

Temporary Supply
At MSB 						0
Pole mount or separate from MSB	 		0

Co-Generation
Control DB (where separate from MSB)	 	1
Per Type Per Location 				1
Per Inverter > 1 					1

Additions &
Alterations
The Fee Multiplier as per New applies to work that is required to be inspected. Additions and Alterations work is on an algorithm that typically calls up 1 in 10 Certificates Of Electrical Safety to be inspected, unless defect notice issued then a higher rate of inspection applies. A fee will apply for all CES forms that require an inspection.

Notes for the schedule
For building of Class 2 to 10 (when 10 is not associated with class 1)
Class 		Item 						Fee Multiplier

New Work
Main Switch Board
1st Main SwitchBoard 				2
> 3m: per 3 Metres 					1
> than 1 supply: per Supply 				1
With Safety Services 					1
POS Incorporated in MSB 				0
POS Separate from MSB 				1
Power Factor Correction 				0
Meter Cubicle / Box 					1

Distribution Boards
1st DB							1
With Safety Services 					1
Split Services: Per Service
(Example: Tenant + House) 				1
Rising Main T-off Box 				0

Mechanical Boards
1st Mechanical Board 				2
> 3m: per 3 Metres 					1
With Safety Services 					1
> than 1 supply: Points per Supply 			1
Addition DB & Sub Boards: Per DB
(Example: Hydraulic services, Control Panels) 	1

Co-Generation
Control DB 						1
Per Type Per Location 				1
Per Inverter > 1 					1

Additions &
Alterations
The Fee Multiplier as per New applies to work that is required to be inspected. Additions and Alterations work is on an algorithm that typically calls up 1 in 10 Certificates Of Electrical Safety to be inspected, unless defect notice issued then a higher rate of inspection applies. A fee will apply for all CES forms that require an inspection.