Australian Capital Territory
Land Titles (Unit Titles) Format Requirements for Units Plans Approval 2011
Notifiable instrument NI2011–535
made under the  
Land Titles (Unit Titles) Act 1970, Schedule 1, Part 1.1

1	Name of instrument
This instrument is the Land Titles (Unit Titles) Format Requirements for Units Plans Approval 2011.
2	Commencement 
This instrument commences the day after the date of notification.

3	Approval
I specify the format requirements in the Schedule of this instrument for the purposes of Schedule 1, Part 1.1.

Mark McCabe
Registrar-General
7 September 2011

THIS IS PAGE 1 OF SCHEDULE 1 TO THE INSTRUMENT MADE UNDER Land Titles (Unit Titles) Act 1970, section 6

Format requirements for sheets provided in hard copy:
1.  Each sheet must be provided in duplicate. One copy must be on good quality tracing linen or film free from discolouration and blemish, and the other copy must be on good quality paper free from discolouration and blemish.
2.  All sheets must be without creases on the size known as International B4 or A3.
3.  The contents of a sheet must be placed on only one side of the sheet within a border that is at least 15mm from each edge of the sheet.
4.  No printing, writing or diagram (other than the reference to the sheet number) must extend into a margin on the page.
5.  An alteration must be made by striking through the matter to be altered and not by rubbing, scraping or cutting the surface of the sheet.  The alteration must be legible and in ink.
6.  All sheets must be numbered consecutively starting with the figure 1 and on each sheet there must be stated the total number of sheets comprising the units plan.

Format requirements for a data set:
1.  All pages must be numbered consecutively starting with the figure 1, and on each page there must be stated the total number of pages comprising the units plan.